Molecular BioProducts Thin-wall PCR tubes PurePak0.5mL Individual Tubes with flat caps Red Description: Thin wall construction assures uniform contact with the thermal cycler temperature block for optimal heat transfer. Available in both 8 tube strips and individual 0.2 mL and 0.5 mL tubes to cover all applications. Extensive quality inspections to ensure consistent performance. PurePak 4 mL thick puncture proof packaging keeps tubes contamination free. Tubes are certified free of DNase, RNase, Nucleic acids, ATP and Pyrogens.
SCMTRS10-96 10ul 10ul Pipette Tip Short, Rack 96tips/rack, 50racks/ctn 8.1 49.5 28.5 38 10UL SHORT PIPETTE TIP All of the tips made from 100% polypropylene. Tips are designed to fit the most popular pipettors. 3package can be chosen: Bulk, Rack, Refill. 9 capacity for your demands: 10ul Short, 10ul Long, 200ul, 300ml, 1000ul, 1250ul, 5ml Short, 5ml Long, 10ml
Hemagen Analyst Benchtop Blood Chemistry Analyzer . This unit was manufacturer refurbished on July 2002 and never used since. It comes with Manuals, Neutral Rotor, Printer Paper, and Replacement Fuses. Get profile, panel or single test results in 10 minutes for glucose, BUN, creatinine, BUN/creatinine ratio, uric acid, cholesterol, triglyceride, GOT, total bilirubin, alkaline phosphatase, GPT, GGT, calcium, total protein, and amylase. All reagents are dry and pre-packaged to minimize operator error and to increase productivity. No interference from fibrin clots saves rotors, time and rerun costs. Sample requirement is just 90 ul of plasma or serum allowing you to test even the smallest patients. Interfaces with most Veterinary Practice Management Software programs. This unit is completely reconditioned and recertified.
New and unused. Comes with configuration manager software 1.0, power supply, temperature verification cartridge, 2 system verification cartridges(30 sec. And 300 sec.) Features: Performs rapid and accurate tests within minutes Two level QC lockout Preprogrammed valid operator IDs and notes Store up to 400 QC results and 400 patient results Offers liquid and electronic quality controls Customizable programming options with Configuration Manager software Test Menu: ACT-LR: Low Range Activated Clotting TIme ACT+: Activated Clotting Time Plus PT: Prothrombin Time Citrate PT: Citrate Prothrombin Time APTT: Activated Partial Thromboplastin Time Citrate APTT: Citrated Partial Thromboplastin Time.
PC-controlled and Windows-based operation interface Easily connected to a printer or other exterior devices via USB port 7'' touch screen display, full-color alphanumeric-capable graphical user interface(GUI) Visualized real time speed graphic display A virtually unlimited number of user-defined recipe programs Stainless steel coating bowl (optional polyethylene coating bowl) Optional auto-dispensing and nitrogen purge Rigid mechanical design protects the coating solutions from contact of drive system Leading resolution and repeatability standard of this industry Free technical support for the life of product via phone, e-mail, and fax. Technical specifications: Size: 19 inch X 14 inch X 11 inch Machine Weight: 19.0Kg Power: 110/220 VAC, 50/60 Hz, 1 Amp Vacuum: More than 2.1 CFM 40 process recipe programs on board Spin speed: 0 to 5, 000 RPM Spin resolution: 1RPM Spin repeatability: 1RPM 1s resolution for step time(Max. Step time 9, 999s) Spin speed acceleration: 0 to 30, 000 RPM/s unloaded Substrate sizes: 10 mm to 200 mm round.
DipMaster 50 DIP Coater is a specially designed tool for performing the feasibility study of research & development in thin films and coatings from the experts in the DIP coating technology. It is compact and light for easy setup in the laboratory: Fume hoods, glove boxes, magnetic stirrer, laminar airflow benches, etc. To be convenient to conduct experiment. The maintenance-free feature comes from its ruggedness and simple design. The coater can be easily configured into a system to do a single solution coating or multiple solution coatings by the combination of the coater with the solution management modules. Programmable microcomputer controlled: Immersion speed, submersion period, withdrawal speed Touch screen interface Multi-mode dipping Vibration free immersion and withdrawal Easy to use, affordable, desk-top Compact: Easily configured with a glove box Equipped with a magnetic substrate holder Customized substrate holder for irregular substrates. Least maintenance CE certified Voltage: 110V/8A, 220V/4A Dimension: 15 cm x 30 cm x 35 cm Net Weight: 5Kg Withdrawal Speed: 8mm-200mm/minute Withdrawal Distance: Up to 75mm Substrate size: Up to 50mm X 50mm Four different dipping modes Dipping time: 0-999s.
