- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
Power (W): 240/480; Battery Voltage (V): 12/24 (Automatically identify); Nominal charging current (A): 20; Nominal dis-charging current (A): 20; USB output: 5V/2A; Charging mode: Sealed, Gel, Flooded; Solar Panel: Mono Crystalline Technology, Power (W): 200, Voltage (V): 30; Life span: 20 years; Solar charge controller integrates an LCD screen displaying PV/battery voltage, charge/discharge current, charge/discharge capacity, charging status, temperature, etc; High reliability: heat protection, overcharge and over-discharge protection, short circuit protection, open circuit protection, etc.; Various charging and discharging parameters can be flexibly adjusted, suitable for different types of batteries, helping to extend battery life; Highly effective and intelligent 3-stage PWM charge management; CE, KC certified can apply for other standards as requirements; Warranty: 1 year; OEM accepted;
Leapton LP158*158-M-72-H/MH 400 W.
Ngai Cau Company is proud of being the supplier of Solar Panel Support Frames which have the designs suitable for each project and it is ensured with quality. The frames are made of different shape steels such as: pipe, tube and V-shape steels to ensure the lightness, the feasibility of installation and the durability of structures for any terrain. The products are being galvanized following ASTM- A123 Standard; it can be used up to 30 years.
400W Photovoltaic panel Clean energy, clean electricity Photovoltaic panels can store energy during the day. It can be charged at night to meet electricity needs. power 400W Operating voltage 32.6V Open-circuit voltage 37.7V Working current 13.2A Short-circuit current13.9A Battery piece 182 single crystal Single chip size 182*91mm External dimension 1900*1135*35mm
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
Solar street light: - solar panel 5V/45-200W - SMD CREE chip led -170-210lm/wat, 50.000hours - LiFEpo4 battery - Guarantee 5 years.
