Chemical: Aluminium Sulphate
Ingredient: Al2O3: 17.
Features: For fast removal of suspended matter in pool water.
Appearance: Powder/ granule /tablet
Size:
0.5kg(or 1lb),1kg(or 2lb),2kg(or 5lb),3kg,4kg(or 10lb),8kg and 10kg of Pillow Bags,Doy Packs,Gusseted Bags and etc.
0.5kg (or 1lb),1kg (or 2lb),2kg (or 5lb),3kg,4kg (or 10lb),8kg and 10kg of Pails, Jars, Jugs,Pots,Tubes,Drums and etc.
Used for products, acetic anhydride, vinyl acetate, acetic acid esters, acetic acid
Acetic acid fiber and chlorine acetic acid, etc. It is an important raw material,
Synthetic fiber adhesive, and dyes,
Medicine, pesticide, also is a good organic solvents. It is widely used in plastic,
Rubber glue, printing, etc.
25kg plastic packaging, 20 foot container with 18 tons, needs a tray.
We supply formic acid,Purity,90% or 85%
CAS NO. 64-18-6
Colorless transparent liquid,
Package, 25kgs plastic drum,
Usage: pesticide, chemical, leather, textile and so on.
we can accept T/T and L/C, and the goods can be delivered within 10 days after your order.
Specification for formic acid 90%
Acidity%--------------------------90.0% min
Chlorides, as CL %---------------0.003 max
Sulphates (as SO4)%---------------0.001 max
Metals, as Fe %-------------------0.0004 max
Non-volatiles %-------------------0.020 max
Specification for formic acid 85%
Color index platinum cobalt%----------------------10 max
Purity%-------------------------------------------------85 min
Sulphates (as SO4)%----------------------------------0.002 max
Chlorides, as CL %------------------------------------0.005 max
Iron as Fe %--------------------------------------------0.0005 max
Ignition residue %-------------------------------------0.020 max.
D201 is a high capacity, shock resistant, macroporous,Type I ,strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, tough, uniform, spherical beads. D201 has a high operating capacity, especially on high-FMA feedwaters, as well as a high reversible sorptive capacity for complex organic materials, such as the fulvic and humic acids which occur in many surface water supplies.
It is recommended for use in waters with low silica loads. For high silica
waters, a type 1 anion resin such as Pure D201 is recommended.
Typical physical & Chemical characteristics:
Polymer Matrix Structure: Styrene Crosslinked with DVB
Physical Form and Appearance: Opaque beads
Whole Bead Count: 95% min.
Functional Groups: R-N(CH3)2(C2H4OH)+
Ionic Form ,as shipped: CL
Total Exchange Capacity, CL- form, wet, volumetric
1.2 eq/l min.
Moisture Retention, CL- form: 47-57%
Particle Size Range: +1.2 mm <5%, -0.3 mm <1%
Swelling CL-¡ú OH-: 10% max
Shipping Weight (approx.): 680-730 g/l
PH Range, Stability: 0 - 14.
25L /bag,1000L /big bag with pallet.
2493 Water Treatment Chemicals Suppliers
Short on time? Let Water Treatment Chemicals sellers contact you.
MB101 is a high quality resin mixture for direct purification of water. It is suitable for use in regenerable or non-regenerable cartridges and in large ion exchange units. Passage of water at recommended flow rates through the resin as supplied can achieve almost complete reduction of total dissolved solids. The residuals produce average conductivity values of about 0.1 µs cm-1 for a major portion of the service run which may be extended depending upon the final water quality acceptable. Equivalent volumes of ultra pure water may be obtained after regeneration but only if sufficient regenerant quantities are employed to achieve the percentage conversion levels equivalent to those of the "as supplied" resin. Generally acceptable capacity and quality is obtained economically at lower regeneration
Typical physical & Chemical characteristics:
Guaranteed Sales Specification Units OH - Form H + Form
Polymer Matrix Structure - Gel PolyStyrene Crosslinked with DVB
Anion Cation
Functional Group - Quaternary Amine Sulfonic acid
Volume ratio - 60% 40%
Total Exchange Capacity, min. meq/l 1.30 1.9
Water Retention Capacity % 53-60 45-50
Particle Size Distribution - - -
>1.25 mm max. % 5 5
<0.40 mm, max % 2 2
Whole Bead Count, min. % 95 95
Moisture Content as shipped, max - 65%
PH Range, Stability - 0-14
Shipping weight (approx.) - 705-740 g/l
Ionic conversion, min. % 90 99
D301 is a very high capacity, bead form, weak base, macroporous type, anion resin made by epoxy polyamine condensation. It is a spherical bead form resin(unlike other granular formulations) suitable for use in high flowrate applications. The exceptionally high operating capacity and regeneration efficiency of D301 make it ideal for applications where the maximum possible throughput and minimum chemical dose are required.
