Virgin Base Engine Oil
This is a full synthetic lubricant based on carefully selected very high quality base oils, providing outstanding wear and sludge protection, even under the most severe driving conditions. Due to its enhanced frictional properties, improved fuel economy is obtained.
This is a full synthetic lubricant based on carefully selected very high quality base oils and high quality additives of the latest generation, specially designed to meet the strict requirements of manufacturers. This provides an excellent fluidity at low temperatures, a very low resistance when starting, an exceptional viscosity index and a very high thermal stability.
Multigrade engine oil suitable for all petrol and diesel engines in all working conditions and during the whole year. Due to the high content of active components, this oil can be used all year round in the toughest conditions. Because of the high resistance against ageing, it is possible to apply longer drain periods. Available in 1L, 4L and 210L drum.
A Belgium engine motor oil with Ch4 suitable for all diesel engines with natural aspiration or turbocharging, in all working conditions in all seasons and long drain periods, up to 15.000 km depending the circumstances. Total engine protection : performance in keeping the engine clean. Drain interval extension : long period between oil change. Available in 1L,5L and 210L.
ATF III Is a synthetic ATF (Automatic Transmission Fluid), designed on the basis of high quality hydrocrack oils with a special additive and inhibition, which ensure a perfect function of the automatic transmission. Available in 1L and 4L packaging. 1 carton contains 4x4L.
EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
EQUINAS TFO 60i High Quality Inhibited Transformer Oil EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
ETRO 4+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydro-treatment - and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: ETRO 4+ is the preferred choice for formulating cost effective, high-performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability Formulation Support: ETRO 4+ is supported with top-tier engine oil formulations that meet the requirements for: API SN ILSAC GF-5 ACEA 2012* OEM Specifications
ETRO 6+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and is hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low temperature performance. It has an excellent viscosity-volatility relationship. Applications: ETRO 6+ is an excellent choice for formulating cost effective, high performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low viscosity engine oils Superior low temperature performance Good oxidation stability Formulation Support: ETRO 6+ is supported with top-tier engine oil formulations that meet the requirements for: API SN ILSAC GF-5 ACEA 2012* OEM Specifications
Premium greases are formulated with both Lithium, calcium soap mixed type
Lubricants.Trading, shipping & transportation
Automotive lubricants.
Petrochemical : base oil / furnace oil / mho / cst range/ used engine oil / bitumen, bio diesel : used cooking oil / specially blended soybean / canola oils for industrial use (insultating oil) / cnsl (cashe nut shell liquid) automotive & industrial oils & lubricants (manufactured to every specific blend / brands ) waste food solutions aluminum used beverage cans (ubc) / aluminum ingots.Logistics team can provide with prices based on ex tank in uae, fob in uae seaports and cif to the destination port of the buyers. we can arrange to supply in flexitanks (20ft container), ibc tanks and drums (208 litres)
Engine oils & lubricants..
All lubricants, hydraulic oil, engine oil, gear oil, compressor oil, turbine oil greases etc.
Bitumen, base oil group i,ii,iii, lubricants, white oils , greases.
Petrochemical products, petrochemical equipment, polypropylene, lldpe , hdpe, urea 46%(granular/prilled) bitumen vg 40 , petroleum bitumen, fuel cst 380, rpo, lubricants motor oils (low to medium tier) grease (calcium nlgi 3) green rubber, crude oil ,base oil , gas oil , granule sulfur, methanol, acid acetic , meg, deg, teg, peg, mea, dea, tea, dpg .lab .hab.
Gasoil 10 ppm 1000 ppm 1500 ppm 2000 ppm 3000 ppm 5000 ppm, kerosene, white spirit, naphtha condensate, wax, heavy fuel oil, asphalt, lubricating oil, base oils, bitumen, sulphur lumps , sulphur granular , urea tg grade, prilled & granular rock phosphate.Trading company
Petroleum & petrochemical, fuel oil, lubricants, kerosene, gas oil, naphtha, aromatics, methanol,glycols, solvents, lpg/lng.
