British Slipper Material Suppliers and Manufacturers

Polyester chips usually refers to the polyester raw materials obtained from the polymerization production is generally processed into about 4 * 5 * 2 mm or so sheet particles. 1. According to the composition and structure can be divided into: blended, copolymerization, crystalline, liquid crystal, cyclic polyester chips and so on; 2. According to the performance can be divided into: coloring, flame retardant, antistatic, moisture absorption, anti-pilling, antibacterial, whitening, low melting point, viscosity (high viscosity) polyester chips, etc.; 3. According to the use can be divided into: fiber grade polyester chips, bottle grade polyester chips, film grade polyester chips (mainly different process indicators). Fiber grade polyester chips according to which the content of matting agent tio2 can be divided into: super glossy (big glossy), glossy, semi-matte, (full) matte polyester chips. There are also cationic polyester chips. Polyester applications now include fibers, various types of containers, packaging materials, films, films, engineering plastics, and other fields.

Polyvinyl Chloride(PVC) PVC is called poly vinyl chloride, the main ingredients of PVC; it has the bright-colored, corrosion-resistant and durable property. It is often add some plasticizers, anti-aging agent, and additively in the process to enhance its heat resistance, toughness, scalability and so on. All kinds of PVC granules, such as rigid, soft, clear and various colors are available. They are used in extrusion, injection and so on, for PVC profile, PVC frame, pipe, seal raw material. Application Division according to application: 1.Building materials: such as PVC tubing, PVC pipes, panel and section bars. 2.Packing materials. 3.Electronic materials: such as electronic wires, cables,adhesive tapes and bolts. 4.Furniture and ecorating materials,etc. 5.Others: leatheroid, medical disposable products, antiseptic paint,etc.

Rockwool, also known as mineral wool, is an insulation material made from natural stone or mineral fibers. The density of Rockwool refers to the mass of the material per unit volume, and it is commonly expressed in kilograms per cubic meter (kg/m�³) or pounds per cubic foot (lb/ft�³). The density of Rockwool can vary depending on the specific product and its intended application. Common densities for Rockwool insulation products range from approximately 40 kg/m�³ (2.5 lb/ft�³) to 200 kg/m�³ (12.5 lb/ft�³) or more. The choice of density often depends on factors such as thermal performance requirements, structural support needs, and the specific application of the insulation.

Black LDPE granules is produced from European origin post industrial 60/40 and 80/20 grade raw materials. Standard process includes crushing, washing in three separate pools, agglomerating and extruding in two stages. MFI Range (190 -C 2,16 kg ) 0,80-1,00 g/10 min at 190 C 2,16 kg Density 0,91-0,93 g/cm3.

HDPE Blue Drum Regrind consists of HDPE regrind from blue drums scrap (Extrusion Grade Blow Moulding Grade). Cold Washed Clean without any contamination. Packed in jumbo bags for easy loading. We have convenient trade terms and the fastest delivery schedules. what is advantage of hdpe? This strengthening with its UV-resistance makes it ideal for piping and outdoor applications. Pipe grade sheet has the ability to withstand -220 to 180 degrees Fahrenheit. It�¢??s durable in most chemical interactions which make it useful in a lot of industrial applications. HDPE drums regrind 1.Hot water washed and no label, no any contaminant 2.dry and clear flakes 3.white,blue, red, yellow and so on 4.from crates, drums, pallets 5.MFI 0.03-0.1 Specification HDPE Blue Drum Regrind ITEM STANDARD Melt Flow Rate(g/10min) 0.1 Density(g/cm3) 0.95 Power Ash% 0.01 Tensile Strength(MPa) 22 Elongation At Break% 600 Environmental stress-cracking 1500 We are leading trading company, suppliers/exporter of best grade Plastic scraps in South Africa. We are one of the largest exporter of Plastic Scraps. We provide top grade quality to our Buyers. hdpe blue drum price There are several suppliers in the market with each supplier with their own price. The price varies between $300 and $500 per ton . At vitameta ltd we offer best price on bulk order purchase SPECIFICATION: Plastic Scraps Products PET Bottles Scrap LDPE Film Scrap PET Flakes Scrap HDPE Scrap Unvulcanised Rubber Scrap PET Film Rolls ABS Scrap PP Raw Materials EPS Block Scrap E-Waste Products: PVB film scrap LDPE rolls Baby Diapers PU Foams HDPE Granules Our HDPE Blue Drum Flakes are high in quality and relatively low price. We wish to make a long term scrap business deal with reliable and stable Plastic Scrap buyers from all over the world. Interested Plastic Scrap buyers, please contact us today for scrap prices and further details. We are waiting to hear from you soon. Thank you for your time. We offer products like Hdpe Milk Bottles Scrap, Hdpe Milk Bottle Regrind, Virgin Hdpe Granules / Recycled Hdpe Granules, Hdpe Blue Drum Regrind, and Blue PC water Bottle Scrap 99.99% Pure. We are wholesaler dealers of HDPE Blue Drum Regrind, HDPE blue drum flakes supplier. Adding to that We grind HDPE plastic, scraps and sell them domestically and Internationally. Furthermore, We can separate the regrind by color if you want that. Below are some of our HDPE regrind. Moreover, They are ground from crates, barrels, buckets, lids, pipes, plates, bottles and others. Lastly, We sell HDPE CLEAR/NATURAL REGRIND (CLEAN AND WASHED) contact us.

