British Industrial And Automotive Suppliers and Manufacturers

Ethanol 95% - Industrial Ethyl Alcohol Acetic acid, beverage, essence, dye, fuel and so on can be made by Ethanol / Ethyl alcohol. Ethyl alcohol also used in medically, ethanol with a volume fraction of 70 to 75 percent is commonly used as a disinfectant. Ethanol is widely used in defense chemical industry, medical treatment, food industry and agriculture. Ethanol can be used as an industrial feedstock : Solvent; Organic synthesis; Crystallization of various compounds; The detergent.Extracting agent; Alcohol can be mixed with liquor; Used as an adhesive;Nitro spray paint;Varnish, cosmetics, ink, paint off solvent and pesticide, medicine, rubber, plastic, artificial fiber, detergent and other manufacturing raw materials, can also do antifreeze, fuel, disinfectant 7) Ethanol 75% solution is commonly used for medical sterilization. Ethanol can be used as Disinfection supplies Ethanol can be used as Beverage products Ethanol can be used as organic raw material Ethanol can be used as automotive fuel Ethanol can be used as pharmacological action.

Ethanol Alcoholic Beverages: Ethanol is the primary alcohol found in alcoholic beverages such as beer, wine, and spirits. It is produced through fermentation of sugars by yeast. Industrial Applications: Solvent: Ethanol is widely used as a solvent in various industries, including pharmaceuticals, cosmetics, paints, and inks. It can dissolve a wide range of substances, making it valuable in extraction processes and as a cleaning agent. Fuel: Ethanol is used as a biofuel additive in gasoline (usually referred to as ethanol fuel or E85), promoting cleaner combustion and reducing emissions. Medical and Pharmaceutical Uses: Antiseptic: Ethanol is an effective disinfectant and antiseptic agent used in healthcare settings for cleaning skin and medical instruments. Preservative: Used in pharmaceutical preparations and cosmetics to improve stability and shelf life. Food and Flavorings: Ethanol is used in food processing as a solvent for extracts, flavorings, and as a carrier for food additives. Laboratory Applications: Chemical Reagent: Ethanol is commonly used in laboratories as a solvent and reagent in various chemical reactions and synthesis processes.

IRON ORE PELLETS Fe 64% monthly volume 50,000 mt. Full specification is available on request, Iron Ore Pellets: Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste. The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more. Product Type: IRON ORE PELLETS Fe (T) 64 % Si02 1.150 % Fe0 0.75 Max Ti02 0.021% Al2O3 0.319 % Ca0 1.170 % P 0.032 % S 0.031 % V205 0.004 % Cu 0.057 % N2O 1.290 % Mg0 0.069 % CCS 309 Size 16-19 mm - 7 % 09-16 mm -91 % 06-09 mm 2 % Tumbler Index- for above 6.3 mm 96.2 % - 95 % min Abrasion Index â??for 0.5 mm 3.8 % - 4 % max Sticking Index 950 deg C 20.1 % Bulk Density 2.17 % Compression Strength 270 Kg / Pellet / 150 kg / pellet Fines below 5mm (-) 5 mm 3 % max Reducibility index 55-65 % . NOTE: Interested parties please contact us with your LOI

Iron Ore, Manganese Ore,Chrome Ore, Iron Ore Lumps, Iron Ore Fines, Mill Scales, Copper Ore, Lead Ore. We sell iron ore, iron ore fines, iron ore lumps, hematite iron ore, magnetite iron ore with vairous grades, if you have such demand, pls feel free to contact us. Iron ore is the source of primary iron for the world's iron and steel industries. It is therefore essential for the production of steel, which in turn is essential to maintain a strong industrial base. Almost all (98%) iron ore is used in steelmaking. Iron ore is mined in about 50 countries. The seven largest of these producing countries account for about three-quarters of total world production. Australia and Brazil together dominate the world's iron ore exports, each having about one-third of total exports

Ultrafine Copper Powder and High Purity Copper Ingots We are looking for real buyers familiar with the purpose of extra-pure metals. We, as manufacturers of high-purity metals, announce that we can supply the following products: Ultrafine copper powder (PMU) of isotopic composition Chemical purity - 99.999%. Quantity: up to 25 tons monthly. Price: 385 EUR/kg. Chemical purity - 99.9999%. Quantity: up to 5 tons monthly. Price: 3850 EUR/kg. High purity copper ingots (grades C5N, C6N) Quality: 99.999% Cu of oxygen-free copper. Quantity: up to 50,000 kg monthly. Price: 385 euro/kg. Quality: 99.9999% or more for the requirements of special thermal and electrical conductivity, cryogenic, acoustic and other properties, at a negotiated price. C6N ingots up to 5000 kg per month. Price: 385 euro/kg. SPECIFICATION COPPER POWDER PMU and HIGH PURITY COPPER INGOTS Product name: COPPER POWDER ULTRAFINE and HIGH PURITY COPPER INGOTS Purity not less than: 99,999% - 99,9995% The isotopic composition is that of natural cooper: Cu63 (69,09+/- 0,05%), Cu65 (30,91+/- 0,05%) Powder structure: Is not laminated Melting point: 1084 C Packing: PET jar of 2 kg. A plastik box contains 15 pcs. Net weight - 30 kg. Minimum delivery volume of 200kg.

