Abrasive Grade Brown Fused Alumina For Grinding

Commodity: Dicalcium phosphate Feed Grade Use DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix. Product Nature Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization. Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder. Specifications Appearance white and gray powder/granule Total P 18% min Calcium 21% min  F 0.18% max As 30 ppm max Pb 30 ppm max Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

Commodity: Ammonium bicarbonate Food grade Molecular formula:NH4HCO3 Molecule Weight: 79.05 H.S code: 2836994000 CAS: 1066-33-7 Product Physical Properties WHITE POWDER CRYSTAL, SPECIFIC GRAVITY IS 1.586, IT CANDISSOLVE IN WATER, BUT CANT DISSOLVE IN ALCOHOL AND ACETINE. Specifications: Appearance: white free-flowing crystalline powder without agglomeration Purity as Ammonium Bicarbonate ,% by weight 99.5 (minimum) Chloride (as Cl), % by weight 0.20(maximum) Sulphates (as SO4),% by weight 0.10(maximum) Iron (as Fe), % by weight 0.004(maximum) Nonvolatile matter, % by weight 0.10(maximum) Heavy metals (as Pb), ppm 2.50(maximum) Copper (as Cu), ppm 5.0(maximum) Arsenic (as As), ppm 0.6(maximum) Tarry matter To pass test Oil Content Less than 10 ppm Melamine Content NIL USAGE BAKING FOODS SUCH AS CRISP CAKE, BISCUIT ETC. IN ADDITION, ITALSO WIDELY USED IN CHEMICAL FIELD SUCH AS FLOUR BRIGHTENING AGENT,RARE EARTH DEEP PROCESSING, MEDICINE MIDBODY, PLASTICS PROCESSING,ELECTRONIC ELEMENT ETC. PACKING OUTSIDE IS WEAVE BAG OR PAPER BAG, INSIDE IS FOOD PLASTICSBAG, 25KG/BAG. THE PACKING ALSO CAN ACCORDING TO CONSUMERS REQUEST. STORAGE Stored in a cool, ventilated, dry place.

Monocalcium Phosphate (MCP) Feed grade Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG28611997 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Specifications Appearance white powder or granule Total P 22%min Ca 13-18% F 0.18% max As 10 ppm max Pb 10ppm max Moisture 4%max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place

Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 21% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity. Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. coarse particles MDCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product produced by micro-particles MDCP form, without any chemical binder. Specifications Appearance white powder or granule Phosphate  21% min Calcium     15% min Fluorine    0.18% max Arsenic    30ppm max Pb   30ppm max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.

Cmmdity: Aluminum Fluride (Aluminium fluride) ther name: Aluminum trifluride Frmula:AlF3 M.W.:83.98 Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released. Specificatin: grade chemical cmpsitin % Physical character F Al N2 Fe2342- P25 LI Bulk dity g/cm3 AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5 AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3 AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7 AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7 Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc. Brief Intrductin f the Prductin Technics In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water. Packaging packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.

High-speed copper plating of welding wire is brown brown liquid, which is used for non electrodeposition of high-speed copper plating film on iron to facilitate wire drawing process. It can make copper ions deposit orderly, make copper deposit compact, and have strong adhesion. At the same time, the complexing agent can also effectively complexe excessive iron ions in the tank solution, so that the tank solution remains stable. The deposition film is golden yellow and pink, which is loved by users. It can be used as immersion or continuous production line. The weight of copper film is 5-20g/m2

Commodity: Sodium Bisulfite Molecular Formula: NaHSO3 Molecular Weight: 104.06 Properties: White monoclinic crystalline powder with sulfur dioxide odor; relative density: 1.49; very easily soluble in water; can be decomposed when heated; slightly soluble in ethanol; aqueous solution is acidic; has strong reducing property; can be oxidized in the air or loose sulfur dioxide. Quality Standard: HG/T3492-80 Technical Indicator High-purity grade Acrylic grade Food grade Refined grade Industrial grade 1 NaHSO3 % 99.5 Insol. in water % 0.003, 0.005, 0.03, 0.04, 0.05 Chloride(Cl) % 0.003, 0.004 Iron(Fe) % 0.001 0.002 0.005 Heavy metal(Pb) 0.001 Arsenic(As) % 0.0001 Clarity test Qualified Use: It is used in the bleaching of cotton textiles; as reducing agent in dyes, paper-making, leather, chemical synthesis; in the manufacture of pharmaceutical intermediates, developer, food bleacher, antiseptic and anti-oxidants. Packing: In PP woven bag lined with PE bag; paper-plastic composite bag, and kraft paper bag etc. Net wt.: 25/50/1000 kgs/bag or upon clients' request.

Commodity: Calcium carbide Molecular formula:CaC2 Molecule Weight: 64.10 H.S code:28491000 CAS: 75-20-7 UN NO.1402 HAZARD CLASS: 4.3 Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide. Appearance: Grey, black solid, purple when its purity is more than 90%. Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm Package: Net in 100kg or 50kg new iron drums with nitrogen. Specification: GB10665-2004 Specification Superfine Grade First Grade Second Grade Gas yield(L/kg)L/kg 305 295-305 285-295 PH3 content in acetylene (PH3%) 0.06 0.08 0.08 H2S content in acetylene (H2S%) 0.1 0.1 0.1 Loading weight in 1 x 20fcl:22.5mt