Items index Appearance Colorless or light yellow transparent liquid White crystal powder Active content (HEDP)% 58.0-62.0 89.0 min Phosphorous acid (as PO33-)% 2.0 max 0.5 max Phosphoric acid (asPO43- )% 0.8 max 0.5 max Chloride (as Cl-)% 1.0 max 0. 1 max pH (1£¥ solution) 2 max 2 max Density (20¡æ)g/cm3 1.430 - 1.460 - Fe ion ppm 10 max 20 max. HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.
Cationic polyacrylamide APAM Cationic PAM, copolymerized by cationic monomer and acrylamide monomer, is a water ¡§Csoluble and linear organic polymer with high molecular weight. Application: As a flocculating agent, mainly used in industrial solid-liquid separation process, including settlement, to clarification, concentrate and sludge dewatering processes. The main applications: 1). Industry wastewater treatment: urban sewage treatment, food processing, petrochemical, metallurgical, miner dressing, dyeing, sugar. 2). Papermaking: dry strength agents, retention agents and filter aids, which can be greatly improved paper quality, save cost and improve the production capacity. 3). Oil field: anti-clayswelling, acidifing densifier. Use Method: Being used, PAM should be dissolved in solution of 0.1-0.2%, If not use the matching dissolved equipment and dosing system, a solution should be put in the diluted cans. Practice on machine via screw pump and adjust the amount according to the actual.
1) CAS: 87-90-1 2) Appearance: white powder/granular/tablet 3) Usage: water treatment for swimming pool 4) Pakg: 50kgs net in plastic drum Effective Cl (%) 90 MIN, 1% Solution PH 2.7-3.3, Moisture (%) 0.5 MAX, insoluble matter: 0.1%max Size: Granular 8-30mesh Tablet 200g Pakg: in woven bag lined with plastic film bag, 50kgs net in plastic drum 1X20Fcl=21MTS Application: Disinfectant and bactericide series are composed of trichloroisocyanuric acid or made from trichloro isocyanuric acid, with various specification including white powder, granule, flake, block, cake,globular, liquid and so on. They are the most widely-used and most useful ideal disinfectant and bactericide with large export volume at present domestic and overseas market. They can completely substitute for any other disinfectants and bactericides in terms of disinfectant& bactericidal effect and price. They are of high efficiency,safety, broad-spectrum and convenient to use, widely used in the treatment of industrial recirculating water, drinking water,wastewater, sewage and swimming pool, industrial bleaching, the disinfection and sterilization of public places, hospital, family, seeds,breeding, and wool anti-shrinking, etc. 50kgs net in plastic drum.
FC-40: Appearance: Brown Liquid Severe (Be): 44 Ferric Chloride %: Greater than 40% Fe2+ %: Less than 0.3% Free Acid % Less than 0.3% FC-37: Appearance: Brown Liquid Severe (Be): 40 Ferric Chloride %: Greater than 37% Fe2+ %: Less than 0.3% Free Acid % Less than 0.3%. PE drum.
Poly Ferric Sulfate (PFS) is a complex ferric material. The molecular formula is the [Fe2 (OH)n (SO4)3-N/2]m, n＞2; m=f (n). There are a lot of complex ferrous ion ([Fe2 (OH)3]3+, [Fe(H2O)6]3+, [Fe3(OH)3]6+) in its water solution. So it is a good coagulant which has strong flocculation and has a good coagulation. Its chemical structure is a solid network polymer which has a multinuclear complex ion. It can be easy to hydrolyze in water and can produce the highly efficient multinuclear hydroxyl complex positive ion. In the process of water treatment, Polymer ferrous sulfate has a good ability to neutralize surface electric charge of suspended substances, and linking suspended particle. PE drum.
Chemical: Aluminium Sulphate Ingredient: Al2O3: 17. Features: For fast removal of suspended matter in pool water. Appearance: Powder/ granule /tablet Size: 0.5kg(or 1lb),1kg(or 2lb),2kg(or 5lb),3kg,4kg(or 10lb),8kg and 10kg of Pillow Bags,Doy Packs,Gusseted Bags and etc. 0.5kg (or 1lb),1kg (or 2lb),2kg (or 5lb),3kg,4kg (or 10lb),8kg and 10kg of Pails, Jars, Jugs,Pots,Tubes,Drums and etc. 25kg or 50lb bags.
Used for products, acetic anhydride, vinyl acetate, acetic acid esters, acetic acid Acetic acid fiber and chlorine acetic acid, etc. It is an important raw material, Synthetic fiber adhesive, and dyes, Medicine, pesticide, also is a good organic solvents. It is widely used in plastic, Rubber glue, printing, etc. 25kg plastic packaging, 20 foot container with 18 tons, needs a tray.