Used shipping Containers for sale !! PREMIUM QUALITY. For Storage!! We have all you need (10ft,20ft,40ft,45ft,53ft) Etc New and Used shipping Containers available for sale. Double Doors Containers with Windows High cubes and standard height Contact us for more detailed information if interested.

Aluminum Ingots /Aluminum ingot A7 99.7% and A8 99.8% /aluminium alloy ingot We are exclusively engaged with our expertise in offering a wide range of Aluminum Ingot. These Ingots are manufactured using the essential quality basic material. Our Ingots are well acknowledged for their enhanced durability. Offered completely manufactured Ingots are available in miscellaneous sizes at a very competitive price. Provided Ingots are checked as per the set parameters of the industry, before final dispatch. Features: â?¢ Durability â?¢ Sturdiness â?¢ Optimally finished Additional Information: Item Code: AI-01 Appearance : Silvery white Length : 740MM (+/- 10%) Width : 170MM (+/- 10%) Thickness : 90MM (+/- 10%) weight of one ingot : 25KG (22-25 KG) Quality : AL 99.70, AL 99.50, AL 99.00 Packing 25KG/INGOT, 1000KG or 1050KG/bundle, or as your recquirment

Description by Manufacturer Chemical Composition: All Weight: 20/25kg per ingot Al (Min): 99.7%-99.9% Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of the ingot is clean and smooth.Applications:1. mainly used for melting ingot2. discontinuous melting with scrap3. easy control and operation4. fast melting5. Used for industry such as automobile,pinning and weaving,electron broadly and so onAl Content:99.7% minWeight: 20/25kg per ingot MOQ:1*20FCL( 25MT+-10% )Alloy Or Not:Non-alloy H.S.Code:7601101000

PRODUCT SPECIFICATIONS: Heavy melting steel (HMS) or heavy melting scrap is broken up into two major categories: HMS 1 and HMS 2, where HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. HMS is typically traded as a blend of 1 and 2, either a premium blend (80/20) or lower grade mixes (70/30) and (60/40). For example, HMS 1 and 2 (80/20) should consist of HMS 1 and 2 in the ratio of 80% (HMS 1) and 20% (HMS 2). Each grade guarantees a minimum piece thickness: at least 1/4 inch (6.3 mm) for HMS 1, and 1/8 in for HMS 2 Payment Method: Bank Transfer (TT) , WESTERN UNION, RIA, CRYPTO CURRENCY NB: We don't accept LC Payment Terms : 20% against Invoice and 80% against BL HMS 1 and 2 specifications as defined by ISRI (North America's Institute of Scrap Recycling Industries): ISRI SPEC 200 (HMS 1) Wrought iron and/or steel scrap 1/4 inch and larger in thickness. All pieces must be smaller than 60.24 in. ISRI SPEC 201 (HMS 1) Same as ISRI 200 except pieces must be smaller than 36.18 in. ISRI SPEC 202 (HMS 1) Same as ISRI 200 except pieces must be smaller than 60.18 in. ISRI SPEC 203 (HMS 2) Wrought iron and/or steel scrap, black and galvanized, 1/8 inch and larger in thickness. ISRI SPEC 204 (HMS 2) Same as ISRI 203 except pieces must be smaller than 36.18 in. ISRI SPEC 205 (HMS 2) Same as ISRI 204 except it may contain automotive scrap, except for thin guage material. ISRI SPEC 206 (HMS 2) Same as ISRI 205 except pieces must be smaller than 60.18 in.

1. purity 99.995% 2. Surface: mill, brush, mirror, bright, shiny, hair line, sand blast, etching, etc. 3.Weight of each sheet: 125kgs (+/- 1%) 4.Net weight of each pallet: 2mts (+/- 1%) 5.Min. weight in each container: 25mts approx. 6.Gross weight of each container: 27.20mts approx. 7.Dimensions: 914*914*12mm Application: copper sheet can be made to do all sorts of deep drawing and bending stress components, such as manufacturing pins, rivets, gasket, nuts, conduits, the barometer spring, screen, radiator parts, etc Why choose us: 1.100% factory manufacture and factory direct sales 2.Competitive price and quality guaranteed 3.Small order is welcomed. 4.Sample free is available . 5.Different specifications (purity and particle size and more) of the product can be selected. 6.Delivery on time. 7.We have through the ISO 9001 quality management system certification. 8.We have a professional team and technical personnel, can solve all the problems you meet Payment Method: Bank Transfer (TT) , WESTERN UNION, RIA, CRYPTO CURRENCY NB: We don't accept LC Payment Terms : 20% against Invoice and 80% against BL

