The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
item value Place of Origin UK Model Number lead ingot Dimensions 25kg Chemical Composition Sb Sn Zn Fe Cd Pb (Min) 99.99% Alloy Or Not Non-Alloy Secondary Or Not Non-secondary Product name Lead Ingot Pb99.99 Grade and Specification ASTM B749-03 Lead content 99.99% 99.98% 99.9% 99.5% 99.8% Keyword 99.994% High Purity Lead Ingot Color Silver White Packing Customer's Requirements Purity 99.97%Min
We sell Used Rails, HMS, Steel Scaps, Copper Scraps, Aluminum Scraps, Mill Scales with large quantites and competitive prices, If you have such demand, pls feel free to contact us. Payment terms TT Only
We are suppliers of BEST QUALITY Copper Wire ScrapAnd Looking for serious buyers in need of our products, contact with us for more details. Copper wire scrap refers to discarded or waste copper wires and cables that are no longer in use and are collected for recycling purposes. These scraps can come from various sources, including industrial processes, construction and demolition sites, electrical and electronic equipment, and more. Copper wire scrap is valuable for recycling because copper is a highly sought-after material due to its excellent electrical conductivity and other useful properties. Here are some key points about copper wire scrap: Collection: Copper wire scrap is collected from various sources where copper wires and cables are no longer needed. This can include old appliances, electronics, discarded wiring, and more. Sorting and Processing: Once collected, the copper wire scrap needs to be sorted and processed. This might involve removing any non-metallic attachments, such as insulation, plastic coatings, or other materials. The goal is to obtain a relatively pure copper material for recycling. Recycling: The sorted copper wire scrap is then typically processed through various recycling methods. One common approach is to chop or shred the scrap into smaller pieces, which are then melted down in furnaces to separate the copper from any remaining impurities or coatings. Refining: After melting, the recovered copper is further refined to ensure its purity. This can involve processes like electrolytic refining, similar to the process used to produce copper cathodes. The result is high-quality copper that can be used for various applications. Applications: The recycled copper obtained from copper wire scrap can be used to produce a wide range of copper-based products. These include new wires and cables, plumbing pipes, electrical components, and more. The recycled copper retains its excellent electrical and thermal conductivity properties, making it valuable for industries that require such characteristics.
Get the best deals on ALUMINIUM UBC (USED BEVERAGES CANS) SCRAP with West Metal Company. We provide premium quality scrap metal at competitive prices with
Specifications Drained Copper Compressor â?? Fridges/AC RAINS per ISRI Specifications Our copper content on Monthly Supply Capacity Type: Fridges, AC. Packaging Detail:� Wood Pallets According to ISRI Specification in Containers Quantity: Between� per month Minimum Order acceptable What do seal units look like? They are usually found in a heavy container that is typically made of steel and encases electric motors. Compressors and sealed units are found in home appliances, such as fridges, washing machines, dishwashers as well as in cars and heavy industry equipment. They have various metal materials, copper in particular, and are suitable for recovery and recycling.
Copper Wire Scrap mill-berry We could supply the copper scrap with high quality and competitive price.� 1) Our copper scrap includes wires, tubes, and plates, etc. 2)The size is chips or other. 3) Copper content could� meet� customers need. Application: Electrical, light industry, machinery,national defense� industry� . Copper Scrap is industry a important sources of the raw materials,� all kinds of can be recycled Recycling waste production with copper
Item Value Place of Origin UK Brand Name Copper Wire Scrap Model Number CS11945 Type Copper Wire Copper Content 99% MOQ 100 Tons Appearance Red color Cu Content (%) 99.998% Purity High Purity
Drained Copper Compressor â?? Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Fridge/AC Compressor Scraps We sell Fridge/AC Compressor Scraps at a very competitive market price. We are trading in the finest quality Metal Scrap/ Aluminium Scrap, which are recycled for producing pure copper products and equipment.We offer quality AC and Fridge Compressor Scrap,Electric Motor scrap with 100% Copper Scrap,Starters, Alternators, Generators and other Motor scraps.
HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%
product origin : Middle East
Pig feed refers to the nutritional mixture of ingredients specifically formulated to provide essential nutrients to pigs raised for various purposes, such as meat production (pork) or in some cases, as pets or for agricultural work
Description by Manufacturer Chemical Composition: All Weight: 20/25kg per ingot Al (Min): 99.7%-99.9% Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of the ingot is clean and smooth.Applications:1. mainly used for melting ingot2. discontinuous melting with scrap3. easy control and operation4. fast melting5. Used for industry such as automobile,pinning and weaving,electron broadly and so onAl Content:99.7% minWeight: 20/25kg per ingot MOQ:1*20FCL( 25MT+-10% )Alloy Or Not:Non-alloy H.S.Code:7601101000
Specification item value Place of Origin â?¦.. Brand Name Ayo Chem Model Number ZHALOO476ZZA Type Zinc Ingot Zn (Min) 90% Powder Or Not Not Powder
Specification item value Grade 1000 Series Temper O-H112 Type Aluminum wafer Application Cookware Width Customer Requirement Surface Treatment Customized Alloy Or Not Is Alloy Place of Origin HEN Brand Name aluminum scrap Model Number aluminum scrap Tolerance �±1% Processing Service Welding, Cutting Delivery Time 22-30 days Product name Aluminum Flat Plate Aluminium Alloy Sheet Model Number 2024 Shape Square Keyword Aluminim Plate Material Aluminum Alloy Metal Color Customized Color Surface Polished MOQ 1 Ton Thickness 0.2-200mm Customized Standard ASTM AISI JIS DIN GB
Aluminum Ingot� is a piece of relatively pure material, usually metal, that is cast into a shape suitable for further processing. Ingots usually require a second procedure of shaping, such as cold/hot working, cutting, or milling to produce a useful final product. We supply high purity� Aluminum Ingots� originated from different part of the world. The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00 product name Aluminum Ingot material 6061,6065,7075 colour white shape rectangle Length * width * (model) specification of each commodity Can be customized characteristic hard
