British Ores Minerals Suppliers and Manufacturers

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Cenospheres (aluminosilicate microspheres) are hollow aluminosilicate glass ceramic beads ranging in size from 400-500 microns 20-50mkm (most often from 100 to 250 microns), which are formed during high-temperature combustion of pulverized coal. The chemical composition of the main component of the cenospheres is silicon oxide SiO2 (45-60%), aluminium oxide Al2O3 (15-40%), iron oxide Fe2O3 (1.0-10%), calcium oxide CaO (1.5- 4.5%), potassium oxide K2O (2.0-4.5%) and other certain oxides that make up the balance of the content are typically less than 1.0%. Due to the unique set of physical and chemical characteristics of the cenospheres, they are used in the manufacturing of various composite materials. They are used in solving technical issues that require: reduction in the weight material with a low thermal conductivity, high strength, volume efficiency, increased resistance to erosion and aggressive environments.

Kiyanite recently mined and fresh from the soil ready to export.. item located outskirts Zambia.. Product can be shipped worldwide

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

Chromite Iron Ore Sand Cast Sand Foundry Sand Available Sizes for Chromite Iron Ore Sand Cast Sand Foundry Sand: AFS20-25 AFS25-30 AFS30-35 AFS35-40 AFS40-50 AFS40-45 AFS45-50 AFS50-55 AFS55-60 AFS60-65 Chemical Composition of Chromite Iron Ore Sand Cast Sand Foundry Sand: Cr2O3 46.0% FeO 26.5% Al2O3 15.5% SiO 1.0% MgO 10.0% CaO 0.30% Cr/Fe:1.55:1 Physical composition for Chromite Iron Ore Sand Cast Sand Foundry Sand: Appearance:Black Melting poin:2150C pH:7-9 The amount of the acid 2 ML Percent soil 0.1 Percent Moisture 0.1 The sintered 1600 Percentage of free acid present in the sand: 0 Packing: 1000Kgs Chromite Iron Ore Sand Cast Sand Foundry Sand/big bag Supply Ability: 8000Ts Chromite Iron Ore Sand Cast Sand Foundry Sand/month

Copper Ore, Copper Concentrate, Copper Powder, Copper Plates, Copper Coils, Copper Sheets, Lead Ore. We sell copper ore,copper concentrate, copper cathodes, Copper Wire, Copper Plates, Copper Coils, Copper Sheets, Copper ingogts ,copper scraps,iron ore, manganese ore, chrome ore, lead ore with competitive prices. once you have such demand, kindly feel free to contact us.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.

Silica gel is a desiccant and adsorbent material known for its ability to absorb moisture and maintain a dry environment. It consists of small, porous, and translucent beads of silicon dioxide (SiO2), and it is commonly found in small packets or pouches within product packaging to protect against moisture damage. Silica gel is invaluable for preventing the growth of mold, mildew, and corrosion in various products, such as electronics, leather goods, and pharmaceuticals. It is also used in industries like food packaging, where it helps extend the shelf life of products by reducing humidity and preventing moisture-related spoilage. Silica gel's exceptional moisture-absorbing properties and non-toxic nature make it a practical and widely used solution for preserving the quality and longevity of a wide range of items.

Quartz recently mined and fresh from the soilâ?¦ ready to export.. item located outskirts Zambia.. Product can be shipped worldwide

Pure silica quartz piecer are from Sri Lanka. Mines are situated at Rathana pura area of Sri Lanka. Workers collect the quartz from the mining site with the help of a machinery. Quartz pieces are washed and packed in to suitable containers for world wide shipping. Can export to any where in the world. Shipping port is Colombo Sri Lanka. Payment methods are Bank transfer LC. 20 feet containers or any other required size containers can use according to buyers request. Can supply on monthly basis according to buyers request. Silica quarts are suitable to make powder "Pure natural quartz lumps" from mining industry in SriLanka.