The product is mainly used to produce polycarboxylic acid superplasticizer products The polycarboxylic acid superplasticizer synthesized with it has higher water reduction rate, higher slump retention, good early strength, low alkali, low foam and low energy consumption. The third monomer is introduced: it has better molecular weight regulation function. The synthesized superplasticizer has uniform molecular weight distribution, good workability and low viscosity. The higher unsaturation ensures the higher eective content of the super chemical agent synthesized in the later stage, which is the most favorable guarantee for high water reduction rate and high slump retention.
Our coconut Diethanolamide is lowest in free amine and give a very good viscosity to your detergent
polystyrene densifier Mars series adopt hot-melt technology. The small polystyrene pieces cut by the crusher will then be heated to 190 degrees Fahrenheit which turns the polystyrene into a soft pliable material that can be densified into a denser form at a ratio of 90:1. INTCO Recycling Supply polystyrene foam densifier M-C300 for polystyrene foam recycling and Buy Back Foam Blocks. Applicable materials include EPS, EPP, PSP, XPS, PSP/food trays, and cups.
Solvent Yellow 114 is mainly used for dyeing and printing on Polyester, Nylon, Acetate polyester/wool blends. It can also be used for polyester fiber dyeing and printing ink, plastic, candles, coloring, and so on. It is one of the three primary colors in dyes.The performance of its coloring can not be replaced by other pigments and dyes. It is applied with high temperature and high pressure method, and room temperature dyeing,normal temperature carrier dyeing or printing, The product has better leveling, and it s light fastness accessible 6-7 level . It is dyeable monochrome, and with the disperse blue or disperse turquoise blue together to match the bright fruit green, grey, coffee-coloured, etc . It can also be used for dyeing of diacetate fiber, triacetate fiber, nylon fiber, acrylic fiber, etc..
Type:Yd1030 Film-forming temperature Ash content Particle diameter 80-120 Character:Good adhesion, dispersity and film formation Type:Yd1060 Film-forming temperature Ash conten Particle diameter 120 Character:Good adhesion, dispersibility and film forming;water resistance and flexibility are strong Type:Yd1090 Film-forming temperature Ash conten Particle diameter Character:Good adhesion, dispersibility and film forming;water resistance and flexibility are strong
Epoxies E-purge (epoxy powder for purging) Epoxy curing agent 87 Epoxy resin (for mfg powder coatings) $.66/lb. Waterborne epoxy dispersion -$.77/lb. Ortho creosol resin-$.88/lb. Ketimine curing agent $.90/lb. Epoxy resin (40% solids in mek) $.85/lb.
Emulsions-adhesives Polyvinylacetate Sbr Eva Many varieties of solids contents and viscosities.
Amines Adma 12 Jeffamine 900 Rapi-cure (see uv inhibitor under new items)
roduct Description: Sodium Hydroxide is a highly caustic inorganic compound. Typically found in flakes, pearls and granules that are soluble in ethanol , methanol and water. Also known as caustic soda used as a strong chemical base in the production of paper and pulp and detergents and cleaners. Applications: Pharmaceuticals & Medicine Detergents & Cleaners Paper & Pulp Fuel Cell Production Water Treatment Aluminum Ore Processing Food Processing Connection Chemical LP is a professional importer of Sodium Hydroxide/Caustic Soda. Connection Chemical has the capability to stock and sell Sodium Hydroxide/Caustic Soda from stocking locations nationwide. Connection Chemical is a supplier and distributor of Sodium Hydroxide or Caustic Soda. As a supplier of Sodium Hydroxide/Caustic Soda, Connection Chemical provides supply chain solutions to partners and customers in numerous industries. We work with competitive prices and reliable manufacturers of Sodium Hydroxide/Caustic Soda.
