CPI -1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI-1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI-1507-32 Viscosity @ 40C, cSt, ASTM D445 31.72 Viscosity @ 100C, cSt 5.28 Viscosity @ 100F, SUS 165.0 Viscosity @ 210F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60F, ASTM D4052 9.43 Pour Point F (C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F (C), ASTM D92 350 (177) Fire Point, C.O.C.,F (C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications
The CPI-1508 Series compressor lubricants are formulated using a polyalkylene glycol (PAG) base fluid combined with a high performance additive package. These lubricants are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, oxidative and thermal stability enable the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1508 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1508 Series fluids are especially advantageous in compressors operating in harsh chemical environments, particularly sour gas (H2S present) applications, due to their robust formulation. Applications and Compressor Type Flooded rotary screw compressors Sour gas applications Heavy hydrocarbon gas stream applications Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
CPI-1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI -1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI -1507-32 Viscosity @ 40 C, cSt, ASTM D445 31.72 Viscosity @ 100 C, cSt 5.28 Viscosity @ 100 F, SUS 165.0 Viscosity @ 210 F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60 F, ASTM D4052 9.43 Pour Point F ( C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F ( C), ASTM D92 350 (177) Fire Point, C.O.C., F ( C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications.
CPI -1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI -1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI -1507-32 Viscosity @ 40 C, cSt, ASTM D445 31.72 Viscosity @ 100 C, cSt 5.28 Viscosity @ 100 F, SUS 165.0 Viscosity @ 210 F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60 F, ASTM D4052 9.43 Pour Point F ( C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F ( C), ASTM D92 350 (177) Fire Point, C.O.C., F ( C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications.
CPI -1507-150 is a polyalkylene glycol lubricant, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of this lubricant is to withstand dilution by hydrocarbon gases is particularly advantageous in liquid ring vacuum pump and centrifugal compressors handling high concentrations of hydrocarbon and gasoline vapors. CPI-1507-150 is a heat-stable polymer in the absence of oxygen. It is soluble in water. Test Procedure CPI-1507-150 Viscosity @ 40C, cSt, ASTM D445 115.1 Viscosity @ 100C, cSt 17.61 Viscosity @ 100F, SUS 587 Viscosity @ 210F, SUS 90.5 Viscosity Index, ASTM D2270 159 Density, lb/gal, 60F, ASTM D4052 9.27 Pour Point F (C), ASTM D97 22 (-5.6) Flash Point, C.O.C., F (C), ASTM D92 495 (257) Fire Point, C.O.C., F (C), ASTM D92 540 (282) Specific Gravity, ASTM D4052 1.11 These are typical values and are not intended for use in preparing specifications.
The CPI-1507 Series compressor lubricants are formulated using a premium polyalkylene glycol (PAG) base fluid combined with a high-performance additive package. They are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent oxidative and thermal stability enabling the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1507 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1507 Series fluids are especially advantageous in high temperature and heavy gas stream applications due to their excellent thermal and oxidative stability and negligible hydrocarbon dilution. Applications and Compressor Type Flooded rotary screw compressors Heavy hydrocarbon gas stream applications Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Excellent lubricity Increased efficiency and reduced cost of operation Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
" The CPI-1507 Series compressor lubricants are formulated using a premium polyalkylene glycol (PAG) base fluid combined with a high performance additive package. They are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent oxidative and thermal stability enabling the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1507 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1507 Series fluids are especially advantageous in high temperature and heavy gas stream applications due to their excellent thermal and oxidative stability and negligible hydrocarbon dilution. Applications and Compressor Type Flooded rotary screw compressors Heavy hydrocarbon gas stream applications Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Excellent lubricity Increased efficiency and reduced cost of operation Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
CPI -1009-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 69 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20 C ASTM D4052 0.88 Pour Point ( C) ASTM D97 -39 Flash Point, C.O.C., ( C) ASTM D92 226 Fire Point, C.O.C., ( C) ASTM D92 246 "
CPI-1009-68 is formulated with high quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 69 Viscosity @ 100C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 226 Fire Point, C.O.C., (C) ASTM D92 246
CPI-1008-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package that includes patented seal swell technology. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and signifi cantly reduced lubricant consumption. Our patented seal swell technology minimizes leaks due to poor elastomer performance. CPI-1008-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia system leaks Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 68 Viscosity @ 100C, cSt ASTM D445 8.9 Viscosity Index ASTM D2270 111 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 240 Fire Point, C.O.C., (C) ASTM D92 268
"The CPI-1005-68 product is a custom-blended, highly refined, dewaxed, chemically inert lubricant. Silicone additions act as a lubricity improver, defoamant, pour point depressant and help protect the metal surfaces against corrosion. Widely used for applications where the lubricant is subjected to harsh chemical environments. Contains an additive compatible with sour hydrocarbon (H2S) gas systems. APPLICATIONS -- Lubricant/coolant for process and gas rotary screw compressors. -- Lubricant/coolant for process applications. Especially effective in combating corrosion and promoting long life in sour hydrocarbon gas compressors. Test Procedure CPI-1005-68 Viscosity @ 40C, cSt, ASTM D445 69 Viscosity @ 100C, cSt 9.1 Viscosity @ 100F, SUS 357 Viscosity @ 210F, SUS 56.5 Viscosity Index, ASTM D2270 100 Density, lb/gal, 60F, ASTM D4052 7.4 Pour Point F (C), ASTM D97 -40 (-40) Flash Point, C.O.C., F (C), ASTM D92 440 (226) Fire Point, C.O.C., F (C), ASTM D92 475 (246) Specific Gravity, ASTM D4052 0.89 These are typical values and are not intended for use in preparing specifications. "
"The CPI-1005 Series compressor lubricants are formulated using highly hydrocracked and is dewaxed mineral oil coupled with an additive package that is specifically designed to give superior performance in compressor systems. These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, low pour point, and excellent shear stability ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1005 Series lubricants are especially advantageous in compressors operating with harsh chemical environments, particularly with sour gas (H2S present) applications, due to their robust formulation. Applications and Compressor Type Flooded rotary screw compressors Reciprocating compressors Sour gas applications Applications with harsh chemical environments Features and Benefits Corrosion protection (H2S) Resistance against H2S corrosion Low pour point Suitable for use in low temperature environments Excellent lubricity Increased efficiency, reduced cost of operation Shear stability Increased service life "
Duracell battery.
Automotive.
Arsenic chemical.
Electronic & industrial products.Technical service assistance, product watch, calibration service, volume pricing service, re-reeling service, fast despatch service, sourcing service.
Precious stones and minerals.Export
Fly Screens Mesh Rolls 30.5 m Rolls
Minimum Order Size : 2 million Barrels shipped monthly on a 12 month contract. Renewable after 12 months we only deal with buyers directly and on SBLC. We can ship any amount over 2 million barrels T/T
Bonny Light Crude Oil (BLCO) Min 35.0 Max 37.0 (+/-5%) Maximum Quantity: 2,000,000 Barrels per Month Price: Gross USD $89.00BBL - $85.00 CIF FOB TTO Negotiated per SPA. TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
