Product overview It is a mixture of polymer and surface active agent. This agent is a high-efficiency deposit control agent and repulping auxiliary agent that can be used directly on paper, paperboard and pulping systems, so as to control various deposits. Regardless of whether the sediment is derived from resin, broken paper or secondary fibers, it is an excellent cleaning agent. This product is suitable for neutral, acidic, and alkaline systems. It can prevent the resin, viscose, paint stickies and other wet hydrophobic pollutants from being accumulated in the paper and pulp machine felts, thereby making the felts clearer, the paper more efficiently, and the service life of the felts longer. Technical specifications �· Appearance: Light yellow liquid �· Density: 0.88-0.95 g/cm3 �· pH value (10% of water solution): 6-10 �· Solubility: Completely soluble in water, but insoluble in most organic solvents Performance characteristics 1. Improve the operating stability of the squeezing section 2. Prevent the hydrophobic pollutants such as resin and viscose being accumulated on the paper machine felt 3. It can keep the uniformity of the air permeability of the blanket for a long time, and makes the blanket's service life longer 4. Improve product quality and reduce unplanned shutdown time to clean blankets 5. It can frequently utilize secondary fibers and enhance economic benefits. Usage tips The amount can be varied from the paper types. The recommended dosage is 4-10 ml/min/m of fabric or roll width. The low-pressure spray water can be used to spray the forming net and coarse calico paper surface. Packing and storage This product is packed in plastic buckets, 200kg or 1000kg of per plastic buckets. This product shall be stored in a shaded, cool and dry condition at room temperature, shelf life: 6 months. This product is not dangerous.
Product overview WS-4089 is a kind of cationic polymer of polyamide & epichlorohydrin. It can be retentioned via effectively being attracted by pulps with negative charges at fast speed. The thermosetting chemical reaction will be resulted in at the dry section of dryer. The high wet strength of paper is from the stable chemical binding Technical specifications �· Appearance: Light yellow transparent liquid �· Ionic type: Cation �· Solids content: 12.5 �±0.5% �· pH: 3-5 �· Viscosity(25�ºC): â?¤ 100 mPa.s Performance characteristics WS-4089 is easily absorbed by fibers and can be gelatinized at medium or alkaline conditions. It is widely used in papers that need higher wet strength, such as tissues paper, decoration base paper, coated paper, map paper, food package paper, fruit bag paper, medical paper. Usage tips 1. Dosage: 5 kg to 30 kg for each mt of absolute dry pulp (or as per paper sheet situation) 2. It can be used in paper making afte adding into head box continuously via meter pump 3. It performs best at neutral and alkaline conditions. Packing and storage The package can be 200 Liters, 1000 Liters drum or as per clients' requests. It should be stored in cold place. The shelf life time is around 6 months.
Product overview 1. This product is mainly made of epoxy copolymerization of several fatty alcohols. 2. The basic properties of the foaming system are not affected due to its strong anti-foaming and anti-foaming effect. 3. Good heat resistance, stable chemical properties, no corrosion, no toxic, no adverse side effects. Technical specifications �· Appearance: Transparent liquid or light yellow liquid �· Viscosity (25�ºC) : 100 ~ 800 mPa.s �· Solids content: 100% Performance characteristics The white water in the wet end of papermaking, and the medium temperature white water system is more effective. Usage tips The antifoaming agent has excellent foam elimination and inhibition performance, and can be added to product after foam generation or as foam inhibition components. The additive amount of defoaming agent can be 10~100ppm. The optimal additive amount is determined by customers through test according to specific condition Defoaming agent product can be used directly or after dilution. If the product can be fully stirred and dispersed in foaming system, and can be directly added without dilution. If it needs to be diluted, it can't be directly diluted with water, otherwise the layering, demulsification, etc. Easily occur, thus influencing the product quality. For consequences generated due to direct dilution with water or process of use of the product in other incorret methods, our company doesn't undertake the responsibilities Packing and storage This product is packed in 25kg, 50kg or 200kg plastic drums. If you have special requirements, you can negotiate and customize. This product is suitable for storage at 0~30, and do not place it near a heat source or expose it to sunlight. Do not add acid, alkali, salt and other substances to this product. Seal the container when not in use. If there is stratification after long-term storage, stir it evenly. Generally, the effect will not be affected. According to general chemical storage methods. Ensure that it is sealed after use. Under the recommended storage temperature and unopened packaging conditions, the shelf life is 12 months from the date of production.