Adhesive glue is made of MDI , HDI, plasticizer, polyther, antistalin, oxygen absorbent etc one component environmental protection PU adhesive for paving applies to air permeability and compound running tracks and courts Environmental Protection PU Adhesive for Rubber Tiles Packaging: 200kg/drum galvanization iron drums Delivery Detail: 7days Primer for asphalt and concrete base MDI based No bad smell One component PU adhesive is used for rubber tiles, there's no stimulating odor during process
1.MDI/HDI one component polyurethane binder. 2.100% eco-friendly. no harm,no poison PU Adhesive is used to pave rubber flooring and make rubber tiles, such as athletic field, sports courts, children playground, walking way, park, etc. Suggested ratio of adhesive and SBR is 1:7, adhesive and EPDM is 1:5. With 20-30% air humidity, it needs 2 hours for curing; while it reaches 75%, construction is not recommended. Normal packing is 200kg/barrel, customized packing is also allowed. It applies to air permeability and compound running tracks and courts. It applies to make rubber tiles, which are used for paving kindergartens, excise yards and gyms.
Our,Sodium hydroxide is industrially produced as a 50 % solution by variations of the electrolytic chloralkali process. Chlorine gas is also produced in this process. Solid sodium hydroxide is obtained from this solution by the evaporation of water. Solid sodium hydroxide is most commonly sold as flakes, pearls, and or liquidprills, and Sodium hydroxide is produced (along with chlorine and hydrogen) via the chloralkali process. This involves the electrolysis of an aqueous solution of sodium chloride. The sodium hydroxide builds up at the cathode, where water is reduced to hydrogen gas and hydroxide ion: 2 Na+ + 2 H2O + 2 e H2 + 2 NaOH Sodium hydroxide is the principal strong base used in the chemical industry. In bulk it is most often handled as an aqueoussolution, since solutions are cheaper and easier to handle. Sodium hydroxide, a strong base, is responsible for most of these applications. Another strong base such as potassium hydroxide is likely to yield positive results as well. 56 % of sodium hydroxide produced is used by the chemical industry, with 25 % of the same total used by the paper industry. Sodium hydroxide is also used for the manufacture of sodium salts and detergents, for pH regulation, and for organic synthesis. It is used in the Bayer process of aluminium production.
Wholesale pricing and extensions offered 800 dmt packaged in 500kg and one ton bags
Application scope recommended: Bulk paint (in emulsion); ink; plastics; dyeing and final paint; paper coating, colorful wallpaper; white shoe-polishing agent; paint (dried by air), etc. Performance and characteristics: Usable in both water and oil systems, but poorer in dispersion than special types Technical index: Item No. Quality index Result Notes 1 Tio2 content(%) 92.5 min 2 Rutile content(%) 7 min 3Whiteness6 min 4Lighting power 100 min 5Dispersion(number haegeman) 6.0 min 6Oil adsorption(g/100g)22 max 7Volatile(105°c)(%)0.5 max 8Residue on sieve(%)0.02 max 9Water soluble substance(%)0.5 max 1Ph value of aqueous suspension6.5 - 8.5 Packaging: Page valve bag, 25kg / bag
Material is borosilicate glass and PP,the normal color is clear and amber.Suitable for HPLC and GC.Has wide application area,it's including food,consumer goods,pharmaceutical,environmental,medical,chemical materials,packing and etc testing. It's economic and convenient suitable for use in Shimadzu VP series, rack 16,Borosilicate glass,olyethylene,Starburst top feature for easy needle penetration,Cap to be packed separately from vials
Black, soft & uncured.
Titanium Dioxide Multipurpose rutile titanium dioxide pigment, it has average particle size distribution, good whiteness, good dispersion, high gloss, good hiding power and high weather resistance properties. It is widely used in coating, paints, ink, leather, rubber and ink production
Crude zinc oxide, with zn: 80-82% Pb: 0.01% Cd: 0.015% S: 1.2% Na: 1.8% K: 0.8% Mn: 0.018% Mg: 0.070% Fe: 0.90% Ca: 0.24% Al: 0.25% Cl: 1.0% Fl: 0.025% Bulk density: 3,000KG/m3
Product Description : Flakes or Pearls in 25-kilo bags Price of product ( USD price or FOB price) : Ask for quotation Product origin : China Key Specifications/Special Features : Used in Various Industries Minimum Order Size and Packgaing details : 1 20-foot container
Product Description : Flakes or Pearls in 25-kilo bags Price of product ( USD price or FOB price) : Ask for quotation Product origin : China Key Specifications/Special Features : Used in Various Industries Minimum Order Size and Packgaing details : 1 20-foot container