CHEMAT Technology, Inc. Has designed and manufactured a compact and easy-to-use spin-coater, Model KW-4A, for precise and uniform deposition of thin films and coatings. Its rugged, vibration-free and portable design makes it a versatile tool for your research facility. A two-stage spin process allows dispensing at low speeds and homogenizing the coating at high speed. The KW-4A spin coater can be used to deposit metal oxide thin films, polymer coating and organic thin films. 2-Stage Spinning Stage 1: 500-2, 500 rpm 2-18 Seconds Stage 2: 1, 000-8, 000 rpm 3-60 Seconds. Power 115 VAC, 60 Hz, 1 Amp 220 VAC, 50 Hz, 1 Amp Vacuum: > 2.1 CFM Speed Stability:
CHEMAT TECHNOLOGY, INC. Has designed and manufactured a compact and easy-to-use hotplate, Model KW-4AH, for baking and curing thin films and coatings. Its rugged, portable design, and temperature uniformity make it a versatile tool for research facilities. In conjunction with KW-4A spin coater, KW-4AH hotplate can be used to fabricate metal oxide thin films, polymer coatings and metal organic thin films. Operation: Manual Load Process Control: Program (For details see OMRAN operation manual) Temperature fluctuation: 1C Temperature uniformity: 3% Temperature Range: ¡ª30C - 350C (KW-4AH-350) ¡ª30C - 600C (KW-4AH-600) Substrate Size: ¡ª7.5 inch X 7.5 inch(KW-4AH-350) ¡ª5.8 inch X 5.8 inch(KW-4AH-600) Inert gas purge (KW-4AH-600 only).
UV curing is a photochemical process by which monomers undergo curing (polymerization or cross inking) upon exposure to ultraviolet radiation. A specially formulated monomer will polymerize when exposed to ultraviolet radiation. This UV "curable" monomer includes a sensitizer which absorbs UV energy and initiates a polymerizing reaction in the monomer. KW-4AUV is specially designed for curing photosensitive coatings and thin films. It equips two UV light sources with radiations at 365 nm and 245 nm. The coated substrates up to 6?in diameter will be rotated at 6 rpm to ensure uniform curing. The built-in interlock door to prevent the exposure of UV radiation gives safe operation. In conjunction with the KW-4A spin coater, the system can be used to make various coatings and thin films via the photochemical process.
Glass figurines My company offers for sale hand blown glass figurines which we import from ukraine. We buy directly from the artisans who make them and offer competitive wholesale prices. These glass figurines are uniquely crafted using age old techniques by master artists in the ukraine. Individual pieces are about 3" tall and 3" wide and weigh about 3 to 4 ounces.
Glass beads, handicrafts, jewellery, gemstones, flutes.Special designing for necklaces, bracelets, belts, bags
Material is borosilicate glass and PP,the normal color is clear and amber.Suitable for HPLC and GC.Has wide application area,it's including food,consumer goods,pharmaceutical,environmental,medical,chemical materials,packing and etc testing. It's economic and convenient suitable for use in Shimadzu VP series, rack 16,Borosilicate glass,olyethylene,Starburst top feature for easy needle penetration,Cap to be packed separately from vials
Material is borosilicate glass and PP,the normal color is clear and amber.Suitable for HPLC and GC.Has wide application area,it's including food,consumer goods,pharmaceutical,environmental,medical,chemical materials,packing and etc testing. It's economic and convenient suitable for use in Shimadzu VP series, rack 16,Borosilicate glass,olyethylene,Starburst top feature for easy needle penetration,Cap to be packed separately from vials
Material is borosilicate glass and PP,the normal color is clear and amber.Suitable for HPLC and GC.Has wide application area,it's including food,consumer goods,pharmaceutical,environmental,medical,chemical materials,packing and etc testing. It's economic and convenient suitable for use in Shimadzu VP series, rack 16,Borosilicate glass,olyethylene,Starburst top feature for easy needle penetration,Cap to be packed separately from vials
The 9mm screw top vials with cap and septa is compatible with autosamplers using 11mm crimp top vials, â?¢Can be used in general autosamplers, Suitable for use in Agilent, Shimadzu or Waters Systems,Wide mouth,Borosilicate glass,Flat bottom,With marking spot,Cap with teflon/silicon/teflon septa,Cap to be packed separately from vials
Laboratory supplier and chemicals.
Laboratory equipment.
Fiberglass.
Fiber glass products, textile, semi- precious & precious stones, non-woven fabric.General representation, brokerage, distribution of merchandise, branding, joint ventures, business outsourcings
Laboratory equipments & instruments.
