Find Verified Industrial And Automotive Suppliers, Manufacturers and Wholesalers

EN590 10 PPM Diesel is a low-sulfur automotive diesel fuel designed to meet the requirements of the European diesel fuel specification EN 590, with sulfur content limited to a maximum of 10 mg/kg (10 ppm). It is suitable for modern diesel engines and is widely used for passenger vehicles, commercial vehicles, generators, agricultural machinery and industrial equipment.

Cetane Number : 51
Cetane Index : 46
Density at 15C : 820 - 845 kg/m
Flash Point : 55C
Water Content : 200 mg/kg

Ultra-low sulfur content of up to 10 ppm
Designed for modern diesel engines
Helps reduce sulfur-related emissions
Suitable for advanced emission-control systems
Good ignition characteristics with high cetane quality

Petroleum Lubricant Oil is a high-performance lubricant formulated from premium base oils and advanced additive packages to provide superior protection against wear, corrosion, oxidation, and thermal degradation. It is suitable for automotive engines, industrial machinery, hydraulic systems, compressors, gearboxes, and heavy-duty equipment.
Our lubricants are manufactured under strict quality control standards to ensure consistent performance, extended equipment life, reduced maintenance costs, and improved operational efficiency. Available in various viscosity grades and formulations to meet specific customer requirements and international standards.

Applications include automotive, marine, industrial, mining, construction, power generation, and manufacturing sectors.

LNG (Liquefied Natural Gas) is natural gas that has been cooled to approximately â??162�°C, reducing its volume substantially for efficient storage and transportation. It primarily consists of methane and is widely used for power generation, industrial heating, city gas distribution, marine fuel, and other energy applications. LNG is supplied in bulk under cryogenic conditions with specifications customized according to buyer requirements and destination-country regulations.

Sulfur : Very low
Water : Controlled to pipeline/LNG specification
Nitrogen : Contract/specification dependent
Heating value : Typically ~35 - 45 MJ/Nm
Density : Approx. 430 - 470 kg/m

High energy density compared with gaseous natural gas
Efficient for long-distance transportation
Lower sulfur and particulate emissions than many conventional fossil fuels
Suitable for large-scale industrial and power applications

LPG (Liquefied Petroleum Gas) is a clean-burning gaseous fuel stored and transported in liquefied form under pressure. It primarily consists of propane, butane or a mixture of both, depending on the grade and intended application.

Main Components : Propane / Butane
Physical State ; Liquefied gas under pressure
Appearance : Colorless
Odor : Odorized for leak detection where required
Propane Content : Grade dependent

High energy content
Clean-burning fuel compared with many conventional solid fuels
Easy to store and transport in liquefied form
Suitable for domestic and industrial applications
Rapid and controllable combustion

Crude Oil is an unrefined petroleum product extracted from underground reservoirs and used as the primary feedstock for producing fuels, lubricants, petrochemicals, plastics and other petroleum-based products. Crude oil is classified according to its API gravity, sulfur content, viscosity, density and overall quality.

Color : Brown to black
API Gravity : Approximately 20 - 45 API, depending on grade
Sulfur Content Low, medium or high sulfur depending on origin
Density : Typically 0.80 - 0.95 g/cm
Water & Sediment : As per contractual specification
Salt Content : As per refinery specification

Major feedstock for global petroleum refining
Available in light, medium and heavy grades
Can be selected according to refinery requirements
Suitable for fuel and petrochemical production
Supports large-volume industrial procurement

We supply rigorously inspected, wholesale used tires for international importers, distributors, and retreaders. Unlike standard bulk scrap shipments, every tire in our inventory is pressure-tested, graded, and organized to maximize retail turnaround and eliminate defective inventory.

Key Advantages: Meticulously matched by brand, model, and uniform tread wear to deliver high resale margins for retail tire shops

Strict Grading Standards:

Grade A: 5mm+ tread remaining, clean casings, no repairs or sidewall damage.

Grade B: 3mm to 5mm tread remaining, pressure-tested and structurally sound.

Commercial TBR: Virgin casings and regroovable options across steer, drive, and trailer patterns.

Efficient Container Packing: Custom packing options available (loose-loaded, doubled, or tripled) to optimize freight costs per unit.

Rapid Order Manifests: Sourcing and shipping price manifests provided with accurate lead times and documentation for customs clearance.

Contact & Inquiries:
Send your required size breakdown, target grades, and destination port to receive a comprehensive CIF/FOB quote.