We supply formic acid,Purity,90% or 85% CAS NO. 64-18-6 Colorless transparent liquid, Package, 25kgs plastic drum, Usage: pesticide, chemical, leather, textile and so on. we can accept T/T and L/C, and the goods can be delivered within 10 days after your order. Specification for formic acid 90% Acidity%--------------------------90.0% min Chlorides, as CL %---------------0.003 max Sulphates (as SO4)%---------------0.001 max Metals, as Fe %-------------------0.0004 max Non-volatiles %-------------------0.020 max Specification for formic acid 85% Color index platinum cobalt%----------------------10 max Purity%-------------------------------------------------85 min Sulphates (as SO4)%----------------------------------0.002 max Chlorides, as CL %------------------------------------0.005 max Iron as Fe %--------------------------------------------0.0005 max Ignition residue %-------------------------------------0.020 max. 25kgs plastic drum.
Item Standard AL2O3 (m/m):% 28-30 27~29 Water- insoluble(m/m):% 1.0 1.5 Ammonium Nitrogen:% 0.09 0.15 Density(20oC)/(g/cm3) 1.12 1.12 Ph Value(1% aqueous solution) 3.5~5.0 3.5~5.0 Basicity % 40~90 40~90 As(m/m):% 0.005 0.005 Pb(m/m):% 0.001 0.003 Cd(m/m):% 0.002 0.002 Hg(m/m):% 0.00001 0.0001 Cr6+ (m/m):% 0.0015 0.005. In two-layer bag with the interior in plastic and the exterior in woven. The weight of each bag is 25kg.
D201 is a high capacity, shock resistant, macroporous,Type I ,strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, tough, uniform, spherical beads. D201 has a high operating capacity, especially on high-FMA feedwaters, as well as a high reversible sorptive capacity for complex organic materials, such as the fulvic and humic acids which occur in many surface water supplies. It is recommended for use in waters with low silica loads. For high silica waters, a type 1 anion resin such as Pure D201 is recommended. Typical physical & Chemical characteristics: Polymer Matrix Structure: Styrene Crosslinked with DVB Physical Form and Appearance: Opaque beads Whole Bead Count: 95% min. Functional Groups: R-N(CH3)2(C2H4OH)+ Ionic Form ,as shipped: CL Total Exchange Capacity, CL- form, wet, volumetric 1.2 eq/l min. Moisture Retention, CL- form: 47-57% Particle Size Range: +1.2 mm
MB101 is a high quality resin mixture for direct purification of water. It is suitable for use in regenerable or non-regenerable cartridges and in large ion exchange units. Passage of water at recommended flow rates through the resin as supplied can achieve almost complete reduction of total dissolved solids. The residuals produce average conductivity values of about 0.1 µs cm-1 for a major portion of the service run which may be extended depending upon the final water quality acceptable. Equivalent volumes of ultra pure water may be obtained after regeneration but only if sufficient regenerant quantities are employed to achieve the percentage conversion levels equivalent to those of the "as supplied" resin. Generally acceptable capacity and quality is obtained economically at lower regeneration Typical physical & Chemical characteristics: Guaranteed Sales Specification Units OH - Form H + Form Polymer Matrix Structure - Gel PolyStyrene Crosslinked with DVB Anion Cation Functional Group - Quaternary Amine Sulfonic acid Volume ratio - 60% 40% Total Exchange Capacity, min. meq/l 1.30 1.9 Water Retention Capacity % 53-60 45-50 Particle Size Distribution - - - >1.25 mm max. % 5 5
D301 is a very high capacity, bead form, weak base, macroporous type, anion resin made by epoxy polyamine condensation. It is a spherical bead form resin(unlike other granular formulations) suitable for use in high flowrate applications. The exceptionally high operating capacity and regeneration efficiency of D301 make it ideal for applications where the maximum possible throughput and minimum chemical dose are required. Typical physical & Chemical characteristics: Polymer Matrix Structure: Styrene Crosslinked with DVB Physical Form and Appearance: yellow spherical beads Whole Bead Count: 95% min. Functional Groups: R-N(CH3)2 Tertiary Amine Ionic Form ,as shipped: Free Base Total Exchange Capacity, CL- form, wet, volumetric 1.4 eq/l min. Water Retention inside of structure, CL- form: 50-60% Moisture content %: 5% max. Particle Size Range: 0.4mm-1.2mm¡Ý95% Swelling (FB-CL) : 20% Shipping Weight (approx.): 650-710 g/l Specific Gravity, moist CL- Form: 1.03-1.06 PH Range, Stability: 0 - 14. 25L /bag,1000L /big bag with pallet.
201x7 is a high capacity, shock resistant, gelular,Type I ,strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, uniform, spherical beads. 201x7 is intended for use in all type of deionization systems and chemical processing applications.. Typical physical & Chemical characteristics Polymer Matrix Structure: Styrene Crosslinked with DVB Physical Form and Appearance: Clear spherical beads Whole Bead Count: 95% min. Functional Groups: R-N(CH3)3+ Ionic Form ,as shipped: CL Total Exchange Capacity, CL- form, wet, volumetric 1.30 meq/l min. Moisture Retention, CL- form: 45-52% Particle Size Range: 0.4-0.8mm Swelling CL-¡ú OH-: 18-20% Shipping Weight (approx.): 670-720 g/l Specific Gravity, moist CL- Form: 1.09 PH Range, Stability: 0 - 14. 25L /bag,1000L /big bag with pallet.
