The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Commodity: Aluminum Used Brewered Cans Origin:Thailand Specification: Aluminum Content 98% Min Si% 0.3 max Fe% 0.7 max Cu% 0.25 max Mn% 1.0-1.5 Mg% 0.8-1.3 Cr% 0.1 max Zn% 0.25 max Ti % 0.1 max Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. UBC suppliers are not allowed to use steel straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC briquette does not contain shredded material. Wooden pallets are not allowed to build the bundles. The briquette density is required to be in the range of 450kg/m3 to 700kg/m3 The preferred briquette size is: 0.40 x 0.30 x 0.30m and all briquettes should ideally be of uniform size. 24 bundles ( 1000 kg each)per container 40'HC Impurities:3% maximum as below: Moisture 0.7% Sand 0.6% Garbage 0.4% Paper & Vinyl 0.1% Ash 0.1% Magnetic Metals 0.5% Heavy Material 0.5% Dirt 0.1% Impurities 3.0% Non UBC target 3.0% If the impurities plus moisture is lower than 3%, there is no claim due to these non UBC. Radioactive source:None Fumigation Pallet a) Should be treated with Fumigation b) According to ISPM No.15(International standards for phytosanitary)
We are devoted to making sustainable improvement to offer superior quality products, satisfactory services uninterruptedly for the market and competitive price for the customer. We believe to make you satisfy, is our target forever. Under our efforts, we have already established good business relationship with some domestic and overseas. Our Goods remain free from Dust Particles, External Coatings, Oil or grease coatings and foreign contamination. We are capable to supply around 100 MT per week or as per buyers capacity. In very brief, our specialization and expertise lies in trading all kinds of ferrous and non ferrous scrap, specifically are as follows below: COPPER WIRE SCRAP 99.9 ALUMINUM EXTRUSION 6063 ALUMINUM UBC CAN SCRAP BOPP FILM (ROLL) SCRAP
ORIGIN: MALAYSIA LOAD PORT: KLANG GRADE: ISRI AS PER TALDON QUANTITY: 100 MT (+/- 10%) DESTINATION: ANY INDIA/PAKISTAN/BANGLADESH/TURKEY/EUROPE PRICE: $710/MT CFR CY PAYMENT: LC AT SIGHT 100% PACKING: 40' FCL SHIPPING: ANY SHIPPING LINE WEIGHT: 25 MT INSPECTION: AT SELLER COST DURATION: TBC SCHEDULE: LOADING TO BEGIN WITHIN 12-16 DAYS OF LC OPERATIVE
aluminum UBC scrap. Specifications Aluminum UBC Scrap 1. Item : aluminium scrap 2. Easy control and operation 3. Fast melting 4. Discontinuous melting with scrap 5. High efficiency 6. Stable working structure Origin: EUROPE,major from the UK, FINLAND .. Location: United Kingdom available stock:6,000mt Minimum Order: 25mt Packaging: According to isri Specification
Aluminum Extrusion Scrap Specification of Aluminum scrap 6063 Si: 0.2-0.6% , Fe: 0.35% , Cu: 0.1% , Mn: 0.1%, Mg: 0.45-0.9% , Cr: 0.1% , Zn: 0.1%
ALUMINUM WIRE SCRAP Specification of Aluminum scrap Si: 0.2-0.6% , Fe: 0.35% , Cu: 0.1% , Mn: 0.1%, Mg: 0.45-0.9% , Cr: 0.1% , Zn: 0.1%
Aluminum Ubc Scrap Specification of Aluminum scrap Si: 0.2-0.6% , Fe: 0.35% , Cu: 0.1% , Mn: 0.1%, Mg: 0.45-0.9% , Cr: 0.1% , Zn: 0.1%
Aluminium Ubc Can Scraps Quantity 2000mt monthly Minimum order 50mt Port ; Liverpool ports Packaging in bales Shipping Maersk Liners Delivery 21-29days
Aluminium extrusion Scrap 6063 Product availability from UK/UAE. Contact us for photos of scrap on the contact details below. MOQ: 100 MT can increase once relationship developed Terms: Ex-work or FOB UAE port PAYMENT: TT/SBLC before uplift of good from yard
Aluminium extrusion Scrap 6063
Aluminum Extrusion 6063 Scrap is characterized by its precise chemical composition, featuring a silicon content ranging from 0.2% to 0.6% and an iron content of up to 0.35%, adhering strictly to Alloy 6063 standards.
high-quality Aluminum Alloy Wheel Scrap. We can supply 700 tons of Aluminum Alloy Wheel Scrap to fulfill your requirements
We are offering Aluminum Wire Cable Scrap with a total quantity of 950 tons, ready for immediate shipment. The scrap is meticulously packed in bales to ensure easy handling and transportation. Our Aluminum Wire Cable Scrap contains 0.2-0.6% Silicon (Si), 0.35% Iron (Fe), 0.1% Copper (Cu), 0.1% Manganese (Mn), 0.45-0.9% Magnesium (Mg), 0.1% Chromium (Cr), and 0.1% Zinc (Zn). We offer highly competitive prices without compromising on quality.