Brazing alloys-precious metal based, silver copper phosphorus, copper phosphorus, brazing fluxes.
Copper and copper alloy products.
Product Description And Chemical Composition / Packaging Specifications related to the content and quality of goods are as per details below: Non-LME Registered Primary Aluminium Ingot Purity: 99.7% Appearance: Silvery White Individual Ingot Weight: 22.5 kg Individual Ingot Dimensions: 740mm x 170mm x 114mm Number of Ingots per Bundle: 44 Bundle Dimensions: 740mm x 740mm x 1,025mm Nominal Weight of Bundle: 1,000 kg Bundle Strapping Material: Polyester Straps Strapping configuration: 3 Parallel Straps Chemical Composition Origin Russia or Ukraine Price $1850 MOQ (Trial) = 250 MT. Monthly quantities up to 2,000 5,000 MT available. A Element % Content Silicon (Si) 0.10 max. Iron (Fe) 0.20 max. Zinc (Zn) 0.03 max. Gallium (Ga) 0.04 max. Vanadium (V) 0.03 max. Others (Each) 0.03 max. Others (Total) 0.10 max. Aluminium (Al) 99.7% min. B Element %Content Aluminium (Al) 99.7 min. Silicon (Si) 0.10 max. Iron (Fe) 0.20 max. Zinc (Zn) 0.03 max. Gallium (Ga) 0.03 max. Copper (Cu) 0.01 max. Magnesium (Mg) 0.02 max. Others each 0.03 max. Total of other impurities 0.30 max.
Aluminum Scrap, Battery Scrap, Compressor Scrap, Copper Wire Scrap, Electric Motors, Plastic Raw Materials.
JW Innovation Ltd specializes in supplying various kinds of cashew nuts such us cashew nuts W210, W240, W320, LP, SP, BB... with high quality and best price
Copper wire scrap,Copper Wire Scrap ,Millberry Copper99.9% High Quality Cheap Copper Wire Scrap/Millberry 99.95% Copper Wire Scrap 1) Our copper scrap includes wires, tubes, and plates, etc. 2)The size is chips or other. 3) Copper content could meet customers need. Application: Electrical, light industry, machinery,national defense industry . Copper Scrap is industry a important sources of the raw materials, all kinds of can be recycled Recycling waste production with copper
Copper cathode SPECIFICATIONS: DIMENSIONS 914MM X 914MM X 12MM WEIGHT PER SHEET 125KG (+/- 1%)   NET WEIGHT PER PALLET 2MT APPROXIMATELY MINIMUM WEIGHT IN EACH CONTAINER 25MT APPROXIMATELY GROSS WEIGHT OF EACH CONTAINER 27.2MT APPROXIMATELY PACKAGING PALLETIZED, ALUMINUM BAND COPPER CATHODE CHEMICAL ANALYSIS CU 99.99-99.97% BASIS, REJECTION BELOW 99.97 INSPECTION: SGS or CCIC or Similar; OTHER ELEMENTS Silicate (Si) 0.3ppm Tellurium (Te) 0.5ppm Cobalt (Co) 0.2ppm Silver (Ag) 10ppm Lead (Pb) 0.2ppm Selenium (Se) 0.3ppm Iron (Fe) 2ppm Sulphur (S) 4ppm Aluminum (Al) 0.5ppm Magnesium (Mg) 0.4ppm Manganese (Mn) 0.5ppm Oxygen (O2) 0.00ppm Nickel (Ni) 0.2ppm Non Radioactivity Antimony (Sb) 0.1ppm Arsenic (As) 0.1ppm Bismuth (Bi) 0.1ppm Bill of lading: The official document, issued at the load port after completion of the loading operations, stating among other things, the shipâ??s loaded quantity, expressed in Cubic Meters (M3) and in Metric Tons (MT) per the definitions herein. This document has to be signed in original by the shipâ??s Master and made out in accordance without the instruction hereinafter specified in the Agreement
* Product: Copper Scrap * TYPE: WIRE Covered With Rubbers * Purity: 99.99% * Price: USD 4,600 per Ton * Origin: Ghana � West Africa * Quantity: 1000 Tons (subjected to 100 Tons Trial shipment) * LOADING PORT: Tema Port Harbor. * Packaging: Loose / Big bag of 500KG put in Container * Specification: As per export standard request Copper: 99, 9% Carbon: 0.03% Coblet:
Commodity WHITE REFINED CANE SUGAR ICUMSA 45 RBU Payment LC or MT 103 / 23 Delivery ASWP Origin Brazil Loading Port Brazil ASWP Min. Order 12.500 MT Packing 50 kg (net weight) new poly-lined jute bag or equivalent Inspection SGS (On Loading Port) POP After BCL Letter of Credit Irrevocable, Transferable, Revolving, Confirmed Letter of Credit by a top 25 bank PB 2 % Monthly Stock Ask Capacity Ask Specification QUALITY STANDARD/ SPECIFICATION SPECIFICATIONS: ICUMSA 45 SUGAR, ORIGIN: BRAZIL POLARITY at 20ºC: 99.80° Minimum SULPHATED ASH CONTENT: 0.04% Maximum by weight MOISTURE: 0.04% Maximum by weight MAGNETIC PARTICLES: Mg/kg 4 SOLUBILITY: 100% Dry and free flowing GRANULOMETRY: Fine standard ICUMSA: Colour 45 ICUMSA attenuation index Units (Method #10-1978) Maximum AS: 1 P.P.M. COLOUR: Brilliant White SEDIMENTS: None SO2 Mg/Kg: 20 Max REDUCING SUGAR: 0.010% Maximum in Dry Mass RADIATION: Normal w/o presence of cesium or iodine SO2: mg/kg 20 SMELL Free of any smell HPN STAPH AUREUS: NIL per 1 mg HEAVY METALS, TOXIC ELEMENTS: Maximum mg / kg basis ARSENIC: 0.50 CADMIUM: 0.05 COPPER: 1.00 LEAD: 1.00 MERCURY: 0.01 ZINC: 3.00 SUBSTANCE: Solid Crystal PESTICIDE TRACES: Maximum mg / kg basis DDT: 0.005 PHOTOXIN: 0.01 HEXACHLORAN GAMMA ISOMER: 0.005 MICROBIOLOGICAL LIMITS: Nil PATHOGENIC BACTERIA including SALMONELLA per 25 gram: Nil Bacillus per gram: Nil Crop 2017