1. purity 99.995% 2. Surface: mill, brush, mirror, bright, shiny, hair line, sand blast, etching, etc. 3.Weight of each sheet: 125kgs (+/- 1%) 4.Net weight of each pallet: 2mts (+/- 1%) 5.Min. weight in each container: 25mts approx. 6.Gross weight of each container: 27.20mts approx. 7.Dimensions: 914*914*12mm Application: copper sheet can be made to do all sorts of deep drawing and bending stress components, such as manufacturing pins, rivets, gasket, nuts, conduits, the barometer spring, screen, radiator parts, etc Why choose us: 1.100% factory manufacture and factory direct sales 2.Competitive price and quality guaranteed 3.Small order is welcomed. 4.Sample free is available . 5.Different specifications (purity and particle size and more) of the product can be selected. 6.Delivery on time. 7.We have through the ISO 9001 quality management system certification. 8.We have a professional team and technical personnel, can solve all the problems you meet . Payment Method: Bank Transfer (TT) , WESTERN UNION, RIA, CRYPTO CURRENCY NB: We don't accept LC Payment Terms : 20% against Invoice and 80% against BL

Copper Cathodes 1. purity 99.995% 2. Surface: mill, brush, mirror, bright, shiny, hair line, sand blast, etching, etc. 3.Weight of each sheet: 125kgs (+/- 1%) 4.Net weight of each pallet: 2mts (+/- 1%) 5.Min. weight in each container: 25mts approx. 6.Gross weight of each container: 27.20mts approx. 7.Dimensions: 914*914*12mm Application: copper sheet can be made to do all sorts of deep drawing and bending stress components, such as manufacturing pins, rivets, gasket, nuts, conduits, the barometer spring, screen, radiator parts, etc Why choose us: 1.100% factory manufacture and factory direct sales 2.Competitive price and quality guaranteed 3.Small order is welcomed. 4.Sample free is available . 5.Different specifications (purity and particle size and more) of the product can be selected. 6.Delivery on time. 7.We have through the ISO 9001 quality management system certification. 8.We have a professional team and technical personnel, can solve all the problems you meet Payment Method: Bank Transfer (TT) , WESTERN UNION, RIA, CRYPTO CURRENCY NB: We don't accept LC Payment Terms : 20% against Invoice and 80% against BL

1. purity 99.995% 2. Surface: mill, brush, mirror, bright, shiny, hair line, sand blast, etching, etc. 3.Weight of each sheet: 125kgs (+/- 1%) 4.Net weight of each pallet: 2mts (+/- 1%) 5.Min. weight in each container: 25mts approx. 6.Gross weight of each container: 27.20mts approx. 7.Dimensions: 914*914*12mm Application: copper sheet can be made to do all sorts of deep drawing and bending stress components, such as manufacturing pins, rivets, gasket, nuts, conduits, the barometer spring, screen, radiator parts, etc Why choose us: 1.100% factory manufacture and factory direct sales 2.Competitive price and quality guaranteed 3.Small order is welcomed. 4.Sample free is available . 5.Different specifications (purity and particle size and more) of the product can be selected. 6.Delivery on time. 7.We have through the ISO 9001 quality management system certification. 8.We have a professional team and technical personnel, can solve all the problems you meet Payment Method: Bank Transfer (TT) , WESTERN UNION, RIA, CRYPTO CURRENCY NB: We don't accept LC Payment Terms : 20% against Invoice and 80% against BL

Copper Cathodes 1. purity 99.995% 2. Surface: mill, brush, mirror, bright, shiny, hair line, sand blast, etching, etc. 3.Weight of each sheet: 125kgs (+/- 1%) 4.Net weight of each pallet: 2mts (+/- 1%) 5.Min. weight in each container: 25mts approx. 6.Gross weight of each container: 27.20mts approx. 7.Dimensions: 914*914*12mm Application: copper sheet can be made to do all sorts of deep drawing and bending stress components, such as manufacturing pins, rivets, gasket, nuts, conduits, the barometer spring, screen, radiator parts, etc Why choose us: 1.100% factory manufacture and factory direct sales 2.Competitive price and quality guaranteed 3.Small order is welcomed. 4.Sample free is available . 5.Different specifications (purity and particle size and more) of the product can be selected. 6.Delivery on time. 7.We have through the ISO 9001 quality management system certification. 8.We have a professional team and technical personnel, can solve all the problems you meet Payment Method: Bank Transfer (TT) , WESTERN UNION, RIA, CRYPTO CURRENCY NB: We don't accept LC Payment Terms : 20% against Invoice and 80% against BL

20ft 6058 x 2438 x 2591 MM 40ft HQ 12192 x 2438 x 2896 MM 45ft HQ 13716 x 2438 x 2896 MM Flat rack 20ft / 40ft

product origin : Middle East

Standard aluminium is aluminum ingots containing 99.7% aluminium and is registered on the London market. 1.mainly used for melting ingot 2. discontinuous melting with scrap 3. easy control and operation 4. fast melting 5. Used for industry such as automobile,pinning and weaving,electron broadly and so on The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00. specification: Product Name: Aluminum ingot for remelting (AL99.50-99.9) Dimensions: about 823*183*110 mm Weight: about 25 kg Bale weight: about 1050kg Each delivery unit (25 tons) : 23 bales Packing material: 0.9 x 32 mm steel strip, surface treated with anti-rust. "#" shape binding, binding firm.