Find Verified Construction Materials Suppliers, Manufacturers and Wholesalers

Polyurethane Coating is two component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion.

PROPERTIES
Colour : Full spectrum

Solids: 50 +/- 2 %

Theoretical Coverage 10 - 11 m2/lit

DRYING TIME : AT 25 C
To handle: 3 hours

To Recoat: 5 hours

Flash point: 27C

Specific gravity: 1.10 �±0.05

Pot life: 6 hours

Mixing ratio: 4 parts base "A" :1 part hardner "B"

Solvent: Polyurethane thinner.

High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.

A two pack high build epoxy Polyamide based under coat containing inert pigments. It is recommended as a final coat in an Epoxy system

CHARACTERISTICS
High build in single coat.
Excellent resistance to fresh and salt water
Abrasion resistance and flexible films.
Excellent inter-coat adhesion.
Resistant to solvents.
Resistance to mild acids.
USES
Coating for long term protection for structural steel, concrete surface and internal lining of edible oil tanks, and fuel tanks. Suitable for marine installations, power plants, fertilizers, hospitals, laboratories, etc.

Dirt is effortlessly removed from any floor surface, delivering twice the suction power of standard cord-free vacuums. Intelligently optimizes suction and run time, to deep clean everywhere. With fade-free battery power and a battery-saving trigger. And real-time reporting on the LCD screen to give you control of your clean. The Dynamic Load Sensor (DLS) system automatically changes the motor speed between carpets and hard floors. For deep cleaning across floor types. The Dyson V11 Torque Drive cord-free vacuum quickly transforms to a handheld for quick clean ups, spot cleaning and cleaning difficult places.

>=100 Gallons
US$ 8.00

Payments:This supplier also supports L/C,T/T,Western Union payments.

>=100 Gallons
US$11.50

Shipping:
Support Sea freight

Payments:This supplier also supports L/C,T/T,Western Union payments.

Quick Details :
Place of Origin:
United Arab Emirates

Usage:
Building Coating, Texture Paint for Exterior and Interior

State:
Liquid Coating

Main Raw Material:
Acrylic

Application Method:
Brush

Brand Name:
Regent Paints

Supply Ability
Supply Ability:
20000 Liter/Liters per Day

Packaging & Delivery
Packaging Details
1 ltr , 4 ltrs , 20 ltrs , 20 KG , 25 KG , 1000 ltrs
1 US Gallon, 5 US Gallon
Port
Jebel Ali
Lead Time :
1 week

A Signature Product defining your value and the feel on the walls of your hones and offices. The sheen, the durability, the coverages impart the most outrageous range to your access.

Velvet Acrylic Emulsion is an environmentally friendly acrylic emulsion based interior decorative coating designed for velvet effects and to simulate a prestigious architectural appearance to the surface. It offers excellent adhesion and an easy to clean coating.

Colour: Full range as per shade card

Finish: Pearlescent-Satin
Vehicle Type: Acrylic
Solids( volume) : 42 �± 2%
Specific gravity: 1.03 �± 0.05
Theoretical Coverage: 260 - 400 sq. ft. per gallon

Packaging & Shipping
Metal drums one US gallon, 5 US gallon, 20 litres, 20 kg, 25 kg and 1000 Litres Totes


Bulk Buying:

1 Totes = 264 Gallons
1 Barrel = 55 Gallons

Bulk Shipping:

We ship containers. And It will accommodate
1 container of 20 feet = 80 barrels
1 container of 20 feet = 18 totes

Matte Premium Latex at the best Performance of durability tests in any walls, woods and few metals as well. An adventurous Range to sustain the sheen level and coverage of solvent based products. Adding value to extra coverage, low voc, non yellowing, acrylic features, water dilution and more. A Regent Hi Performance and durable product.

Matte finish is an Acrylic copolymer based, washable interior/exterior emulsion paint with a smooth flat decorative finish. It offers excellent adhesion and recoat ability. It is with better hiding power and exceptional light and weather resistance.

USES
A Matte - gloss finish, acrylic resin emulsion formulated to protect and beautify interior surfaces. Excellent for masonary (concrete, cement block, cinder block), wall board, stone, brick, and wood. May also be used on properly primed steel.

HI GLOSS LATEX
Hi - Gloss Latex the Glamorous - interior is Latex Acrylic copolymer based Premium Latex-emulsion paint.

A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.

USES
Regent Paints Hi - Gloss Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Hi-Gloss Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Hi - Gloss Latex.

PROPERTIES
Colour : Full range - as per shade card

Finish : Hi-Gloss

Solids(Volume) : 52% and above

Specific Gravity : 1.27 +/- 0.1

Theoretical Coverage : 250 â?? 400 sq. ft. per gallon

DRYING TIME :â?? AT 25 �° T
Touch Dry : 2 hours

To Recoat : 4 hours

Vehicle Type : Acrylic Copolymer

GULF TEX
Gulf tex heavy texture is water borne acrylic heavily textured coating based on modified styrene emulsion with aggregates ( Mica chips), which provide special pattern on the wall, woods suited for the all climatic condition.

PROPERTIES
Colour : As per shade card

Finish : Texture finish

Consistency: Thixotropic

Solids: 65 % ± 3 %

Specific gravity: 1.70 ± 0.05

Theoretical Coverage 1 -2 m2/ltr

DRYING TIME : AT 25
To handle: 4 hours

To Recoat: overnight

Number of coats: 1

Application by: Roller for heavy tex or Hooper spray

WOOD STAIN
Interior alkyd oil based woods stain that protects and enhances the natural texture of fine wood.