Product overview: With the rapid development of China's economy, it has been the trend to change the sizing process of traditional box board paper and corrugated board from the combination method of traditional internal sizing and surface sizing into complete surface sizing. Our company has developed new AKD modified surface sizing agent SA2600 through concentrated development for many years. The product is aggregated by various cation materials through special process and added the cross-linking resin synergist. The product can greatly boost the sizing effect, reduce the AKD hydrolysis and improve paper moisture regaining. The product not only can provide excellent high water-resistance performance, but also can boost the surface strength of paper. The product is used in the box board paper and high-strength corrugated paper produced from waste carton. Technical specifications Appearance: Milky white liquid Solids content: 25 �±1% pH value: 2-4 Viscosity: â?¤ 50 mPa.s (25 oC) Ionic type: Cation Solubility: Soluble in water. Performance characteristics 1. It owns excellent water resistance performance and thermal water resistance performance. 2. It can shorten the curing time, and isn't easy to regain moisture. 3. The consumption of internal sizing agent is reduced to decrease production cost. 4. It can significantly improve the interface strength of paper. 5. Compared with the Cation styrene acrylic surface sizing agent, the product reduces its dependence on aluminum sulfate. The less or no aluminum sulfate can be used to improve the paper folding resistance. 6. The product is good in mechanical stability, and few bubbles are generated in the operation process. 7. The product can be used separately or matches with styrene acrylic surface sizing agent. Usage tips Consumption: In case of separate use, 2-6 kg/ton paper is used. In case of matching with styrene acrylic surface sizing agent, the 1-3 kg/ton paper is used. The specific consumption needs to be adjusted according to the water absorption indicator requirements. During use, the pasted starch glue solution is cooled to below 65�°C, and the stock solution of the product is added to the starch glue solution tank, and is mixed evenly before sizing; Or the metering pump is used to add starch glue solution to pipeline for continuous adding. Starch glue solution can be added aluminum sulfate or not according to the actual conditions. The PH value of glue solution in glue solution tank is controlled at 3.5-4.5 upon the use of aluminum sulfate. In case of matching with styrene acrylic surface sizing agent, the aluminum sulfate of glue solution in sizing tank is controlled at 3.5-4. Packing and storage It is packaged in 200kg and 1000kg plastic bucket and is stored in cool place (5-30C) to avoid freezing and solarization. Storage life: 3 months
Product overview: CRM-8501 is an organic polymer compound of cation quaternary ammonium salt type. The advanced technology and raw materials are from developed countries. The characteristics are as below: The effective concentration is 10 times or 15 times higher than common retention acid liquid. It has better fluidity, easy & fast dissolution, no caking or granularity phenomenon. It has very good adaptability and can adapt to kinds of papers of kinds of pulps. Product function mechanism during the paper-making process 1. To neutralize the paper surface charge. The pulp and filler are of negative charges and the charges can be neutralized and decreased by adding into CRM-8501so as to form micro-floc when the potential towards zero. 2. To be inlaying effect. The electrostatic of positive charge on CRM-8501 surface can attract pulps and fillers whose surface is of negative charges. 3. To be bridging effect. Higher molecular weight and longer enough molecular chain will result in bridging between fines and fillers so as to form micro-floc. 4. The micro-floc of fines and fillers will decrease the porous structure blockages of wet paper layers and increase the permeability properties of papers. Appearance: Milky white liquid Solids content: 38�±1% pH value: 3-6 Viscosity : â?¤ 500 mPa.s Performance characteristics 1. To increase the retention rate of paper fines and fillers dramatically so as to decrease the pulp consuming qty. 2. To decrease the concentration of whitewater, wastage of fines&fillers and the whitewater pollution. 3. To increase the permeability properties of pulp and the wet strength of paper. To increase the production speed of paper-making machines so as to increase the production. 4. Without any pungent odor. And has better fluidity under lower temperature Usage tips Dosage: Around 0.3 kg to 0.8 kg per mt paper ( adjust as per different pulps and production processes) To add CRM-8501 evenly and slowly into dilution tank with ready water. And add additional water till requested qty ( the dilution concentration of CRM-8501 is usually 1-3). To stir the diluted concentration for around 20 to 30 minutes before entering into paper-making system via flow pump. Packing and storage The package is 200 Liters plastic drum or 1000 Liters IBC drums or as per clients' requests. It should be stored between -5C-30C. The shelf life time is 3 months. To wave the CRM-8501 before dilution and the diluted liquid can be stored 3 days at most.
