Our Cold Pasting Gum Powder possesses a consistent viscosity, excellent adhesive property, high strength film property, best tackiness, is fast drying and available in a wide range of water solubilities. This product is highly appreciated for its purity, high effectiveness, precise pH value, and long shelf life. This is a type of pasting powder which is primarily used for imparting superior stiffness and strength to laminated boards and considered as an ideal choice for making corrugated sheets. -Applications: -Labels (Regular and Waterproof) -Used in Carton Board and Corrugated Boxes Manufacturing -Wood Adhesives -Paper Sacks -Stamps, book bindings, envelopes -Parameters BiPAS:�?� -Appearance -Free Flowing , off white Powder -pH of 10% Slurry - 8-11 -Moisture - Maximum 10% -Viscosity in B4 Cup [1:6] 28-32 Seconds
Mineral powder.
Cow and gate baby powder.
Baby milk powder.FOB
Baby milk formula.
Aluminum Scrap, Battery Scrap, Compressor Scrap, Copper Wire Scrap, Electric Motors, Plastic Raw Materials.
Soybeans, sunflower stripes, sunflower black,chilli powder, crushed chillies, paprika powder, red bell pepper granules ,garlic powder and garlic powder granules..
Palm oil, rice, garments, sugar, vegetable oil, sunflower oil, footwear, milk powder, potatoes.Sourcing agent
Coconut shells, coconut shell powder..
Copper cathode SPECIFICATIONS: DIMENSIONS 914MM X 914MM X 12MM WEIGHT PER SHEET 125KG (+/- 1%)   NET WEIGHT PER PALLET 2MT APPROXIMATELY MINIMUM WEIGHT IN EACH CONTAINER 25MT APPROXIMATELY GROSS WEIGHT OF EACH CONTAINER 27.2MT APPROXIMATELY PACKAGING PALLETIZED, ALUMINUM BAND COPPER CATHODE CHEMICAL ANALYSIS CU 99.99-99.97% BASIS, REJECTION BELOW 99.97 INSPECTION: SGS or CCIC or Similar; OTHER ELEMENTS Silicate (Si) 0.3ppm Tellurium (Te) 0.5ppm Cobalt (Co) 0.2ppm Silver (Ag) 10ppm Lead (Pb) 0.2ppm Selenium (Se) 0.3ppm Iron (Fe) 2ppm Sulphur (S) 4ppm Aluminum (Al) 0.5ppm Magnesium (Mg) 0.4ppm Manganese (Mn) 0.5ppm Oxygen (O2) 0.00ppm Nickel (Ni) 0.2ppm Non Radioactivity Antimony (Sb) 0.1ppm Arsenic (As) 0.1ppm Bismuth (Bi) 0.1ppm Bill of lading: The official document, issued at the load port after completion of the loading operations, stating among other things, the shipâ??s loaded quantity, expressed in Cubic Meters (M3) and in Metric Tons (MT) per the definitions herein. This document has to be signed in original by the shipâ??s Master and made out in accordance without the instruction hereinafter specified in the Agreement
Commodity WHITE REFINED CANE SUGAR ICUMSA 45 RBU Payment LC or MT 103 / 23 Delivery ASWP Origin Brazil Loading Port Brazil ASWP Min. Order 12.500 MT Packing 50 kg (net weight) new poly-lined jute bag or equivalent Inspection SGS (On Loading Port) POP After BCL Letter of Credit Irrevocable, Transferable, Revolving, Confirmed Letter of Credit by a top 25 bank PB 2 % Monthly Stock Ask Capacity Ask Specification QUALITY STANDARD/ SPECIFICATION SPECIFICATIONS: ICUMSA 45 SUGAR, ORIGIN: BRAZIL POLARITY at 20ºC: 99.80° Minimum SULPHATED ASH CONTENT: 0.04% Maximum by weight MOISTURE: 0.04% Maximum by weight MAGNETIC PARTICLES: Mg/kg 4 SOLUBILITY: 100% Dry and free flowing GRANULOMETRY: Fine standard ICUMSA: Colour 45 ICUMSA attenuation index Units (Method #10-1978) Maximum AS: 1 P.P.M. COLOUR: Brilliant White SEDIMENTS: None SO2 Mg/Kg: 20 Max REDUCING SUGAR: 0.010% Maximum in Dry Mass RADIATION: Normal w/o presence of cesium or iodine SO2: mg/kg 20 SMELL Free of any smell HPN STAPH AUREUS: NIL per 1 mg HEAVY METALS, TOXIC ELEMENTS: Maximum mg / kg basis ARSENIC: 0.50 CADMIUM: 0.05 COPPER: 1.00 LEAD: 1.00 MERCURY: 0.01 ZINC: 3.00 SUBSTANCE: Solid Crystal PESTICIDE TRACES: Maximum mg / kg basis DDT: 0.005 PHOTOXIN: 0.01 HEXACHLORAN GAMMA ISOMER: 0.005 MICROBIOLOGICAL LIMITS: Nil PATHOGENIC BACTERIA including SALMONELLA per 25 gram: Nil Bacillus per gram: Nil Crop 2017
Middle World Nitrile Powder Free Gloves Direct to Factory - 10 Million allocation per month Minimum Order Quantity: 33,000 Boxes 8.25 GBP OTG UK
Chromite ore, iron ore, silica quartz lumps, copper ore, lapis lazulli, soap stone, molybdenum, formica lead.
