Features:
Made of high tensile casting, stress relieved, seasoned against distortion.
Ideal tools for layout, inspection and machining.
Supplied in match pairs & numbered.
Equality of each matched pair in good standard.
MLC-V235 Continuous Casting Mold Level Automatic Measurement System Overview The automatic control for the molten steel level of the mold is one of the key technologies of continuous casting production. It is very important to reduce the labor intensity of workers, improve production efficiency, improve the quality and output of casting billet, reduce overflow and breakout of steel and improve the management level of steelmaking and continuous casting. The molten steel is poured into the mold. In order to prevent overflow, the molten steel level must be kept stable. Otherwise, during the casting process, if the level will fluctuate too much, and slag will be involved, forming surface slag inclusion on the surface of the casting billet, affecting the quality of the billet. The test points out that the relationship between the level fluctuation and the depth of casting billet surface slag inclusion is as follows: The experience has shown that surface slag inclusions can be eliminated when the level fluctuation is within 10mm. At the same time, if the level fluctuation is more than 10mm, the rate of longitudinal cracks on the casting billet surface is 30%. It means that the level fluctuation directly affects the surface quality of the casting billet. The principle of the system The eddy current type molten steel level gauge is the key to the system. The system operates reliably and has excellent performance: high temperature resistance, strong anti-interference ability, fast dynamic response (lag time
Supplier: Cast iron products, MS casting products, manganese steel casting products, hi- chrome grinding media balls, high nickel liner plates, jaw plate, metric weight, balance weight unit, flywheel, grinding media, grinding media balls, flour mill plates, flour mill
Supplier: Casting, including gray iron castings, ductile iron castings, sand casting aluminum, and precision castings, castiron plate and packaging machinery, measuring machine
Our cast iron weights are made using high quality cast iron that ensures their high durability and strength. The stackable cast iron weights that we offer can be availed in bulk. We assure that each and every piece is highly precise and efficient. Sizes : 50g, 100g, 200, g500g, 1kg, 2kg, 5kg, 10kg, 20kg, 50kg
Supplier: Graded grey iron castings(rough & machined), flywheels, pressure plates, pulleys, clutch plates, hubs & covers for drives of automobiles, earth moving equipments & other heavy duty vehicles, casting weight range from 0.50 kgs. to 250 kgs.
Supplier: Metallurgical testing equipment, continuous casting measurement and control device, steel casting, breakout prediction system, ladle slag detection system, mold expert system, continuous casting billet detection system, roll gap measuring instrument system, ladle thickness measurement system, continuous casting measurement and control device
Services: Manufacturer
Supplier: Cast iron weights, weighing scales, measuring instruments, personal weighers, platform scales, tabletop scales
Meter diameter (mm): And the connection mode 25,40,50,65,80,100,125,150,200,250,300 use flange connection Precision grade ±1.5%R,±1.0%R,±0.75%R(special) Quantity range: 1:10;1:20;1:30 Instrument material: 304 stainless steel;Impeller: anticorrosive ABS or high quality aluminum alloy;Monitor: cast aluminum Measured medium temperature (?) : -30?~+80? Environmental conditions of temperature :-20?~+60? , relative humidity 5%~90% , atmospheric pressure 86 ~ 106 kpa The output signal Sensors pulse frequency signal, the low level 0.8 V or less, high level 8 V or higher two wire system 4 ~ 20 madc current signal Power supply VOLTAGE + 12 VDC and + 24 VDC (optional) + 24 VDC Display type instrument comes with 3 v lithium battery Signal transmission line STVPV3 x 0.3 (three-wire system), 2 x 0.3 (two wire) transmission distance =1000m Protection IP65 Explosion-proof grade basic ExdIIBT6
# Callipers Measuring range of 0-1000 mm; # With and without fine tunning; # Material – constructional or stainless steel; # Mat chromed scale; # Reading – 0.1 and 0.05 mm. # Special callipers 3-point vernier calliper; # 5-point vernier calliper; # Marking-off vernier calliper; # Weld seam gauge; # Other types. # Vernier depth gauges Measuring range of 0-500 mm; # Reading 0.1 and 0.05 mm; # Material – constructional or stainless steel; # Mat chromed scale. # Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm; # Reading – 0.01 mm; # Measurement reading surface of hard alloys (carbide). Range 0-25 mm. # Coordinate small size tables One-coordinate; # Two-coordinate; # Three-coordinate; # Stroke along the coordinate: 0-25 mm # Measuring stands Type A2 – with magnetic switch at the base; # Type A4 – with cast-iron base and T-shaped groove; # Type B3 – with square-riffled table; # Micrometer holder. # Smooth gauges Plug gauges – one sided; # Plug gauges – two sided; # Snap gauges. # Thread gauges Thread plug calipers – one sides; # Thread plug calipers – two sides; # Thread ring gauges. # Smooth rings Reference rings; # Setting rings Range: 6-150 mm. # Squares and rulers Flat squares; # Squares with base; # Checking rulers; # Templates. # Angle gauges Protractor with lock screw Range 80x120 – 300x500 mm; # Protractor with sliding rod Range 120x240 – 300x500 mm Reading - 1° # Marking-off tools (scribers) Straight scriber – one sided (with knurled handle); # Bended tip scriber – two sided (with knurled handle); # Trammel for tracing and marking with small base; # Vernier caliper with two needles and fine adjustment; # Height gauge with fine adjustment.
