High-density polyethylene, the English name is "High-Density Polyethylene", referred to as "HDPE". HDPE is a highly crystalline, non-polar thermoplastic resin. The original HDPE has a milky white appearance and a semi-transparent shape in a thin section. PE has excellent resistance to most of the characteristics of living and industrial chemicals. Certain types of chemicals can cause chemical corrosion, such as corrosive oxidants (concentrated nitric acid), aromatic hydrocarbons (xylene), and halogenated hydrocarbons . The polymer is non-hygroscopic and has good water vapor resistance and can be used for packaging purposes. HDPE has excellent electrical properties, especially high dielectric strength, making it suitable for wire and cable. Medium to high molecular weight grades has excellent impact resistance, both at ambient temperatures and even at low temperatures of -40F.
Density (g/cm3): 0.95 Power ash%: 0.1 Tensile strength: 22 Elongation at break%: 600 Environmental stress cracking: 1500
- We are selling plastic raw Granules LLDPE, LDPE, Virgin grade. - Standard 25 kg package or Pallet.
- Secure pallets and protect products. - Our machine stretch film rolls secure pallets in transit and work with all wrapping systems. - This easy to apply machine film protects fragile products of almost any size and shape with a tear-resistant layer. It can also prevent box contents from moving during storage or shipping. - Concealing parcel contents, choose our strong and opaque black blown film. Both varieties guarantee consistent performance to the end of the roll. - Size, shape and colour options Choose clear cast stretch film for use in quieter areas, or opaque black blown film for concealing valuable contents. The clear film comes in a range of lengths and widths; to suit pallets and products of all sizes. - Weights and limits Strength is measured in micron thickness and is displayed on the table above. Our tear-resistant rolls range from 14 to 30 microns. - Materials Diamond machine stretch film is made from Linear Low-Density Polyethylene (LLDPE). This is stronger and more resistant to punctures than standard polythene, so it offers your products greater protection. It is also easy to use and flexible enough to secure awkward shapes. - Environmental information All our films are designed to be green, clean and environmentally friendly. Like PE films, our machine stretch film rolls are also fully recyclable and may be used in Energy from Waste (EfW) processes to generate heat and electricity. - Sold individually or in a pallet.
Item Test Condition Test Method Value Unit Density ISO 1183 0.950~0.955 g/cm MFR 190 °C/2.16kg ISO 1133 1.7~2.5 g/10min Tensile strength at yield ISO 527-2 24 MPa Elongation at break ISO 527-2 >600 %
Tests Value Unit Melt Flow Rate (MFR) 2.0 ±0.4 g/10min Density 920 ±2 Kg/cm3 Tensile Strengthat Yield 8 Mpa Tensile Strengthat Break 12 Mpa haze 15 % widely used for producing containers, such as, dispensing bottles, wash bottles, tubing, etc.
Tests Value Unit Melt Flow Rate (MFR) 3.2 g/10min Density 0.939 g/cm3 Melting Point 127 C Tensile Yield Strength 21 Mpa Tensile Strength at Break 28 Mpa Elongation at Break 1,100 % Flexural Modulus 750 Mpa Brittle Temperature
Premium grade HDPE, LDPE, PP, polyethylene granules for your production.
LDPE Greenhouse Ag Film and Flakes
Pet Flakes
To Perfectly Insulate The Joints Of Your Cables, Head To Head Or Branch Of Junctions Casting resins are suitable for: Mechanical fixing of components Electrical insulation Protection against corrosion Reduction of sensity against mechanical stress like vibration, impact, push, bending and tensile forces Better heat transfer Protection of components against tampering, guarantee control We can offer the appropriate product for your demand Temperature stable from 40 to 550 C Each viscosity you require soft to hard Transparent or coloured Handling by hand or by filling machine for cast resin systems Potlife: very short (10 sec) to 3 hours Hot or coldcuring 1 or 2component systems 1 kg to 30 tons per batch ISO RC cast resin cable joint and branch off boxes made to reliably connect and branch off low voltage power cables: Proved suitability and quality since more than 30 years Optimized regarding occupational and environmental safety, contains 60% raw materials from renewable native sources Simple handling, few parts, precut gaskets Extensive advising and service ISO RC cast resincable joint boxes for applications up to 0,6 / 1 kV Quality controlled according to DIN/ISO/EN 9001/29001 Application The belly type cable boxes are designed to branch off and connect small to large consumers. Using PVC or VPE insulated cables and screw compact tap connectors. Design Divided, halogen free, hinged housing, especially designed to provide enough space for the tap connector. Parallel placed branch off cable, pre glued seals and pre cut gaskets which can be easily adjusted to cable size. Electrical and mechanical protection is achieved by RLSWtype cast resin ISO PUR K 2000 or fast curing ISOFILL A2. Mounting Branch off and main cable are connected with compact tap connectors or single connectors. The com plete mounted cable box is sealed via the large opening at the top of the cable box and afterwards closed with a sliding cap. The cable ditch may be closed quickly since the sealing compounds are fast curing systems. Delivery Housing, gaskets, sliding cap, mounting kit, cast resin, mounting instruction. The cast resin can be delivered in 2chamber bags or tins. Accessories Screw compact tap connectors, single connectors compression connectors.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190°C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50°C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 °C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190°C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50°C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 °C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test Condition Test Method Value Unit MFR 190°C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 °C
Pet bottle scrap.
Ldpe Recycled Pellets.
Recycled plastic.
Pvc recycling.
Scrap Pp Hdpe.
Pp Recycled Plastic Scrap, Plastic Scrap.