Titanium raw materials in bar, plate, sheet, wire, tube, coil etc.
Powder baby milk.
Spray starch derived from either maize or tapioca is applied by means of spraying and is used primarily in the production of paper, boards, and ply. This modified starch: - Increases the strength of ply bonds in boards and plywood. - Increases the bending and spring back tendency of boards. - Reduces the de-lamination of plywood and laminated boards. Parameter: -Appearance- fine free flowing white powder -Viscosity in Brookfield Viscometer -Min 2000 cps -Moisture Content- Max 13.0% -pH of 10% slurry- 6.0 - 8.0 -Ash Content- Max 1.0% -Brightness -Min 85.0% Cold water Solubility Max 4.0%
Produced by the hydrolysis of corn-starch, through an eco-friendly process, our white dextrin has a wide range of applications: - Can be used at higher solids levels than native or modified starches - To create stronger bonds - Have more tack - Dry faster than pastes made from unmodified starch - Is soluble in water Dextrin pastes provide excellent machinability and can be used in: - Adhesives and coatings that come into contact with food products - Child-safe school pastes - Removable wallpaper - Bag/envelope seams - Paper and textile sizing. Parameters: -Appearance- Off white free flowing powder -pH of 10% Slurry -2.5 - 3.5 -Moisture -Max 10% -Ash content -Max 1% -Free acidity- Max 5ml -Cold water solubility -Min 85%
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
Our A grade maize starch meets the highest standards and is a versatile product that can be applied across a variety of industries such as: Textiles (sizing, finishing, printing) Paper and cardboard Glues and Adhesives Rubber and foam Paint fillers and putty Cosmetics Detergents Aluminium and Cast-Iron Foundries Fireworks Dry battery cell This multifunctional product can be modified to your needs and our sales team would be more than happy to help you find the starch that fits your industrial requirements. -Parameters : -Appearance-Free Flowing Cream-White Powder -pH of 10%- Slurry 4.5 - 7.0 -Moisture Content- Max 13.0% -Viscosity of 5% solution in Brookfield viscometer at 75C- Min 1400 Cps -Viscosity of 2% solution in RedWood No.1 viscometer at 75C -Min 34 sec -Fibre Content(100gram) -Max 1.0 ml -Sieve retention on 100 mesh -Max 1.0% -Ash Content- Max 0.2% -Sulphur Dioxide- Max 100 ppm -Brightness -Max 90.0% -Protein Content Max 0.45% -Free Acidity (10 gram)- Max 4.0 ml -Petroleum Extractable Matter- Max 0.25% -Acid Insoluble Ask- Max 0.05% -Alcoholic Acidity @90% Alcohol- Max 2.0 ml -Starch content- Min 98.0%
Tapioca starch is used across a variety of culinary disciplines and is particularly useful for thickening, gelling, binding, and stabilising food products. The tapioca starch that we manufacture provides: - Neutral flavour and appearance - Superior texturizing, mouthfeel, and freeze-thaw qualities - Crispiness to crumb coats - Structural resilience to baked goods, noodles, and pastas. - A great nutritional value since it is rich in calcium and vitamin B12. Tapioca starch may be applied in various foods including : -Soups, sauces, and dressings - Baked items, e.g. pastries and pies - Extruded foods - Cooked meats - Ice cream and Ice cream cone manufacturing - Noodles and pastas Parameters: -Appearance- Free Flowing Cream-White Powder -pH of 10% Slurry- 5.0 - 7.0 -Moisture Content- Max 12.0% -Viscosity of 2% solution in Redwood No.1 viscometer at 75C Min 50 sec Viscosity of 5% solution in Brookfield viscometer at 50C -1500cps -Fibre Content (100 gram)- Max 0.5 ml -Sieve retention on 100 mesh- Max 1.0% -Ash Content- Max 0.2% -Sulphur Dioxide- Max 50 ppm -Brightness- Min 93.0% -Free Acidity (10 gram)- Max 1.5 ml
