Hot-rolled 1100 aluminum plate uses: deep drawing material, bottle cap, wide building curtain wall, bus interior, bus door/engine plate, decoration, aluminum busbar, transformer aluminum, heat sink, etc.; Application of 1100 aluminum foil coil: aluminum-plastic panel, electronic foil, battery foil, etc. The role of aluminum plate 1. It has high corrosion resistance, electrical conductivity and thermal conductivity, low density and good plasticity, and can produce various aluminum materials through pressure processing; 2. The strength of 1100 alloy aluminum plate is low, but it has good ductility, formability and weldability; 3. After anodizing, the corrosion resistance can be further improved, and a beautiful surface can be obtained at the same time;
5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. Itâ??s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing. The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%. Surface Advantages of 5052 Aluminum coils: 1 - surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate. 2 - The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%. 3 - Allow the supplier to illuminate the profile longitudinally to a smooth surface. 4 - Other requirements: There are demanders and suppliers to draw up their own. Application of 5052 Aluminum coils: 5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material. The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
3003 aluminum coil is a common aluminum alloy coil, mainly composed of aluminum and manganese, with good corrosion resistance, workability, and welding properties. Its main uses include manufacturing various types of oil tanks, pipelines, pressure vessels, food and chemical processing equipment, etc. The product characteristics and application scope of 3003 aluminum coil are as follows: Good corrosion resistance, suitable for equipment and structures working in harsh environments. Good deep-drawing and welding properties, easy to process into various shapes and sizes of products. Smooth surface, easy to perform surface treatment and painting. Widely used, including manufacturing automobile parts, building materials, power equipment, electronic components, food packaging, etc. Overall, 3003 aluminum coil is a high-quality aluminum alloy material with good physical and chemical properties, suitable for production and manufacturing in various industrial and civil fields. 3003 aluminum coil is an aluminum-manganese alloy coil, whose main components include: Aluminum (Al): accounting for about 98% of the aluminum coil, it is the main component, with lightweight, high strength, good conductivity, and thermal conductivity. Manganese (Mn): accounting for about 1%~1.5% of the aluminum coil, it can increase the strength and hardness of the aluminum coil, improve its corrosion resistance and weldability. Other elements: 3003 aluminum coil may also contain small amounts of copper (Cu), iron (Fe), silicon (Si), and other elements, as well as trace impurities. The content and proportion of these components will have a certain impact on the performance of 3003 aluminum coil. For example, the content of aluminum and manganese has an important influence on its hardness and strength, and the addition of copper, iron and other elements can improve the heat treatment and processing properties of aluminum coil. Therefore, precise control of its chemical composition is needed during the production of 3003 aluminum coil to ensure its stable performance and excellent quality.
1050 aluminium discs circles possess high aluminum content. They are the most applied alloy on the market and relatively cheaper. 1050 aluminium discs for sale are of high flexibility, corrosion-resistant, and good conductivity to the electricity and heat. The anodised aluminium discs are alomost immune to the discoloration. 1050 Aluminum Circle CC / DC Application: 1050 aluminum circle discs are of good cold-work-molding characteristic, the elongation is between 35%-38%, it's stable and better-valued. 1050 aluminum discs are the softest aluminum disc. As aluminum discs suppliers, Joda Tech usually process the 1050 aluminum circle into cookware set and containers. But 1050 round aluminum discs also have the advantages of aluminum. So 1050 large aluminum discs can be applied in many other industries.
Specification item value Place of Origin USA Brand Name Aluminium Engine Block Scrap Model Number GB/T1196-2002 Type Aluminium Tense Weight 25kg Al Content (%) 99.99% Product Name Aluminium Engine Scrap Material Car Engine Color Silvery White Metal Al (min) 99%-99.97% Grade AA; Typical Chemical Composition Al, Cr, Cu, Fe, Mg, Mn, Si, Ti, Zn Source All Car Engine Brands Alloy or not Alloy Quality Engines are free from dirts, dusts, water, grease and oil Features Free from Nuts, Steel plate, paints
1 Series Aluminium Sheet Introduction 1000 (brand) series aluminum alloy represents 1050, 1060, 1100. In all series, 1000 series belongs to the most aluminum series, purity can reach more than 99.00%. Because it does not contain other technical elements, the production process is relatively single, and its price is relatively cheap. It is currently one of the most commonly used series in the conventional industry. Most of the current circulation on the market is 1050 and 1060 series, 1000 series aluminum plate determine the minimum aluminum content of this series according to the last two Arabic numerals. Its characteristics are: good electrical conductivity, good corrosion resistance, good welding performance, low strength. In terms of use, it is relatively soft, mainly used to do decorative parts or interior parts, mostly used in the chemical industry and special purposes. Aluminum plate refers to the rectangular plate made of aluminum ingot rolling. It can be used for lighting decorations, solar reflective panels, architectural appearance, interior decoration, elevator, sign, automobile interior decoration, household appliances, aerospace and military aspects. Our company produces aluminum plates between 0.5 to 500 mm thick, 500 to 2200 mm wide and 500 to 9000 mm long.
Specification item value Place of Origin USA Brand Name Aluminium Engine Block Scrap Model Number GB/T1196-2002 Type Aluminium Tense Weight 25kg Al Content (%) 99.99% Product Name Aluminium Engine Scrap Material Car Engine Color Silvery White Metal Al (min) 99%-99.97% Grade AA; Typical Chemical Composition Al, Cr, Cu, Fe, Mg, Mn, Si, Ti, Zn Source All Car Engine Brands Alloy or not Alloy Quality Engines are free from dirts, dusts, water, grease and oil Features Free from Nuts, Steel plate, paints
A7, ADC12 & A8 ALUMINUM INGOTS (CIF ASWP) - Quantity: Trial 1,000MT 100,000MT Monthly x 12 - Term: CIF ASWP - Reduced Pricing: $2,035/MT (A7 & A8) - Commission: $25/MT 50/50 (Buyside Open) - Payment Method: Top World Bank SBLC
99.7% Aluminum Ingots
Cold foil is holographic foil that is applied without heat. Mainly used for printing of label and packaging, holographic cold foilâ??s main purpose is to provide shelf appeal to the consumer.
Aluminum A7 -99.70 Origin Tajikistan. Delivery terms FOB, CIF. Price: discount from the LME exchange minus 6-10% depending on volume. Payment Terms SBLC/MT760 from world primary bank, irrevocable, operative, confirmed, at sight, no delay, unconditional, as 100% guarantee of the value of each regular monthly shipment. Duration: 366 days. The SBLC is only a guarantee in case of non-payment. Payment at destination port against SGS/CCIC Report and shipment documents with T/T MT103 or MT202.m)
Grade: 1000 Series Alloy or Not: Alloy Standard: ISO9001, ASTM, JIS, GB Al (Min): 99.7% 99.9% 99.95% 99.99% Chemical Composition: Al;99%-99.99%, Si:0.1-0.8, Fe:0.07-0.5, Cu Max 0.02 Color: Silvery White
We have over 3000 tons of Aluminum and steel scrap on our inventory. Ready to ship
Clean cast aluminum, diecasting grade alloy.
Aluminum ingots.
Aluminum ingots.
Aluminium ingot.
Aluminium foils.
Aluminum coil.
Aluminum extrsuion fabrication finishing.
