The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Various types of machinery and production lines. tires and accessories for cars, motorcycles and tractors,ships. food and additives. minerals, metals and alloys. medical equipment, chemicals..
Copper wire, Aluminum.Copper wire, Aluminum
Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).
Metal scrap like copper scrap, aluminium scrap, car engine scrap, all car parts scrap.
Dry fruits, organic dry nuts, seeds, grains, vegetable oils, sunflower oil, soybean oil, canola oil, animal feeds, scrap metals, copper wire scrap, a4 copy papers. food grade chemicals.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Top Quality CPU Scrap for Sale Fast Delivery & Secure Payment Options! We offer premium-grade CPU scrap for recycling and refining purposes. Whether you're in the electronic recycling business or looking for valuable materials, our CPU scrap is the perfect solution. Why Choose Us? Premium Quality: All our CPU scrap is carefully sourced and inspected for top-tier quality. Fast Delivery: Get your order delivered within 3-5 days! Flexible Payment Options: We accept payments via TT (Telegraphic Transfer), MoneyGram, and Western Union for your convenience. 30-Day Refund Policy: If you're not satisfied with your purchase, we offer a hassle-free 30-day refund policy. Contact us today to place your order and take advantage of our fast and reliable service!
Scrap metals.Broker agent
Aromatic chemicals, foods grade chemicals, wood products , seeds , livestock , milks , butter , seafood , juice , hygiene products, organic products , spices , scrap metals , beef , carbonated drinks, chicken , coffee , confectioneries , copy papers , cream , eggs , nuts , oil, cheese , meat , pork , pulse , sugar , water , jet ski , animal feeds , grains , vegetable oils ..Import and export services
Aluminum Wheel Scrap Technical Process (Mould Designing Mould Cutting Mould Testing Mould Workshop Mould Heating) Extruding (Aluminium Ingot&Supplementary Materials Smelting Homogenizing Bar Heating ) Aluminum wire scrap Composition: Si : 0.2-0.6% Fe : 0.35% Cu : 0.1% Mn :0.1% Mg : 0.45-0.9% Cr :0.1% Zn :0.1% Application: Aluminum alloy production , Steel making and requirements of the coating is not high Fireworks production 1.mainly used for melting ingot 2.discontinuous melting with scrap 3.easy control and operation 4.fast melting 5.energy saving This Scrap Aluminium is produced in the production of industrial waste.Such as:Scrap Aluminium Wire,Scrap Aluminium block and so on. We offer the clients with quality Aluminium Scrap that is used in various industries for making new aluminium products. Our range of Aluminium Scraps is free from unwanted content and corrosion resistant in nature thus highly demanded in the domestic.(EL)
Commodity: Aluminum Used Brewered Cans Origin:Thailand Specification: Aluminum Content 98% Min Si% 0.3 max Fe% 0.7 max Cu% 0.25 max Mn% 1.0-1.5 Mg% 0.8-1.3 Cr% 0.1 max Zn% 0.25 max Ti % 0.1 max Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. UBC suppliers are not allowed to use steel straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC briquette does not contain shredded material. Wooden pallets are not allowed to build the bundles. The briquette density is required to be in the range of 450kg/m3 to 700kg/m3 The preferred briquette size is: 0.40 x 0.30 x 0.30m and all briquettes should ideally be of uniform size. 24 bundles ( 1000 kg each)per container 40'HC Impurities:3% maximum as below: Moisture 0.7% Sand 0.6% Garbage 0.4% Paper & Vinyl 0.1% Ash 0.1% Magnetic Metals 0.5% Heavy Material 0.5% Dirt 0.1% Impurities 3.0% Non UBC target 3.0% If the impurities plus moisture is lower than 3%, there is no claim due to these non UBC. Radioactive source:None Fumigation Pallet a) Should be treated with Fumigation b) According to ISPM No.15(International standards for phytosanitary)
We are devoted to making sustainable improvement to offer superior quality products, satisfactory services uninterruptedly for the market and competitive price for the customer. We believe to make you satisfy, is our target forever. Under our efforts, we have already established good business relationship with some domestic and overseas. Our Goods remain free from Dust Particles, External Coatings, Oil or grease coatings and foreign contamination. We are capable to supply around 100 MT per week or as per buyers capacity. In very brief, our specialization and expertise lies in trading all kinds of ferrous and non ferrous scrap, specifically are as follows below: COPPER WIRE SCRAP 99.9 ALUMINUM EXTRUSION 6063 ALUMINUM UBC CAN SCRAP BOPP FILM (ROLL) SCRAP
The Compressor Scrap offered by us has good recycle value and are widely in demand. We are offering Compressor Scrap at very reasonable price for the convenience of the customers. Description Fridge/AC Compressor Scraps We sell Fridge/AC Compressor Scraps at a very competitive market price. Please let us know if you have a target price.
We are suppliers of BEST QUALITY Copper Wire ScrapAnd Looking for serious buyers in need of our products, contact with us for more details. Copper wire scrap refers to discarded or waste copper wires and cables that are no longer in use and are collected for recycling purposes. These scraps can come from various sources, including industrial processes, construction and demolition sites, electrical and electronic equipment, and more. Copper wire scrap is valuable for recycling because copper is a highly sought-after material due to its excellent electrical conductivity and other useful properties. Here are some key points about copper wire scrap: Collection: Copper wire scrap is collected from various sources where copper wires and cables are no longer needed. This can include old appliances, electronics, discarded wiring, and more. Sorting and Processing: Once collected, the copper wire scrap needs to be sorted and processed. This might involve removing any non-metallic attachments, such as insulation, plastic coatings, or other materials. The goal is to obtain a relatively pure copper material for recycling. Recycling: The sorted copper wire scrap is then typically processed through various recycling methods. One common approach is to chop or shred the scrap into smaller pieces, which are then melted down in furnaces to separate the copper from any remaining impurities or coatings. Refining: After melting, the recovered copper is further refined to ensure its purity. This can involve processes like electrolytic refining, similar to the process used to produce copper cathodes. The result is high-quality copper that can be used for various applications. Applications: The recycled copper obtained from copper wire scrap can be used to produce a wide range of copper-based products. These include new wires and cables, plumbing pipes, electrical components, and more. The recycled copper retains its excellent electrical and thermal conductivity properties, making it valuable for industries that require such characteristics.