Mono Coat Egg Shell Latex - interior is Latex Acrylic copolymer based Premium Latex - emulsion paint
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Paints Mono Coat Egg Shell Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Mono Coat Egg Shell Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Mono Coat Egg Shell Latex.
PROPERTIES
Colour : Full range - as per shade card
Finish : Egg Shell
Solids(Volume) : 52% and above
Specific Gravity : 1.27 +/- 0.1
Theoretical Coverage : 350 â?? 450 sq. ft. per gallon
DRYING TIME :â?? AT 25 �° T
Touch Dry : 2 hours
ACRYLIC TOP COAT
it is an acrylic resin based premium top coat for metals. It has exceptional color and gloss retention in a variety of climatic condition.
PROPERTIES
Colour : full range
Solids: 38 + 2 %
Theoretical Coverage 9 â??12 m2/Lit
Recommended (Dft) : 30 - 40 Microns/ per coat
Recommended (Wft) : 90-100 Microns/ per coat
DRYING TIME â?? AT 25 �°
Surface Dry: 5-10 mins
To Recoat: 3 â?? 4 hours
Vehicle type: Modified alkyd
Specific gravity: 1.15 �±0.05 (depends on color)
solvent based fire retardant paint, based on special resins and Chemicals. The dried film gives good resistance against fire and Protection to base substrate.
RECOMMENDED USES
As fire retardant topcoat paint on wood, steel and concrete surface. At recommended thickness it has excellent fire retardant properties.
ADVANTAGES
One component special resin based paint, easy to apply, excellent water, weather and U.V. resistance. Dry film has excellent fire retardant properties
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents.
PROPERTIES
Colour : black
Solids : 70 �± 2%
Specific gravity 1.40 at 25�° C
Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M)
DRYING TIME :â?? AT 25 �° T
To touch: 15 min
To Recoat: 2 hours
Max.overcoat interval: Not applicable
Vehicle type: bitumen â??coal tar
Flash Point: 35�° C.
Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
High quality alkyd enamel white for use on all wood, metal or masonry surfaces. This product is extremely durable with excellent flow and leveling characteristics.
PROPERTIES
Colour : Milky white
Solids : 55�±2 %
Theoretical Coverage: 10 â??12 m2/Lit
DRYING TIME : â?? AT 25�°
To handle: 4 â??6 hours
To Recoat: 8 - 12 hours
Vehicle type: Modified alkyd
Specific gravity: 1.10 �±0.02%(depends on color)
New Acrylic, Vynil, Waterbase paints, White and colors, Residential and contractors grade,
Name of product
V600 Interior Acrylic Waterbase paint White and light colors
Product origin : North America
Key Specifications/Special Features :
GENERALAcrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended to be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general.
Minimum Order Size : Full Container Loads
DENSITY (g/ml) 1.31 +/- 0.035 a 25°C
BRIGHTNESS 10 to 20 Glitter Units at 60 °
DRYING TIMETo the touch 30 minutes, at 25 ° C (77 ° F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate.
Quality From ISO 9000 paint manufacturer
V300 Interior Acrylic Latex Waterbase paint White and light colors
Product origin : North America
Key Specifications/Special Features :
General Acrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended To be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general.
Solids BY Weight (%)41% +/- 5%
Viscosity 95 a 105 KU @ 25C
Density (g/ml) 1.31 +/- 0.035 a 25C
Brightness 0 to 5 Glitter Units at 60
Drying Time To the touch 30 minutes, at 25 C (77 F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate
