Capacity: 0.7L/1L; Heat retention after 6h >= 78 C; Body: Stainless steel material, customized patterns and colors; Lid: PP Plastic material, just press the button to get water; Bottom: PP Plastic material, skid resistance, easy to disassemble; Mouth: Nice and even water flow, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Gasket: Silicone material, resist leakage; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1L/2L/5L; Heat retention after 6h >= 78 C; Body: Stainless steel/Steel material, customized patterns and colors; Lid: Polypropylene material, lever pump type; Bottom: Polypropylene material, skid resistance, easy to disassemble; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat preservation; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1L/2L/2,5L; Body: Stainless steel material, customized patterns and colors; Lid: Polypropylene material, push button type; Bottom: Polypropylene material, skid resistance, easy to disassemble; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat preservation; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1L/1,3L/1,6L; Heat retention after 6h >= 78 C; Body: Stainless steel material, customized patterns; Lid: Polypropylene material, loosen to get water without disassembling; Bottom: Skid resistance, easy to disassemble; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat preservation; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1L/1,3L/1,6L; Heat retention after 6h >= 78 C; Body: Stainless steel material, customized patterns and colors; Lid: Polypropylene material, just press the button to get water; Bottom: Polypropylene material, skid resistance, easy to disassemble; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat preservation; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Stainless steel products such as stainless steel profile bars (round, hexagonal, square, flat bar) grade 304/304l, 316/316l/ 316ti, 410, 420, 431, stainless steel sheets grade 304 (no.4, no.8, hairline, vibration, pvd, etched, embossed), stainless steel spring strips & wires, wire mesh (woven/ crimped/ welded/), tig rods & mig wires, and pure zinc wires..
Steel, Aluminium Product Like Aluminium Foil, Aluminium Wire, Aluminium Wire Rod, Scaffolding Products, Chemicals, Rubber, Mines Products, Galvanized Steel Wire, Galvanized Steel Coils, Steel Pipe, Steel Plates, Galvanized Steel Sheets, Steel Strand, Steel Strips, Steel Tubes, Steel Angles, Steel Bar, Stainless Steel Coils, Stainless Steel Pipes, Stainless Steel Sheets, Stainless Steel Strips, Stainless Steel Wire, Steel Tie Rod, Aluminium Ingots, Aluminium Strips, Aluminium Tape.
Color coated steel strip Color coated steel strip acc. To jis g3312 cgcc, soft quality. No. Color thickness widthness 1. Beige/yellow light cream 0.33mm x 99.5mm 2. Beige/yellow light cream 0.33mm x 124mm 3. Yellow light cream/beige 0.55mm x 50mm 4. Light blue/grey & yellow light cream/beige 0.55mm x 60mm 5. Light blue/grey & yellow light cream/beige 0.55mm x 124mm 6. Light blue/grey & yellow light cream/beige 0.65mm x 60mm 7. Light blue/grey & yellow light cream/beige 0.65mmx 124mm 8. Light blue/grey & yellow light cream/beige 0.75mmx 124mm Zinc coating: 100g/sqm - 140g/sqm Pe color coating: 18 microns for top side, and 13 microns for back side. The quantity is around 20mt-30mt for each item and the total quantity is around 300mt for each order Shipment date: within 35 days after l/c receipt. Payment by an l/c at sight Please feel free to reply us immediately
1. PRODUCT OVERVIEW VHR steel strip-seal joint made by Vinh Hung Investment and Production Co., Ltd (Vinh Hung IP) comprises of two steel rails with anchor bars connected to embedded bars in the pier cap of headwall of abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrink mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joint identified by the cross section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2. PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movements if any. Simple in design and installation, high load capacity and durability. Designed suitably for flush curb and central reverse. Totally water-tight. To ensure the long-lasting durability, VHR steel strip expansion joints are protected from corrosion with methods such as: 2-component epoxy coating, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al â?? Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards. MATERIAL PARAMETERS 1. PROPERTIES OF METAL ELEMENTS ITEMS Tensile strength, min Yield strength, min Elongation, min NO. 1 2 3 REQUIREMENTS 450 345 23 UNIT MPa MPa % STANDARD ASTM A709M PROPERTIES OF RUBBER SEAL UNIT REQUIREMENTS Point Mpa 1 2 3 4 5 Hardness Tensile strength, min Ozone resistance, content of ozone in the air 100pphm, 20% deformed at 40o C x 70h Elongation at break, min Hot air aging test in 70 hours at 100o C Tensile strength change, max Elongation change, max Hardness change 65 ± 5 7 No crack 250 - 20 - 40 0 - 15 STANDARD ASTM D2240 ASTM D412 ASTM D1149 ASTM D412 ASTM D573 ASTM D573 ASTM D573 ASTM D573 Installation of joints is critical to ensure the lifespan of the expansion joint and smooth traffic. Careful preparation of machinery, equipment, and highly specialized human resources is required for the installation of high quality expansion joints. The installation method shall be strictly followed to guarantee the actual performance of the product in service. 1. After finishing pavement, cut and clean he trend, adjust embedded bars, laym reinforcement bars on site 2 . Fix the deformed bars, install the fabricated joints, add distribution bars, anchoring bars to embedded bars. 3. Cure concrete, install rubber seal, allow traffic when concrete 4. Install formworks and pour non-shrink mortar or high-strength concrete to transition section, check the leveling of surface.
Most Common Size Table Size(mm) : 5.5 - 22 Coil weight (tons) : Up to 2.5 Standard : AISI ( SAE 1005 - 1013 )
Sea moss, coffee wood dog chew, nata de coco, coconut, dried sugarcane, joss powder, rattan, fish scales, anchovy, desiccated coconut, dried soft mango,....
Capacity: 0.36L/0.5L; Heat retention after 6h >= 78 �°C; Body: Double-walled 304 & 201 stainless steel for heat preservation, customized patterns and colors; Lid: 304 stainless steel material, just twist the lid to get water, temperature display (optional); Tea strainer: 304 stainless steel material, removable; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Product Name: Fishing Net Nylon Monofilament Place of Origin: Viet Nam Thickness: 10MD-800MD Mesh Size: 2 inch Full Mesh, 25 mm Half Mesh and As your requirement Depth: 10MD-800MD Length: As your requirement Selvage: Single, Double and Thick Selvage Color: Green, Yellow, White, Blue Material: Pa6 Knot: Double Function: Fishing and protection
Color: Natural. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles.
Stainless steel Export standard packing
Sus 304, 321, 301, 316, 430, 420j, 409, 439, 253ma, 347, ..Stainless steel coil/strips/plate/sheet/bar/pipe/tube/wire/.. Export
Reinforced Steel - Steel #10 - #22 Construction steel quality standards + Vietnamese standard: TCVN 1651-2:2018 + Japanese standard: JIS G 3112:2010 + American standard: ASTM A615/A615M-18e1 + British Standard: BS 4449:200+A3:2019 Construction Steel Export: Rebar steel, rebar H shaped steel U shaped steel V-shaped steel Galvanized welded pipe Black welded round steel tube Square steel tube, rectangular tube steel - box steel
Capacity: 0.4L/0.45L/0.6L; Heat retention after 6h >= 78 �°C; Body: Double wall 201 & 304 stainless steel for heat preservation, customized patterns and colors; Lid: 304 stainless steel material, just twist the lid to get water; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Power: 1500W; Capacity: 1.7L; Body: Double wall insulated design with 304 stainless steel interior plus a PP exterior for better heat retention rate, customized patterns and colors; Handle: PP Plastic material, stay-cool, integrated with lid release button; Base: PP material, 360-degree swivel; Cord-free pouring; Auto shut-off feature and boil-dry protection technology; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
ROLL STEEL 6 - 8 Round, smooth Manufactured according to domestic and international standards, some countries such as: USA (ASTM A615), Japan (JIS), Vietnam (TCVN 1651-2008)
