Features It is dismountable and its movement can be pulled out easily for repair and exchange without taking the meter from pipe. (The recorder can be replaced on condition that water is available) The recorder is sealed up so that readings are over clear. Measuring devices are general purpose and can reduce alternate parts. Its parts are connected magnetically and work numbly and reliably because of slight obstruction. The pressure loss is small. It is durable. Working Conditions Hot Water Temperature: 90 C Water Pressure: 1MPa P < 0.03MPa Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% Hot: Exclusive: + 3% Application Dismountable spiral hot water is for recording discharge, flowing through its pipe. It can not record the amount of polluted water end corrosive liquid (APS Marines & Logistics)
Description Type LXSG-15E-50E water meter for cold water is manufactured by using advanced technology, in which, the register device is combinated pointers and rolling counters which is convenient, clear and correct for reading as well as nice appearance. The register system is designed by means of magnetic-drive, which is hermitically-sealed and completely separates the register system & water. It however can not be influence even if in pure water condition as well as corrosion of indicating dial. These water meter have high accuracy of measurement, steady error curve of flow rate. The performance is more advanced than existing ISO standard. Working Conditions Water Temperature < 50 C Water Pressure < 1MPa P < 0.1MPa Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% Application This water meter is used for measurement of total quantity of water passing through the pipeline. It is available for water flowing in a single direction. (APS Marines & Logistics)
Description Product Standard: ISO 4064 Class B End Details: Flanges as per DIN:2533 RF (PN16) Drilled Features It is dismountable and it can be pulled out easily for repair. The recorder is sealed so that readings are clear. The pressure loss is small and it has big flow capacity. It can be installed vertically or horizontally. Working Conditions Pressure Rating: PN 1.6 (16 Bar) Hyd. Maximum Temperature: 45 C Working Pressure: 1.0 MPa Hyd. Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: +5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: +2% (APS Marines & Logistics)
ISW1598 STS Split Prepayment Brass Water Meter STS Split Prepayment Brass Water Meter ISW1598 series is a STS (Standard Transfer Specification) compliant, electronic valve controlled, water meter. With ISW1598 series you are assured of continuously good metrology and revenue protection at the same time. A handy remote keypad, as Customer Interface Unit (CIU), is offered to enter recharge tokens and information short codes. The CIU is installed inside customers house, when the meter is kept away from customers reach in locked-up boxes or premises. The communication between CIU and the water meter is LORA. The meter is available with AMR data transmission features Main Features I. Directive 2014/32/EU, OMIL R-49:2013(E)& EN14154 compliant II. Wet dial / dry dial register construction on request III. Switchable between prepayment and post-paid. IV. Pre-programmable low credit warning V. Recharge by inputting 20 digits TOKEN with keypad CIU VI. Brass / plastic meter body on request VII. Reading through LORA and the system of GPRS /3G. VIII. Non- return valve preventing back-flow VIIII.CIU supports to match with different water meters VV. Support the valve control, through the handheld device and the system remote send valve control command.
ISW1598 STS Split Prepayment Brass Water Meter STS Split Prepayment Brass Water Meter ISW1598 series is a STS (Standard Transfer Specification) compliant, electronic valve controlled, water meter. With ISW1598 series you are assured of continuously good metrology and revenue protection at the same time. A handy remote keypad, as Customer Interface Unit (CIU), is offered to enter recharge tokens and information short codes. The CIU is installed inside customerâ??s house, when the meter is kept away from customerâ??s reach in locked-up boxes or premises. The communication between CIU and the water meter is LORA. The meter is available with AMR data transmission features Main Features I. Directive 2014/32/EU, OMIL R-49:2013(E)& EN14154 compliant II. Wet dial / dry dial register construction on request III. Switchable between prepayment and post-paid. IV. Pre-programmable low credit warning V. Recharge by inputting 20 digits TOKEN with keypad CIU VI. Brass / plastic meter body on request VII. Reading through LORA and the system of GPRS /3G. VIII. Non- return valve preventing back-flow VIIII.CIU supports to match with different water meters VV. Support the valve control, through the handheld device and the system remote send valve control command.
Feeder of Raw meal includes steady flow feeder, mass flow meter, gas-solid injector and FB-DACS5000 control system. It has a great effect on improving the stability of kiln working conditions, improving the working time and clinker strength, saving energy and prolongs the service life of refractory materials. Accuracy: +/- 0.5% Weighing Range: 100-1200 m3/h
1.Dual SIM card(Failover mode) 2.Supports OpenVPN which rescue data security 3.Supports Mainstream cloud platform protocols(MQTT SSL, AWS IOT�¯�¼?Azure, Ali Cloud and Huawei Cloud) 4.Various I/O ports(4AI,2DI and 2DO ) 5.Quick access to cloud platform with RS485 master and support Modbus to convert MQTT 6.Automatically monitor the status of LAN port (disconnect alarm) to realize real-time monitoring of the network.
Walsn Coriolis Mass Flowmeter Product Features 1) Highly sensitive trapezoidal shape 2) Closed loop controller on ASIC for improved response time and 2-phase flow performance 3) Dynamically balanced tubes for enhanced accuracy Pressure and dual temperature compensation Main Process Fluids Coriolis mass flowmeters are ideal for oils, gases/vapors and two-phase flows. Typical Applications 1) Density Measurement & Control 2) Chemical Injection 3) Reactor feed 4) Mass balance control
GMF200-W ultrasonic water meter is designed for water metering settlement and production of a high performance products, with the remarkable features of low power consumption, wide measuring range ratio, stable and reliable measurement .Each component reaches IP68 protection class, to ensure long term operation though water in the inside meter.
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss. The main unit can be installed in the wall, instrument box, and distribution box with a protection level of IP67. The external clip sensor is installed on the surface of the pipe and selects different sensors. The applicable diameter is DN15~DN6000.
Products: 1. MULTI JET WATER METER : DN 15, DRY DIAL, CLASS B 2. MULTI JET WATER METER : DN 20, DRY DIAL, CLASS B 3. MULTI JET WATER METER : DN 25, DRY DIAL, CLASS B Accuracy : Class B Application: Cold and Hot Water Type: Dry Dial Construction Material of Meter Body: NYLON 66 Working Pressure: 16 BAR OR above Flow Standard: As per latest version of Q3 Accessories: Set of Connectors(4 pcs) and Inlet Strainer Design Standard: ISO4064
We are TRUIN robot manucfacture from China, supply industrial robot including welding robot ,handling robot and Scara robot. Payload includes: 3 kg, 10kg, 20kg, 30kg, 50kg, 60kg, 165lg, 210kg, etc.
NAGMAN Instruments & Electronics Private Ltd. Chennai, INDIA. COMPANY PROFILE & PRODUCTS INTRO Nagman is an ISO 9001:2015 Certified Instrumentation Company involved in the Manufacture of Temperature, Pressure & Signal Calibration Instruments & Systems since 1972. Our Products are exported to over 100+ Countries worldwide. Nagman had developed & introduced several Innovative & Novel Import Substitute Products including Advanced Microprocessor/Micro-Controller based Dry Block Temperature Calibrators, Micro Oil Baths, Black Body Sources etc. Several Models of our Temperature Calibrators are manufactured as perCE Norms. Select Models of our Temperature & Pressure Calibrators are DNV Certified. We are also a Member of the IMPA. In addition, Nagmans developments & introduction in the Pressure Range included Microprocessor based Precision Pressure Calibrators (upto 1000 bar), cost-effective range of Dead Weight Testers (Pneumatic & Hydraulic) (upto 1200 bar) and Comparators/Master Gauges (upto 1400 bar), Hand Pumps (OEM) - Pneumatic (upto 60 bar) & Hydraulic (upto 1000 bar). Nagman, expanding on their technical expertise on portables, developed Calibration Test Benches/Workstations- Primary & Secondary Standard Calibration Test Benches, Temperature Calibration Test Benches, Electrical & Electronics Calibration Test Benches, Multifunction/Multi-parameter Calibration Test Bench Workstations and Computer Aided Calibration Systems - comparable in design, performance, features and accuracies to reputed/established International brands. Have supplied more than 2500 Test Benches to major industries in India & Worldwide. Nagman offers its customers Complete & Comprehensive Calibration Lab Packages including Calibrators (Systems / Test Benches / Portables), integrating System Software, a wide range of Test & Measuring Instruments, Tools and Tackles etc. Nagman also offer Consultancy for Calibration Lab Setup & conducts Training Workshops on Calibration Management Techniques. Nagmans CUSTOMER BASE includes Power Stations (Thermal / Hydro & Nuclear); Oil & Gas; Petrochemicals & Refineries; Process Industries (Chemicals & Pharmaceutical, Breweries, Fertilizers, Cement, Glass, Sugar, Synthetics, Steel, Metallurgical); Heavy Engineering Industries; Marine (Defence, Merchant Ships)/Ship Building, Off-Shore Companies, Naval Dockyard; Aeronautical Industries; Educational Institutions; EPC Contractors / Turnkey Project Consultants and National Calibration Laboratories / Test Labs like IDEMI / STQC ERTL / ETDC / CSIR etc.