Typical physical & Chemical characteristics:
Polymer Matrix Structure: Styrene Crosslinked with DVB
Physical Form and Appearance: yellow spherical beads
Whole Bead Count: 95% min.
Functional Groups: R-N(CH3)2 Tertiary Amine
Ionic Form ,as shipped: Free Base
Total Exchange Capacity, CL- form, wet, volumetric
1.4 eq/l min.
Water Retention inside of structure, CL- form: 50-60%
Moisture content %: 5% max.
Particle Size Range: 0.4mm-1.2mm¡Ý95%
Swelling (FB-CL) : 20%
Shipping Weight (approx.): 650-710 g/l
Specific Gravity, moist CL- Form: 1.03-1.06
PH Range, Stability: 0 - 14.
201x7 is a high capacity, shock resistant, gelular,Type I ,strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, uniform, spherical beads. 201x7 is intended for use in all type of deionization systems and chemical processing applications..
Typical physical & Chemical characteristics
Polymer Matrix Structure: Styrene Crosslinked with DVB
Physical Form and Appearance: Clear spherical beads
Whole Bead Count: 95% min.
Functional Groups: R-N(CH3)3+
Ionic Form ,as shipped: CL
Total Exchange Capacity, CL- form, wet, volumetric
1.30 meq/l min.
Moisture Retention, CL- form: 45-52%
Particle Size Range: 0.4-0.8mm
Swelling CL-¡ú OH-: 18-20%
Shipping Weight (approx.): 670-720 g/l
Specific Gravity, moist CL- Form: 1.09
PH Range, Stability: 0 - 14.
001x7 is a high purity premium grade ,high capacity, gelular, sulfonated, polystyrene cation resin supplied in the sodium or hydrogen form as moist, tough, uniform, spherical beads. 001x7 is intended for use in all water softening, dealkalization, deionization and chemical processing applications.
Typical physical & Chemical characteristics:
Polymer Matrix Structure: Styrene Crosslinked with DVB
Physical Form and Appearance: Clear spherical beads
Whole Bead Count: 97% min.
Functional Groups: R-SO3
Ionic Form ,as shipped: Na
Total Exchange Capacity, Na+ form, wet, volumetric: 1.8 meq/l min.
Moisture Retention, Na+ form : 48-52%
Particle Size Range: 0.3-1.20mm
Less than 0.3mm1.0 %max
Swelling Na+¡÷ H+: 10% max.
Ca2+¡÷Na+: 5% max.
Shipping Weight (approx.): 800 g/l
Specific Gravity, moist Na+ Form: 1.29
PH Range, Stability: 0 - 14.
We can supply any quantity & certified super high grade quality of hydrated lime in 25kg, 40kg & jumbo packaging for the 400kgs also with short timelines.
If you are seeking 86+, 90+ & 96+ (pharma grade), we can supply the same to you also. Our entire product lines are iso 9001 certified.
Serious buyers please contact immediately.
Assuring of our best services at all times.
1, Properties and usage
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. in water system ,it can prevent scale formation, particularly for calcium carbonate. in water, ATMP has good chemical stability and is hard to be hydrolyzed. At high concentration, it has good corrosion inhibition.
ATMP can be used in thermal power plant, recirculated cooling water of oil refinery, and recycle waterflood system of oilfield.. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent.
The solid state of ATMP is crystal powder, easily soluble in water, easy moisture absorption, particularly suitable for using in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent.
2, Specification:
ITEMS
Index
Appearance
Colorless or light yellow transparent liquid
Whitecrystal powder
Active content (asATMP) % ¡Ý
50.0
50.0
92.0
Phosphorous acid (as PO33- )%
5.0
3.5
--
Phosphoric acid (as PO43- )%
1.0
0.8
0.8
pH (1% Water Solution)
1.5-2.5
1.5-2.5
¡Ü2.0
Chloride (as CL- )%
3.5
2.0
2.0
Fe(as Fe3+) ppm ¡Ü
--
20.0
20.0
Density (20oC) g/cm3¡Ý
1.28
1.30.
3, Application range&using method:ATMP is usually used together with other organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The recommended dosage is 5-20mg/L. As corrosion inhibitor, The recommended dosage is 20-80mg/L.
4,Safety Protection:ATMP is Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Package and Storage:ATMP liquid: Normally In 30kg or 250kg net Plastic Drum;ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients request.Storage for ten months in room shady and dry place.
CAS :2809-21-4
Molecular Formula:C2H8O7P2
Molecular weight: 206.02
1, Properties
HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn etc. metal ions and form stable complex compound. It can dissolve the oxidized materials on these metals'surfaces. Under250OC HEDP shows excellent scale and corrosion inhibition ability. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects.