001x7 is a high purity premium grade ,high capacity, gelular, sulfonated, polystyrene cation resin supplied in the sodium or hydrogen form as moist, tough, uniform, spherical beads. 001x7 is intended for use in all water softening, dealkalization, deionization and chemical processing applications. Typical physical & Chemical characteristics: Polymer Matrix Structure: Styrene Crosslinked with DVB Physical Form and Appearance: Clear spherical beads Whole Bead Count: 97% min. Functional Groups: R-SO3 Ionic Form ,as shipped: Na Total Exchange Capacity, Na+ form, wet, volumetric: 1.8 meq/l min. Moisture Retention, Na+ form : 48-52% Particle Size Range: 0.3-1.20mm Less than 0.3mm1.0 %max Swelling Na+¡÷ H+: 10% max. Ca2+¡÷Na+: 5% max. Shipping Weight (approx.): 800 g/l Specific Gravity, moist Na+ Form: 1.29 PH Range, Stability: 0 - 14. 25L /bag,1000L /big bag with pallet.
Specification of Adsorbent coconut based Granular Activated Carbon Specification Units IRIPL Iodine Value (mg/g) ± 30 1000 Apparent Density(mg/m3) ± 25 560 CTC adsorption % ± 70 Hardness % 98.8 Ash % 4 PH -- 8-10 Alkaline Moisture % 4 Sieve Size -- 8x30 Specification of Coal base Granular Activated Carbon Specification Units IRIPL. Iodine Value (mg/g) 600 Apparent Density (g/L) ± 10 500 CTC adsorption % ± Hardness % 90 Ash % 15 PH -- Above 8 Sieve Size 4x8. 25 Kg's and 50 Kg's in HDPP Bags.
Size:F24-F80 Al2O3:95% Fe2O3:¡Ü0.5% SiO2:¡Ü1.5% TiO2:¡Ü3.0% Maginitic materials:¡Ü0.05% Size:F90-F150 Al2O3:94% Fe2O3:¡Ü0.5% SiO2:¡Ü1.5% TiO2:¡Ü3.0% Maginitic materials:¡Ü0.03% Size:F180-F240 Al2O3:93% Fe2O3:¡Ü0.5% SiO2:¡Ü1.5% TiO2:¡Ü3.5% Maginitic materials:¡Ü0.02% Size:1#-63# Al2O3:94.5%/92.5% Fe2O3:¡Ü0.5% SiO2:¡Ü1.8% TiO2:¡Ü4.0% Maginitic materials:-- Melting point:2050 Refractoriness:1850 Bulk Density:3.85g/cm3 Mohs hardness:9.00. 20kg bags/25kg bags/1000kg bags/50lbs.
Grain Size:0-1mm.1-3mm.3-5mm.5-8mm etc Al2O3:95% Fe2O3:0.5% SiO2:1.5% TiO2:3.0%. Melting point:2050 Refractoriness:1850 Bulk Density:3.85g/cm3 Mohs hardness:9.00. 20kg bags/25kg bags/50lbs on wood pallets or according to customer's requirement.
Alum - used in manufacturing of craft papers and for the water purification. Technical specification: Al2o3-16% Insoluble
We can supply any quantity & certified super high grade quality of hydrated lime in 25kg, 40kg & jumbo packaging for the 400kgs also with short timelines. If you are seeking 86+, 90+ & 96+ (pharma grade), we can supply the same to you also. Our entire product lines are iso 9001 certified. Serious buyers please contact immediately. Assuring of our best services at all times. 25kg, 40kg, 700kg
CAS: 6419-19-8 Molecular Formula: N(CH2PO3H2)3C Molecular weight: 299.05 1, Properties and usage ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. in water system ,it can prevent scale formation, particularly for calcium carbonate. in water, ATMP has good chemical stability and is hard to be hydrolyzed. At high concentration, it has good corrosion inhibition. ATMP can be used in thermal power plant, recirculated cooling water of oil refinery, and recycle waterflood system of oilfield.. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, easily soluble in water, easy moisture absorption, particularly suitable for using in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. 2, Specification: ITEMS Index Appearance Colorless or light yellow transparent liquid Whitecrystal powder Active content (asATMP) % ¡Ý 50.0 50.0 92.0 Phosphorous acid (as PO33- )% 5.0 3.5 -- Phosphoric acid (as PO43- )% 1.0 0.8 0.8 pH (1% Water Solution) 1.5-2.5 1.5-2.5 ¡Ü2.0 Chloride (as CL- )% 3.5 2.0 2.0 Fe(as Fe3+) ppm ¡Ü -- 20.0 20.0 Density (20oC) g/cm3¡Ý 1.28 1.30. 3, Application range&using method:ATMP is usually used together with other organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The recommended dosage is 5-20mg/L. As corrosion inhibitor, The recommended dosage is 20-80mg/L. 4,Safety Protection:ATMP is Acidity, Avoid contact with eye and skin, once contacted, flush with water. Package and Storage:ATMP liquid: Normally In 30kg or 250kg net Plastic Drum;ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients request.Storage for ten months in room shady and dry place.