Product overview: Stickies control agent can reduce the cohesiveness of resin composition in paper pulp and waste paper pulp by utilizing own positive electricity to fix them on pulp, thus preventing the pollution of net, coarse calico, dryer, etc. due to resin. In the meanwhile, it can reduce the shutdown and yield loss caused due to cleaning deposit. Technical specifications �· Appearance: Colorless to faint yellow liquid �· Solids content: 30 �±1% �· pH value: 2% water solution 3-7 �· Viscosity (25�°C): 500-3000 mpa.s �· Ionic type: Cation Performance characteristics 1. It can reduce the cohesiveness of resin composition in paper pulp and waste paper pulp by utilizing own positive electricity to fix them on pulp, thus preventing the pollution of net, coarse calico, dryer, etc. due to resin. 2. It can reduce the shutdown and yield loss caused due to cleaning deposit. 3. It can improve the paper machine vehicle speed and paper quality. 4. It is stable in acid, alkali and temperature. 5. It is soluble in water and generate a little bubble. Usage tips �· Adding place: It shall be added near the resin obstacles with good mixing. �· Adding method: The product is diluted for 10-20 times with clean water, with even mixing. �· Additive amount: 0.2-0.8 kg/ton slurry. Packing and storage �· It is packaged in 200kg or 1000kg plastic barrel, or packaged according to the users' requirements. It shall be stored in cool place (storage temperature at 0-30), with guarantee period: 6 months.
Product overview: Papermaking dry net cleaning agent is the efficient detergent developed and produced by our company to remove dirt and embossing on machine from various papermaking dry net. The product plays many roles in strong wetting, penetration, emulsification, dispersion, suspension, re-deposition resistance, anti-static electricity, etc. For the dry net obstacles which aren't rinsed easily with general cleaning product and the coarse calico with complex ingredients and long circular net dirt, the product can thoroughly remove them by recovering drainability, unchoking hole, improving breathability and running speed of paper machine, reducing energy consumption, improving paper quality and yield, and can save time, labor and water, facilitate operation, without coarse calico damage, equipment erosion, etc. The product can conduct the cleaning of whole forming net on machine according to the specific operation regulations to rapidly and effectively eliminate dirt and completely eradicate embossing; The product can also conduct partial cleaning: There is partial embossing on coarse cotton cloth, it can be rinsed accordingly. The position with embossing can be rinsed in targeted manner to spend little money. The product can obviously prolong the service life of coarse calico for 1-3 times, and reduce the production cost of paper factory, with significant economic benefit. Technical specifications Appearance: Colorless or faint yellow liquid pH value: 10-14 Viscosity(25â??ï¼?:â?¤ 30 mPa.s Solubility: Freely soluble in cold water Performance characteristics 1 The cleaning agent shall be sprayed evenly, and for the part with severe dirt, the consumption of cleaning agent shall be increased. 2 If there is resin adhesive and severe dirt on the surface of dry net, the steam can be added for heating to achieve better using effect. Usage tips Consumption: 0.3-0.5 kg/m2 coarse calico (absolutely dry). Washing device: For one high-level tank equipped with valve at bottom and one shower pipe, the effective spraying width shall be the same as the carpet width, the distance among bore diameters shall match with the spraying time as specified, and the dry net can also be directly sprayed with sprinkling can manually. Packing and storage It is packaged in 200kg or 1000kg plastic barrel and is stored in cool place. Guarantee period: 6 months.