The solid of HEDP is high purity product, suitable for using in winter and freezing districts. it is quite suitable for using as cleaning agent in electronic fields and as additives in daily chemicals.
2, Specification:
ITEMS
Index
Appearance
Colorless or light yellow transparent liquid
White crystal powder
Active content (as HEDP) % ¡Ý
50.060.0
89.0
Phosphorous acid (as PO33-)%¡Ü
2.02.0
0.80
Phosphoric acid(asPO43- )% ¡Ü
0.80.8
0.50
Chloride (as Cl-)% ¡Ü
1.01.0
0.10
pH (1% solution) ¡Ü
22
2.0
Density(20OC)g/cm3 ¡Ý
1.341.40
¡ª¡ª
Fe ion ppm ¡Ü
10 10
5.0.
3,HEDP Application range&using method
HEDP is widely used in the in circulating cool water system of electric power, chemical industry, metallurgy, fertilizer, etc. and widely used as a scale and corrosion inhibitor of low-pressure boilers, field waterflood, oil pipeline.
In light&textile industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid.
4,Safety Protection:HEDP is Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Package and Storage:ATMP liquid: Normally In 30kg or 250kg net Plastic Drum;ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients request.Storage for ten months in room shady and dry place.
1, Properties
EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor. Its corrosion inhibition is 3~5 times better than that of inorganic polyphosphate. It is miscible with water, innocuous and none pollution to environment, has good chemical stability and temperature tolerance. It shows excellent scale inhibition ability under temperature 200oC. It can dissociate into 8 positive-negative ions, thus can chelate with many metal ions to form polymer reticulation complex, to destroy the normal crystallization of calcium scale. EDTMPS shows better antiscale effects to calcium sulfate and barium.
2, Specification:
Items
Index
Appearance
Clear yellow to umber transparent liquid
Active component (as EDTMPS)% ¡Ý
30.0
Organic phosphonic acid(asPO43- )% ¡Ý
10.0
Phosphorous acid (as PO33- )%¡Ü
5.0
Phosphoric acid (asPO43- )%¡Ü
1.0
pH (1% water solution)
9.5-10.5
Density (20oC) g/cm3¡Ý
1.25
Chloride (as Cl-)%¡Ü
3.0.
3,Application range&using method:EDTMPS can be used as corrosion inhibitor in circulating cool water system and boiler water. It is a chelating agent in non-cyanogen electroplating industry and a water-softening agent in printing & dyeing industry. When used alone, 2~10mg/L is preferred. When built with HPMA by ratio ETDMP:HPMA=1:3, it can be used for low pressure boiler. It can also be built with BTA, PAAS and zinc salt.Organic phosphonic acid
Package and Storage:Normally EDTMPS packed with 25kg net Plastic Drum, or packed as customer¡¯s required. Storage for ten months in room shady and dry place.
1, Properties:DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibiting and temperature tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate.Under situation of alkali environment and high temperature (above 210oC) DTPMPA has better scale and corrosion inhibition effect than other organophosphines.
2, Specification:
Items
Index
Appearance
Yello Brow or red brown viscous liquid
Active acid % ¡Ý
50.0
Phosphorous acid (as PO33-)% ¡Ü
3.0
Chloride (as Cl-)% ¡Ü
12-17
Density (20oC) g/cm3
1.35-1.45
pH (1% solution) ¡Ü
2.0
Fe ppm ¡Ü
35.
3,Application range&using method
DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially good in alkali circulating cool water system without additional pH regulation, It can also be used as scale and corrosion inhibitor in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used.
DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelement's carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics.
4.,Safety Protection:Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Package and Storage:Normally In 25kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent.
Appearance : Colorless or light yellow transparent liquid
Active acid % : 48.0-52.0
Chloride (as Cl-)% : 2.0(or1.0) min
pH value 1 solution : 2.0 max
Fe (as Fe3+) (ppm) : 20
Density 20¡æg/cm3 : 1.33 min
Colour Alpha (Hazen) : 40 max.
HEDP is an organ phosphoric acid corrosion inhibitor. It can chelate with FE, cu, and ZN ions to form stable chelating compounds. It can dissolve the oxidized materials on these metals surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250¡æ. HEDP has good chemical stability under high ph value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organ phosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects.
The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals.
Appearance: colorless or light yellow transparent liquid
Active content HEDP : 58.0-62.0
Phosphorous acid as po33-%: 2.0 max
Phosphoric acid aspo43- %: 0.8 max
Chloride (as cl-)%: 0.01 max
Ph 1 solution: 2 max
Density 20¡æg/cm3: 1.40
Fe ion ppm : 10 max
Colour alpha (hazen): 40 max.
2493 Water Treatment Chemicals Suppliers
Short on time? Let Water Treatment Chemicals sellers contact you.