We deal in best quality PVC White Regrinds, which are apt for numerous specifications of pipe, shoes sole, car, toys, bag, carpet, bathroom, medical, furniture, plug, electronic wire &cable series products and an assortment of PVC injection moulding products and so on. These products are applicable in various industries and are made of high quality material as well as advanced equipment. These PVC White Regrinds come with chemical resistance, high strength, uniform density, rigidity, high density and high melting point. Provided products are extremely demanded by our customers for their accurate composition, high effectiveness, high quality, and long shelf life. Product Details: Color White Application PVC PIPE Sources Grinding of PVC Pipes Shape Irregular Filler Content 4%, 8%, 10% Material PVC PIPE Grinding Usage PVC PIPE Min.Quantity 5,000 kgs. Pack Size varies We offer imported PVC pipe regrind with PHR < 7-8% in grey and white colours. This is regularly available. This is used along with virgin resin to bring down the cost. Mainly used for manufacturing pipes.

Polyethylene is the world's most widely used thermoplastic and is made by the polymerization of ethylene. Polyethylene is often classified by its density, because greater density corresponds with greater material rigidity. The world�¢??s largest volume polyethylene is high density polyethylene (HDPE), which has a relatively high degree of tensile strength. Plastic containers represent the most common household use of high-density polyethylene. At the opposite end of the spectrum is low density polyethylene (LDPE), which was the first type of polyethylene to be developed. Flexible packaging represents the most common household use of low-density polyethylene. Both high- density polyethylene and low-density polyethylene are also commonly used for moulding applications. Linear low-density polyethylene (LLDPE) can usually be manufactured at a slightly lower cost than low density polyethylene and has similar basic properties. While low-density polyethylene and linear low-density polyethylene are to a certain extent substitutable for each other, one may be more suitable than the other for a specific application.

High density polyethylene HDPE for non-toxic, tasteless, no smelly white particles, melting point is about 130 C, relative density of 0.941 - 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, and environmental stress cracking resistance.

Product pictures Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation) Category Grade MFI Density Major Applications Homopolymer - Extrusion F103 3.3 0.9 BOPP Film Grade - General Purpose, Lamination & Metallizable films T30S 3.3 0.9 Raffia Tapes ,Woven Sacks for Packaging Fertilizers, Cement, Polymers, Carpet Backing ,FIBC etc. T103 3.3 0.9 Thermoformed Cups, Containers & Other disposable items F110 11 0.9 TQ and Cast Films for General Purpose Packaging etc. Homopolymer â?? Injection Molding M103 3 0.9 General Purpose Injection Molding M106 6 0.9 General Purpose Injection Molding M108 8 0.9 General Purpose Injection Molding M110 10 0.9 General Purpose Injection Molding, Furniture etc. Impact Copolymer â?? Injection Molding M304 3.5 0.9 Automotive Components, Crates, Pails, Furniture etc. M307 7 0.9 General Purpose Injection Molding M310 10 0.9 Battery Boxes M311T 10 0.9 Compounding, Automotive Components, Luggage and Industrial Components M312 12 0.9 Compounding, Industrial Components, Automotive Components, Luggage, Pails, Houseware, Sanitary Wares etc. M315 15 0.9 General Purpose Injection Molding M325 25.0 0.9 Compounding, Automotive Components, Houseware, Appliances parts, Extrusion Coating M340 40 0.9 Appliance & White Goods, Automotive component, Compounding,TWIM Random Copolymer â?? Blow Molding B202S 1.9 0.9 Bottle & Containers for Medical and Transparent Products (e.g. IV Fluid Bottles) etc B200 1.9 0.9 General Purpose Blow Molded & Thermoformed Items, Sheets for Files & Folders. M212S 12 0.9 High Clarity Containers, Household items,Injection Syringe, Laboratory products & ISBM Bottles

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details