We are a global supplier of premium and budget wholesale auto spare parts, bridging the gap between quality manufacturing and global demand. Sourced from certified OEM and reliable aftermarket manufacturers across Europe and Asia, our comprehensive catalog covers everything from engine components to complex electrical systems.

Whether you are supplying premium dealerships, independent workshops, or fleet operators, we offer flexible tiers of quality to fit your exact market requirements and price points.

Comprehensive Parts Categories
We supply a vast catalog of automotive parts in bulk to keep your supply chain fully stocked:

Engine Components: Pistons & Rings, Gaskets & Seals, Oil Pumps, Water Pumps, Turbochargers

Brake Systems: Brake Pads, Brake Discs, Calipers, ABS Sensors, Brake Lines

Suspension: Shock Absorbers, Struts, Control Arms, Ball Joints, Tie Rods

Electrical: Alternators, Starters, Sensors, Ignition Coils, ECUs

Cooling Systems: Radiators, Thermostats, Fan Motors, Coolant Pipes, Intercoolers

Filters: Oil, Air, Fuel, Cabin, and Transmission Filters

Available Premium Brands: Bosch, Mahle, Brembo, ZF, Valeo, Denso, and many more

Flexible Quality Tiers to Suit Your Market
We offer distinct quality levels to match your buyer demographics and warranty requirements (All factories are ISO/TS 16949 certified):

Genuine (OEM): Original manufacturer parts. 12â??24 months warranty. Ideal for dealerships and premium service centers. (MOQ: 50+ units)

OEM Equivalent: Produced in the same factory to identical specs. 12 months warranty. Perfect for independent workshops. (MOQ: 100+ units)

Aftermarket Premium: ISO-certified factory production. 6â??12 months warranty. Designed for fleet operators and cost-conscious buyers. (MOQ: 200+ units)

Aftermarket Economy: Standard specifications. 3â??6 months warranty. Best for repair shops and secondary markets. (MOQ: 500+ units)

Global Logistics & Shipping Built In
We donâ??t just distribute parts; we manage the freight. As a certified AEO logistics partner, we handle the entire supply chain from factory loading to destination port clearance.

FCL Shipping: Competitive pricing for 20ft and 40ft container loads directly to your nearest port.

Flexible Incoterms: EXW, FOB, CIF, or DDP available based on your operational needs.

Ready to stock your inventory? Contact us with your target region, required categories, and quality tiers to receive a custom price list and logistics quote. Our dedicated account managers respond within 24 hours.

Get high-performance premium wholesale tires for passenger and commercial vehicles. We supply top global brands like Michelin, Bridgestone, Continental, Pirelli, and more. We have both premium and budget brands available for instant export.

Magnesium Sulphate is a water-soluble inorganic salt containing magnesium (Mg) and sulphur (S). It is commonly supplied as magnesium sulphate heptahydrate (MgSO4.7H2O), also known as Epsom salt. The product is used as a magnesium and sulphur source in fertilizers, animal nutrition, chemical processing, and industrial applications.

Properties
Chemical Formula MgSO4.7H2O
Appearance White crystalline powder or granules
Magnesium Oxide (MgO) Approx. 16%
Magnesium (Mg) Approx. 9.8%
Sulphur (S) Approx. 13%
Purity 98-99%
Moisture Controlled
Solubility Fully soluble in water
pH (5% solution) Approx. 5-9

Aluminium Ingot A7 is a high-purity primary aluminium product with a minimum aluminium content of 99.70%, widely used in the automotive, construction, electrical, packaging, aerospace, and manufacturing industries. Manufactured according to international quality standards, the ingots offer excellent corrosion resistance, high conductivity, superior castability, and outstanding mechanical properties. The product is suitable for remelting, alloy production, extrusion, rolling mills, and various industrial applications.

Jet Fuel A1 is available through a direct mandate with a Kazakhstan refinery and title holder. The product is non-sanctioned and supplied in accordance with international aviation fuel specifications for commercial and private aviation use.

JET A-1 Aviation Turbine Fuel is a kerosene-type aviation fuel used primarily in commercial and military turbine-engine aircraft. It is formulated to provide reliable combustion, suitable low-temperature performance, thermal stability and controlled fuel quality for aviation applications.

JET A-1 is generally traded internationally according to recognized aviation-fuel specifications and requires strict quality control throughout production, storage, transportation and delivery.