Used rails R50-R65: Specifications Of Used Rails R50 R65:- 1. R50(51.67KG/Meter, GOST 7173-55) 2. R65(64.72KG/Meter, GOST 8161-75) Composition : C - 0.71 - 0.84%: Mm-0.75 - 1.25 % : Si- 0.18 - 0.55% : S - not more than 0.045% : P - not more than 0.035% Nominal Specification for R-50 (51.67KG/M, GOST-7173-75): Carbon - 0.4%- 0.58% Manganese - 0.75% 0.88% Silicon - 0.13% ? 0.28% Sulphur - 0-045% to Max Phosphorous - 0.035% to Max Arsenic - 0.13% to Max Nominal Specification for R-65(64.72KG/M, GOST -81(65-75): Carbon - 0.4%- 0.58% Manganese - 0.75% 0.88% Silicon - 0.13% ? 0.28% Sulphur - 0-045% to Max Phosphorous - 0.035% to Max Arsenic - 0.13% to Max
Coltan, copper, copper millbery, copper cathode, cast aluminium, drains car battery, HMS 1&2 scraps.Sourcing agents
Stainless coil, mild steel coil, aluminum coil.
Metals such as steel, cast iron, aluminium, copper.
Our A grade maize starch meets the highest standards and is a versatile product that can be applied across a variety of industries such as: Textiles (sizing, finishing, printing) Paper and cardboard Glues and Adhesives Rubber and foam Paint fillers and putty Cosmetics Detergents Aluminium and Cast-Iron Foundries Fireworks Dry battery cell This multifunctional product can be modified to your needs and our sales team would be more than happy to help you find the starch that fits your industrial requirements. -Parameters : -Appearance-Free Flowing Cream-White Powder -pH of 10%- Slurry 4.5 - 7.0 -Moisture Content- Max 13.0% -Viscosity of 5% solution in Brookfield viscometer at 75C- Min 1400 Cps -Viscosity of 2% solution in RedWood No.1 viscometer at 75C -Min 34 sec -Fibre Content(100gram) -Max 1.0 ml -Sieve retention on 100 mesh -Max 1.0% -Ash Content- Max 0.2% -Sulphur Dioxide- Max 100 ppm -Brightness -Max 90.0% -Protein Content Max 0.45% -Free Acidity (10 gram)- Max 4.0 ml -Petroleum Extractable Matter- Max 0.25% -Acid Insoluble Ask- Max 0.05% -Alcoholic Acidity @90% Alcohol- Max 2.0 ml -Starch content- Min 98.0%
A J Services manufacture a selection of a volume control dampers or VCD which have been designed for fitting to the ducting in HVAC systems. Volume control damper help to regulate the air velocity which flows through the ducting which has been connected to a heating, ventilation and air conditioning system being able to regulate the volume of air passing through the ducting means that the rooms or space where the air is distributed will reach desired temperature faster. This means that less energy is used, which will ultimately mean lower energy bills. The dampers are manufactured in a variety of styles depending on the application they will be used within. With options for ducts with both high and low velocities, can be provided in a large number of sizes starting at 50mm with the largest going up to 2000mm. Because ducting changes shape depending on the system it is being implemented in the dampers which are provided reflect this and circular, oval, rectangular and square choices are available, with dampers being produced in galvanised, stainless 304/316 and aluminium. For the larger VCD in the rectangular dampers the blades can appear both in and out of the air stream, however because of the rectangular casing surrounding the larger circular VCD the blades will appear out of stream. These VCD are connected to the ducting via a spigot, so are slotted directly onto the ducting. For the smaller more specialised dampers such as single blade, constant volume and butterfly shutter the blades are most typically put of air stream as the components ergonomic design encompasses the blades inside the main housing of the damper