Micro Meter Carbon Steel Chrome Plated Specification Size (Inch.) Size MM Outer Box (Qty.) 1 25 100 2 50 60 3 75 40
0 integrated / split electromagnetic flowmeter using the latest advanced technology and intelligent measurement algorithm, not only can measure low-conductivity liquid, can also be measured acid, alkali, salt and other corrosive liquids. Widely used in chemical fiber, food, mining and metallurgy, environmental protection, steel, petroleum, pharmaceutical and other fields. The innoMag 300 electromagnetic flowmeter consists of an electromagnetic flow converter and an electromagnetic flow sensor that can be used to measure and record the volumetric flow of conductive fluids. Using the latest advanced technology and intelligent measurement algorithm, not only can measure low-conductivity liquid, can also measure acid, alkali, salt and other corrosive liquids.
Now, the market of Diesel industry oil oval gear flow meter of high quality is very hot. There exist about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as Briefcase Company to declare that they are manufactures of Diesel industry oil oval gear flow meter of high quality. This situation is worrying. The so-called manufactures do not have their own calibrator at all; leave alone the accuracy of Diesel industry oil oval gear flow meter of high quality. Facing this complicated situation, the chief engineer, Mr. Tu Jianwen, who worked as a senior engineer in Siemens in Germany, came to Shanghai from his hometown Cixi in 2008. He was determined to create the world-class Diesel industry oil oval gear flow meter of high quality and established Shanghai Cixi Instrument Co. Ltd by the name of his hometown. The Diesel industry oil oval gear flow meter of high quality were produced and developed by the technology of Siemens numerical control system. Once upon a time, China, the worlds factory, is always the synonym with the low quality. Especially, the Diesel industry oil oval gear flow meter of high quality which are used to control in automatic process are produced cumbersome and noisy and can not measure the sticky medium. Thus, whether the quality is stable has become users greatest concern. So, sometimes buying Diesel industry oil oval gear flow meter of high quality is like buying a lottery ticket. Whats more, the quality is left to chance and cannot be guaranteed.
Now, the market of 0.5-150ml/min Glue Micro Oval Gear Flow Meteris very hot. There exist about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as Briefcase Company to declare that they are manufactures of Diesel industry oil oval gear flow meter of high quality. This situation is worrying. The so-called manufactures do not have their own calibrator at all; leave alone the accuracy of Diesel industry oil oval gear flow meter of high quality. Facing this complicated situation, the chief engineer, Mr. Tu Jianwen, who worked as a senior engineer in Siemens in Germany, came to Shanghai from his hometown Cixi in 2008. He was determined to create the world-class 0.5-150ml/min Glue Micro Oval Gear Flow Meterand established Shanghai Cixi Instrument Co. Ltd by the name of his hometown. The 0.5-150ml/min Glue Micro Oval Gear Flow Meterwere produced and developed by the technology of Siemens numerical control system. Once upon a time, China, the worlds factory, is always the synonym with the low quality. Especially, the 0.5-150ml/min Glue Micro Oval Gear Flow Meterwhich are used to control in automatic process are produced cumbersome and noisy and can not measure the sticky medium. Thus, whether the quality is stable has become users greatest concern. So, sometimes buying 0.5-150ml/min Glue Micro Oval Gear Flow Meteris like buying a lottery ticket. Whats more, the quality is left to chance and cannot be guaranteed. That Shanghai Cixi Instrument Co. Ltd has introduced the technology from Siemens in Germany has greatly improved the quality of 0.5-150ml/min Glue Micro Oval Gear Flow Meterto the world leading level. To be frank, the accuracy of our products is double higher than the similar products in Japan. In 0.5-150ml/min Glue Micro Oval Gear Flow Metereven the little screw holes or the gears and the watch cases are all accomplished by the Siemenss technology of numerically controlled production center. Due to this, the production of 0.5-150ml/min Glue Micro Oval Gear Flow Metergets rid of the traditional manufacturing technique and will get landmark achievement. Our company cherish the slogan quality in Germany and the price in China to make world-class 0.5-150ml/min Glue Micro Oval Gear Flow Meterand to be the benchmarking enterprise in the automatic instrument industry.