Product overview 1. It is composed of polysiloxane, dispersing agent, stabilizer, etc.; 2. It is highly compatible with foaming medium, with rapid defoaming speed and excellent bubble elimination performance; 3. It is easy to disperse in water. Technical specifications Appearance: White to yellowish emulsion pH value: 6ï½?8 Effective ingredients: 99% Performance characteristics 1. Dyeing at normal temperature in textile slurry; 2. Industrial water treatment, coating and pesticide defoaming; 3. Elimination of other aqueous phase bubble with quick defoaming as required; 4. For the oilfield drilling fluid defoaming, the reversion rate of slurry is close to 100%. Usage tips The antifoaming agent has excellent foam elimination and inhibition performance, and can be added to product after foam generation or as foam inhibition components. The additive amount of defoaming agent can be 10~100ppm. The optimal additive amount is determined by customers through test according to specific condition. Defoaming agent product can be used directly or after dilution. If the product can be fully stirred and dispersed in foaming system, and can be directly added without dilution. If it needs to be diluted, it can't be directly diluted with water, otherwise the layering, demulsification, etc. easily occur, thus influencing the product quality. For consequences generated due to direct dilution with water or process of use of the product in other incorrect methods, our company doesn't undertake the responsibilities. Packing and storage �· The product is packaged with 25kg, 50kg, 120kg or 200kg plastic bucket. In case of special requirements, the bucket can be customized through consultation according to the special requirements. �· Its storage temperature shall be at 5~30â??. It shall not be placed near heat sources or insolated in the sunshine. The acid, alkali, salt, etc. shall not be added to product. The container shall be sealed in case of non-use to avoid being polluted by harmful bacteria. If it is layered after being placed for a long time, it shall be stirred evenly, and its using effect isn't influenced. The product would not freeze below 0 . In case of freezing, its using effect isn't influenced after melting and stirring. The guarantee period of product at the suggested storage temperature and without sealing, lasts for 12 months from the production date.
* Product overview: It is composed of polysiloxane, dispersing agent, stabilizer, etc.; It is highly compatible with foaming medium, with rapid defoaming speed and excellent bubble elimination performance and easy to disperse in water. * Technical specifications: Appearance: White to yellowish emulsion pH value: 6ï½?8 Effective ingredients: 99% * Performance characteristics Dyeing at normal temperature in textile slurry; Industrial water treatment, coating and pesticide defoaming; Elimination of other aqueous phase bubble with quick defoaming as required; For the oilfield drilling fluid defoaming, the reversion rate of slurry is close to 100%
Industrial Chemicals.
Chemicals in the sectors like papermaking, textile printing and dyeing, water treatment, petroleum, architecture and has achieved remarkable results under the guidance of the business philosophy of creating the best service and with the unremitting efforts of all staff..
Place of Origin: Ho Chi Minh City, Vietnam Main Raw Material: Solvent-based Usage: Road Marking Paint Application Method: Brush, Roller State: Liquid Coating Brand Name: JOLINE PRIMER Model Number: JOLINE PRIMER Drying time: max.10 minutes Density: 0.88 g/ml Solid content: min. 16% Colour: Colorless or light yellow Supply Ability: 500 Ton/Tons per Month Packaging Details: Tinned can 4L, Barrel 20kg Port: Ho Chi Minh, Hai Phong (Vietnam) JOLINE�®PRIMER is the solvent based coating, used as a primer of JOLINE�®, helps to increase the durability and adhesion of JOLINE�® Specifications: Colour Colorless or light yellow Solid content Min 16% Density 0.88 �± 0.05 g/ml Theoretical coverage 10-12 m2/kg/coat Drying time (23oC) Touch dry: 3-5 minutes, Hard dry: 10 minutes Re-coating time (23oC) Min 10 minutes Thinner/cleaner JOTHINNER -200 Tools: Brush, Roller. Clean tools after using. Application Stir well to the can bottom. Thinner should be only used in the case of exceptional circumstances (max 3% by the weight) Storage: Store in dry places. Keep away from sources of heat & ignition. Recommended systems: Primer 1 coat of JOLINE PRIMER Finish 1 �· 2 coats of JOLINE Precaution: Drying time depends on temperature, humidity and ventilation of application space. High temperature and good ventilation help the drying time to be more quickly.