PROPERTIES
Colour : As per cards of colour

Solids: 35%

Theoretical Coverage â??15m2/lt depends of surface

Viscosity : 80 sec ( Ford cup No.4)

Flash Point: 40 �° C

DRYING TIME â?? AT 25 �°
To touch: 6 hours

To Recoat: 12 hours

Specific gravity: 0.89

Solvent: White spirit

TEX PRIMER WHITE
Tollens Tex primer is an acrylic co-polymer primer with very fine aggregates, specially designed for priming masonry surfaces for all water based textured paints

PROPERTIES
Colour : White

Solids: 45% +/- 2%

Theoretical Coverage 9 -10 m2

Recommended film thickness: dry 30u wet 80u

DRYING TIME â?? AT 25 �°
To touch: 1 hour

To Recoat: Min. 5 hours

Vehicle type: acrylic co-polymer

Specific gravity: 1.55

Epoxy Primer Grey is a two pack polyamide cured primer generally used for epoxy system on masonry surface and cement works.

PROPERTIES
Colour : Grey

Finish : Matt

Theoretical Coverage 6-7 m2/lit on masonry surface

Spreading rate is theoretically calculated and can be effected by substrate preparation thinning and methods of application.

Solids (volume) : 24�±2%

Curing time : 3-6 hours at 25 �° C

Full cure : 7 days

Flash point : 25 �° C (ISO 367 â??83)

Specific gravity : 1.00 when mixed A+B

Pot life : 4 hours at 25 �° C

Mixing ratio : 4 parts base"A" : 1 part hardner "B"

Solvent : Epoxy thinner.

High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life. Normally Tollens Epoxy primer grey A+B mixing pot life is 4hrs.As a diluent use Tollens Epoxy thinner 15 â?? 25 %.

Shipping : Support Sea freight

Payments:This supplier also supports L/C payments.

Quick Details

CAS No.:
Acrylic Emulsion

EINECS No.:
Acrylic Emulsion

Main Raw Material:
emlusion

Application Method:
Brush

Brand Name:
REGENT HIGH GLOSS EMULSION

MF:
Acrylic Emulsion

Place of Origin:
GBA-Alderney

Usage :
used for water-based ink and pverprint varnish production

State :
Emulsion

Model Number: :
REGENT HIGH GLOSS EMULSION

100 Gallon/Gallons (Min. Order)

Payments:This supplier also supports L/C,T/T,Western Union payments.

Quick Details

lace of Origin:
United Arab Emirates

Usage:
Building Coating, Texture Paint for interiors and exterior

State:
Alkyd

Model Number:
Regent high gloss enamel Premium

Main Raw Material:
Acrylic

Application Method:
Brush

Brand Name:
Regent Paints

Supply Ability
Supply Ability:
20000 Gallon/Gallons per Day

Packaging & Delivery
Port
Jebel Ali
Lead Time :
As per your Requirement

>=100 Gallons
US$11.50

Payments:This supplier also supports L/C,T/T,Western Union payments.

Place of Origin: United Arab Emirates

Main Raw Material :Acrylic

Usage : Building Coating, Texture Paint for Exterior and Interior

State: : Liquid Coating
A Signature Product defining your value and the feel on the walls of your hones and offices. The sheen, the durability, the coverages impart the most outrageous range to your access.

Velvet Acrylic Emulsion is an environmentally friendly acrylic emulsion based interior decorative coating designed for velvet effects and to simulate a prestigious architectural appearance to the surface. It offers excellent adhesion and an easy to clean coating.

Colour: Full range as per shade card

Finish: Pearlescent-Satin
Vehicle Type: Acrylic
Solids( volume) : 42 ± 2%
Specific gravity: 1.03 ± 0.05
Theoretical Coverage: 260 - 400 sq. ft. per gallonMetal drums one US gallon, 5 US gallon, 20 litres, 20 kg, 25 kg and 1000 Litres Totes

Bulk Buying:

1 Totes = 264 Gallons
1 Barrel = 55 Gallons

Bulk Shipping:

We ship containers. And It will accommodate
1 container of 20 feet = 80 barrels
1 container of 20 feet = 18 totes
Application Method :Brush

Brand Name : Regent Paints

Supply Ability
Supply Ability:
20000 Liter/Liters per Day

Packaging & Delivery
Packaging Details
1 ltr , 4 ltrs , 20 ltrs , 20 KG , 25 KG , 1000 ltrs
1 US Gallon, 5 US Gallon

Port : Jebel Ali

Lead Time : 1 week

>=100 Gallons
US$ 6.50

Payments:This supplier also supports L/C,T/T,Western Union payments.

Payments:This supplier also supports L/C,T/T,Western Union payments.

>=100 Gallons
US$11.50

Shipping:
Support Sea freight

Payments:This supplier also supports L/C,T/T,Western Union payments.

Place of Origin:
United Arab Emirates

Usage:
Building Coating, Wall Coating

State:
LIQUID

Model Number:
High gloss enamel alkyd

Main Raw Material:
ALKYD

Application Method:
Brush

Brand Name:
High gloss enamel alkyd

BULK AND RETAIL:
ALL COLOR

Port
Jebel Ali

Lead Time :
As per your requirements


Main Raw Material ALKYD
Application Method Brush
State LIQUID
Packaging & Shipping
We ship 20 feet containers. It will accommodate
1 US gallon x 4000 CANS
5 US gallon x 950 buckets
1000 liters x 18 Totes

Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.

Place of Origin:
United Arab Emirates

Usage:
Building Coating, Rubber Coating

Main Raw Material:
bitumen