Now, the market of 5 DN125 Low cost turbine flowmeter China supplier 4-20ma output digital water flow meter priceis very hot. There exist about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as Briefcase Company to declare that they are manufactures of Diesel industry oil oval gear flow meter of high quality. This situation is worrying. The so-called manufactures do not have their own calibrator at all; leave alone the accuracy of Diesel industry oil oval gear flow meter of high quality. Facing this complicated situation, the chief engineer, Mr. Tu Jianwen, who worked as a senior engineer in Siemens in Germany, came to Shanghai from his hometown Cixi in 2008. He was determined to create the world-class 5 DN125 Low cost turbine flowmeter China supplier 4-20ma output digital water flow meter priceand established Shanghai Cixi Instrument Co. Ltd by the name of his hometown. The 5 DN125 Low cost turbine flowmeter China supplier 4-20ma output digital water flow meter pricewere produced and developed by the technology of Siemens numerical control system. That Shanghai Cixi Instrument Co. Ltd has introduced the technology from Siemens in Germany has greatly improved the quality of 5 DN125 Low cost turbine flowmeter China supplier 4-20ma output digital water flow meter priceto the world leading level. To be frank, the accuracy of our products is double higher than the similar products in Japan. In 5 DN125 Low cost turbine flowmeter China supplier 4-20ma output digital water flow meter priceeven the little screw holes or the gears and the watch cases are all accomplished by the Siemenss technology of numerically controlled production center. Due to this, the production of 5 DN125 Low cost turbine flowmeter China supplier 4-20ma output digital water flow meter pricegets rid of the traditional manufacturing technique and will get landmark achievement. In the future the flow meter in our company will be produced to resist the high temp and pressure. Besides, we will try our best to keep pace with the world not only in the quality of our products but also in the level of resisting high temp and pressure.
Now, the market of Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Priceis very hot. There exist about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as Briefcase Company to declare that they are manufactures of Diesel industry oil oval gear flow meter of high quality. This situation is worrying. The so-called manufactures do not have their own calibrator at all; leave alone the accuracy of Diesel industry oil oval gear flow meter of high quality. Facing this complicated situation, the chief engineer, Mr. Tu Jianwen, who worked as a senior engineer in Siemens in Germany, came to Shanghai from his hometown Cixi in 2008. He was determined to create the world-class Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Priceand established Shanghai Cixi Instrument Co. Ltd by the name of his hometown. The Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Pricewere produced and developed by the technology of Siemens numerical control system. Once upon a time, China, the worlds factory, is always the synonym with the low quality. Especially, the Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Pricewhich are used to control in automatic process are produced cumbersome and noisy and can not measure the sticky medium. Thus, whether the quality is stable has become users greatest concern. So, sometimes buying Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Priceis like buying a lottery ticket. Whats more, the quality is left to chance and cannot be guaranteed. That Shanghai Cixi Instrument Co. Ltd has introduced the technology from Siemens in Germany has greatly improved the quality of Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Priceto the world leading level. To be frank, the accuracy of our products is double higher than the similar products in Japan.
Diesel fuel micro metalMicro Metal Rotameter Flowmeter rotameter flowmeter, test bench Diesel fuel micro metal rotameter flowmeter. Now, the market of Diesel fuel micro metal rotameter flowmeter is very hot. There exist about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as Briefcase Company to declare that they are manufactures of Diesel fuel micro metal rotameter flowmeter. This situation is worrying. The so-called manufactures do not have their own calibrator at all; leave alone the accuracy of Diesel fuel micro metal rotameter flowmeter. Facing this complicated situation, the chief engineer, Mr. Tu Jianwen, who worked as a senior engineer in Siemens in Germany, came to Shanghai from his hometown Cixi in 2008. He was determined to create the world-class Diesel fuel micro metal rotameter flowmeter and established Shanghai Cixi Instrument Co. Ltd by the name of his hometown. The Diesel fuel micro metal rotameter flowmeter were produced and developed by the technology of Siemens numerical control system. Once upon a time, China, the worlds factory, is always the synonym with the low quality. Especially, the Diesel fuel micro metal rotameter flowmeter, which are used to control in automatic process are produced cumbersome and noisy and can not measure the sticky medium. Thus, whether the quality is stable has become users greatest concern. So, sometimes buying Diesel fuel micro metal rotameter flowmeter is like buying a lottery ticket. Whats more, the quality is left to chance and cannot be guaranteed. In our company, we have the stock of Diesel fuel micro metal rotameter flowmeter of all calibers. From this, it is not hard to find that our company has sufficient funds and our products sale good. Nowadays, there hardly exist companies who own the ability to keep stock. But we dare and have the strength to do that. Shanghai Cixi Instrument Co. Ltd has obtained 2 national invention patents. From the purchasing of raw materials to the process of quality controlling, we carefully check every producing and precision machining part. Before the flow meter leaves the factory, we would test and calibrate them consistently. Every manufacturing process was installed and carried out strictly with the quality controlling system of USO9001. Our products own CE, SGS and other EU certificates. Our company cherish the slogan quality in Germany and the price in China to make world-class Diesel fuel micro metal rotameter flowmeter and to be the benchmarking enterprise in the automatic instrument industry.