NO TEST UNIT RESULT METHOD 1 Alcohol Strength 20oC vol 96.00 ASTM D4052-18a/OIML TABLE 2 Acidity as Acid Acetic wt 0.001 ASTM D1613-17 3 Impurities Aldehyde mg/L 6.39 AOAC 968.09/ AOAC 972.11 Ester mg/L Less than 1 Methanol mg/L 2.83 n- Propanol mg/L 2.45 Iso- Propanol mg/L Less than 1 n- Butanol mg/L Less than 1 Iso- Butanol mg/L Less than 1 n- Pentanol mg/L Less than 1 Iso- Pentanol mg/L Less than 1 Fusel Oil mg/L Less than 1
1 Alcohol Strength @20oC (%vol): 96.01 2 Acidity as Acid Acetic (%wt): 0.0012 3 Impurities - Aldehyde (mg/L): 8.34 - Ester (mg/L): Less than 1 - Methanol (mg/L) 19.90 - High alcohol (mg/L): 8.70 - Fusel Oil (mg/L) Less than 1
1 Alcohol Strength @20oC (%vol): 96.01 2 Acidity as Acid Acetic (%wt): 0.0012 3 Impurities - Aldehyde (mg/L): 8.34 - Ester (mg/L): Less than 1 - Methanol (mg/L) 19.90 - n- Propanol (mg/L): 8.70 - Iso- Propanol (mg/L): Less than 1 - n- Butanol (mg/L): Less than 1 - Iso- Butanol (mg/L): Less than 1 - n- Pentanol (mg/L): Less than 1 - Iso- Pentanol (mg/L): Less than 1 - Fusel Oil (mg/L): Less than 1
1 Alcohol Strength @20oC (%vol): 96.01 2 Acidity as Acid Acetic (%wt): 0.0012 3 Impurities - Aldehyde (mg/L): 8.34 - Ester (mg/L): Less than 1 - Methanol (mg/L) 19.90 - n- Propanol (mg/L): 8.70 - Iso- Propanol (mg/L): Less than 1 - n- Butanol (mg/L): Less than 1 - Iso- Butanol (mg/L): Less than 1 - n- Pentanol (mg/L): Less than 1 - Iso- Pentanol (mg/L): Less than 1 - Fusel Oil (mg/L): Less than 1
NO TEST UNIT RESULT METHOD 1 Alcohol Strength 20oC vol 96.11 ASTM D4052-18a/OIML TABLE 2 Acidity as Acid Acetic wt 0.0014 ASTM D1613-17 3 Impurities Aldehyde mg/L Less than 1 AOAC 968.09/ AOAC 972.11 Ester mg/L Less than 1 Methanol mg/L 5.80 n- Propanol mg/L 1.34 Iso- Propanol mg/L Less than 1 n- Butanol mg/L Less than 1 Iso- Butanol mg/L Less than 1 n- Pentanol mg/L Less than 1 Iso- Pentanol mg/L Less than 1 Fusel Oil mg/L Less than 1
1 Alcohol Strength @20oC (%vol): 96.01 2 Acidity as Acid Acetic (%wt): 0.0012 3 Impurities - Aldehyde (mg/L): 8.34 - Ester (mg/L): Less than 1 - Methanol (mg/L) 19.90 - High alcohol (mg/L): 8.70 - Fusel Oil (mg/L) Less than 1
- Downy conditioner belongs to the American brand P&G, with technology to help keep the fragrance long, up to 3 days. Downy softener is chosen by thousands of housewives at an affordable price, effectively softening clothes. Downy fabric softener with apricot flavor in 800ml bags, convenient and economical. - Package: 18bags/case - Brand: Downy (USA) - Origin: Vietnam
Native tapioca starch, modified tapioca starch (e1412, e1414, e1420, e1422), alpha / pregelatinized tapioca starch, natural rubber (svr 3l, svr cv60, svr 10/20, mixture).Exporter & supplier
