Glass beads for road marking paint for roads, parkings, airport run ways and a lot more
Aluminum coated glass bead is coated with a layer of aluminum on half sphere. It can highly enhance the reflective effect and be widely used for road signs, traffic safety goods, and reflective printing ink, or screen printing, etc. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.930.01Nd Specific Gravity 4.10.2 g/cm3 Color Silver grey Form Fine spheres Semi-coated with aluminum Size 75-90um 65-75um55-65um 40-55um 20-40um10-25um Brightness (Retro-Reflective Coefficient) Grade 1 50-100 Grade H 65-130
ND1.93 glass bead Composition BaO-SiO2-TiO2 GLASS Refractive Index 1.93±0.01 Specific Gravity 4.1±0.2 g/cm3 Color White Form: Fine spheres powder Size 75-90um;60-80um;50-70um 40-60um;25-40um;10-25um (can be provided by specific request) Roundness 95% Opacity 1% Brightness (Retro-Reflective Coefficient) 400-600 CPL for different type; The brightness of glass beads used in the reflective fabric meet the EN-471 standard.
Glass Bead with Refractive Index 1.93Nd 1.93nd glass bead is used for Exposed-Lens type retro-reflective articles, such as open-type reflective sheets, reflective fabric. reflective tape, reflective yarn and Encapsulated-Lens type retro-reflective articles, such as high intensity grade reflective sheet I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color White Form Fine spheres powder Size 10-100um(can be provided by specific request) Roundness 95% Opacity 1% Aluminum Coated Glass Bead with Refractive Index 1.93ND Aluminum coated glass bead is used for road signs , traffic safety goods and reflective printing ink, screen printing etc. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color Silver grey Form Fine spheres Semi-coated with aluminum Size 25-38um;30-45um; 40-55um; 50-75um
Glass Bead with Refractive Index 1.93Nd 1.93nd glass bead is used for Exposed-Lens type retro-reflective articles, such as open-type reflective sheets, reflective fabric. reflective tape, reflective yarn and Encapsulated-Lens type retro-reflective articles, such as high intensity grade reflective sheet I. Technical Data Composition TiO2-BaO-SiO2� � GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color White Form Fine spheres powder Size 10-100um(can be provided by specific request) Roundness 95% Opacity 1% Aluminum Coated Glass Bead with Refractive Index 1.93ND Aluminum coated glass bead is used for road signs , traffic safety goods and reflective printing ink, screen printing etc. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color Silver grey Form Fine spheres Semi-coated with aluminum Size 25-38um;30-45um; 40-55um; 50-75um
Glass Bead with Refractive Index 1.93Nd 1.93nd glass bead is used for Exposed-Lens type retro-reflective articles, such as open-type reflective sheets, reflective fabric. reflective tape, reflective yarn and Encapsulated-Lens type retro-reflective articles, such as high-intensity grade reflective sheet. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color White Form Fine spheres powder Size 10-100um(can be provided by specific request) Roundness 95% Opacity 1% Aluminum Coated Glass Bead with Refractive Index 1.93ND Aluminum coated glass bead is used for road signs , traffic safety goods and reflective printing ink, screen printing etc. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color Silver grey Form Fine spheres Semi-coated with aluminum Size 25-38um;30-45um; 40-55um; 50-75um
Glass Bead with Refractive Index 1.93Nd 1.93nd glass bead is used for Exposed-Lens type retro-reflective articles, such as open-type reflective sheets, reflective fabric. reflective tape, reflective yarn and Encapsulated-Lens type retro-reflective articles, such as high intensity grade reflective sheet. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color White Form Fine spheres powder Size 10-100um(can be provided by specific request) Roundness 95% Opacity 1% Aluminum Coated Glass Bead with Refractive Index 1.93ND Aluminum coated glass bead is used for road signs , traffic safety goods and reflective printing ink, screen printing etc. I. Technical Data Composition TiO2-BaO-SiO2 GLASS Refractive Index 1.93±0.01Nd Specific Gravity 4.1±0.2 g/cm3 Color Silver grey Form Fine spheres Semi-coated with aluminum Size 25-38um;30-45um; 40-55um; 50-75um
Hollow glass microspheres, made of Soda Lime Borosilicate Glass, are hollow spheres which grain size is 10-250microns, wall-thickness 1-2 microns, filled with inert air or gas. They are produced at the high temperature of 700-800 degrees Celsius through complicated chemical and physical transformation. Hollow glass microspheres are white and the specific gravity of them is about 0.25-0.60g/cc. They have much merit, such as lightweight, great buoyancy, hard, rigid, waterproof, innoxious, insulative, low heat conductivity, higher mechanical strength and excellent chemical stability,etc. Their surface was treated by the special way and the products are dispersed very easily in organic materials such as resin. � Hollow glass microspheres are widely used in composite materials such as FRP, man made marble and man made agate. They can decrease the weight of the composite materials and the composite materials have excellent performance of sound insulation and heat preservation, and they can improve the mechanical performance of the composite materials such as strengthened rigidity, enhanced anti-impact property, excellent anti-breaking property and re-processing function. Hollow glass microspheres are applied in a wide range of fields such as aviation, space flight, new bullet train, luxurious yacht, adiabatic dope, bowing balls, in which they play a distinctive role. Hollow glass microspheres are the excellent sensitized of emulsion explosive. They can improve the detonation property of emulsion explosive and prolong the shelf period of emulsion explosive. When used in the resin putty, hollow glass microspheres can increase the volume of resin putty, improve its polishing function. Packing: net 10kgs in Plastic film lined plastic weaving bags or strong cartons. Hollow glass microspheres series
1) Product Introduction With the advantages of smooth surface, even size, high hardness, wearable and stable, widely used as disperser, grinding media and filler materials in day, paint, ink and chemical industry. 2) Product Specification Main products specification for grinding according to following table: No. diameter(mm) corresponding sieve size 1 0.8-1.0 20-18 2 1.0-1.5 18-14 3 1.5-2.0 14-12 4 2.0-2.5 12-8 5 2.5-3.0 8-7 6 3.0-4.0 7-6 7 4.0-5.0 6-4 8 5.0-6.0 4-3 You can choose different size glass bead between 0.8mm-6mm according to different function. 3)Technical references A: Appearance: Clean and transparent, no visible bubbles and impurity. B: Specific gravity:2.4-2.6g/cm3 C: Hardness:6-7 D: Compressive strength:1200N 4)Package 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25�±0.2kg. 2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic wiven bag to prevent leak or damp. The net weight of each is 1000±8kg. 3.According to clients' requirement.
1) Product Introduction Glass beads for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be� blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity. 2) Product Specification Main products specification for sandblasting according to following table: No. Diameter(um) Corresponding sieve size 1 850-425 20-40 2 425-250 40-60 3 250-150 60-100 4 150-105 100-140 5 105-75 140-200 6 75-45 200-325� You can choose different size glass bead between 45um-850um according to different function. � High Strength Glass Beads (for Blasting) With compressed air as implicit power, this product is made by sprinkling beads under high speed and pressure on the surface of workpiece for peening and polishing. Other purposes of the products are as follows: 1.� Clear diverse moulds of impact forging, forging, glass, rubber and plastic, metal casting and extrusion. 2.� Eliminate tensile stress, increase fatigue life and enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc. 3.� Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering 4.� Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts 5. Clear electromotor and such parts as loop, electric brush and rotor of during heavy repair 6.� Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube. Be used for peening aggrandizement and polishing of textile machinery parts. � High Strength Glass Beads for blasting Type Mesh Grain Size �¼ m 30# 20-40 850-425 40# 30-40 600-425 60# 40-60 425-300 80# 60-100 300-150 100# 70-140 212-106 120# 100-140 150-106 150# 100-200 150-75 180# 140-200 106-75 220# 140-270 106-53 280# 200-325 75-45 3) Technical references Appearance: Clean and transparent, no visible bubbles and impurity. Density:2.4-2.6g/cm3 Hardness:6-7(Moh's) Spherical beads: 75% SiO2 content: 72% 4) Package 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm; the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25±0.2kg. 2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is paper-plastic compound bag to prevent leak or damp. The net weight of each is 25±0.2kg. 3.According to clients' requirement.
Glass beads for road marking 1.Improve the road marking line contrary reflection function. When driving at night, the lamp shines on the marking line with glass bead in it, the ray of lamp is reflected back parallely. So the driver can look at the road clearly and drive safely at night. 2. Products according to international standard include: jt/t 446-2001, english bs6008, korean, ks and american aashto etc. 3. You can choose different size glass bead between 50um-1180um according to different function. 25kg/bags, 40bags/pallet, using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp.The net weight of each bag is 25f+0.2kg.
Refractive Index 1.93 Color white and sliver grey white color is transparent glass bead, sliver grey is aluminum coated glass bead. Sliver grey color has higher brightness than white color if the beads size range is same. Density 4.2 g cm3 Opacity: 3% Roundness: 95% Usage: used for screen printing, jetting and other reflective material
Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
Factory supply weighted blanket glass beads filling glass beads Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity; 2, round elastic particles, impact resistance, can be recycled many times, less loss; 3, the spray wear is small, extend the service life of the nozzle; 4, the surface of the ball, will not damage the processing surface and precision size; 5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value; 6. Suitable for dry and wet sand blasting; 7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting; 8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment.
Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
Glass bead for sand blasting 1,Road making, airport road marking; 2,Fillers for various insulation and sound insulation products; 3,Enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc 4,provide brightness for medical mechanical instruments and automobile parts 5,Be used for reflective safety clothing to improve safety.
Reflective Glass Bead for Marking & Traffic Paint Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