Aromatics : Controlled according to applicable specification
Water Separation : Controlled according to aviation-fuel requirements
Thermal Stability : Compliant with applicable aviation specification
Electrical Conductivity : Controlled where required

Suitable for commercial turbine aircraft
Excellent low-temperature performance
High-quality controlled aviation fuel
Low freezing point suitable for high-altitude operation
Strictly controlled fuel cleanliness

Premium Inspected Used Tires -Grade A, Grade B & Heavy Duty (Wholesale)
We supply top-quality, fully inspected used tires for passenger vehicles, commercial fleets, and heavy-duty trucks. Sourced carefully and graded for transparency, our inventory features the world�¢??s leading tire brands to ensure safety, reliability, and excellent profit margins for wholesale distributors and global markets.

Whether you cater to premium retail markets or price-sensitive consumers, we have the right inventory to meet your demands.

Grade A Used Tires (Near-New Performance)
Our top-tier used tires feature minimal wear and excellent tread depth. These are highly sought after by demanding markets that require premium quality and maximum lifespan.

Tread Depth: 5mm to 8mm+

Condition: 100% free of repairs, patches, or sidewall damage.

Popular Sizes: 205/55R16, 225/45R17

Available Premium Brands: Michelin, Bridgestone, Continental, Goodyear, Pirelli, Hankook

Grade B Used Tires (Cost-Effective Reliability)
Ideal for wholesale distribution and price-sensitive markets, these tires offer moderate wear with uncompromising safety. Every tire is pressure-tested and structurally sound.

Tread Depth: 3mm to 5mm

Condition: Pressure tested, structurally sound, and thoroughly inspected.

Popular Sizes: 195/65R15, 205/60R16

Available Brands: Continental, Bridgestone, Michelin, Goodyear

Heavy Duty Used Truck Tires (TBR)
Built for commercial fleets, our high-quality used Truck, Bus, and Radial (TBR) tires are rigorously inspected for casing integrity. They are excellent for direct fleet use or professional retreading operations.

Tread Patterns: Steer, Drive, and Trailer available.

Condition: Virgin casings and regroovable options.

Popular Sizes: 315/80R22.5, 295/80R22.5

Available Brands: Michelin, Bridgestone, and many more.

Partner With Us
We specialize in fulfilling bulk orders for passenger and commercial fleets worldwide. Quality control is our priority every tire is visually and physically inspected before it leaves our facility.

Ready to order? Contact us today with your required sizes, grades, and volume to request a quotation.

Brass Cable Glands are mechanical cable-entry devices used to securely connect and protect electrical cables where they enter electrical enclosures, junction boxes, control panels, switchgear, motors and industrial equipment. They provide cable retention, strain relief, environmental sealing and protection against dust and moisture, depending on the gland design and IP rating.

They are manufactured from high-quality brass, nickel-plated brass or other specified materials and are available in multiple thread types, cable ranges and sealing configurations.

Jet A-1 is a standardized aviation turbine fuel (ATF) used to power most commercial and many military aircraft with jet engines worldwide.

Thermal stability : Controlled (JFTOT test required)

Physical & chemical specifications
Sulfur content : 10 mg/kg (10 ppm)
Cetane number : 51 (better ignition quality)
Density @ 15C : 820 - 845 kg/m
Viscosity @ 40C: 2.0 - 4.5 mms
Flash point : 55°C
Polycyclic aromatics: 8 - 11% (varies slightly by revision)
Water content : 200 mg/kg (typical limit)
Ash content : 0.01%

Sulfur available for lift-up from Tanzania. CFR terms are negotiable at the factory. The buyer should submit an LOI to request pricing. Deposit terms are subject to negotiation before SGS inspection.

Potassium Nitrate is a high-purity, fully water-soluble fertilizer containing nitrogen (N) and potassium (Kâ??O). It is widely used in modern agriculture due to its chloride-free composition and excellent solubility, making it suitable for sensitive crops, fertigation, greenhouse cultivation, and foliar application.

Parameter Typical Value
Chemical Formula KNO
Appearance White crystalline granules/powder
Total Nitrogen (N) 13.5-13.7%
Potassium Oxide (KO) 46.0-46.3%
Water Solubility 100%
Moisture 0.5%
Insoluble Matter 0.01%
Chloride (Cl) Low / chloride-free
pH (1% solution) Approx. 6-8

Calcium Nitrate Concentrated with Magnesium is a premium, fully water-soluble fertilizer formulated to provide crops with readily available calcium, magnesium, and nitrate nitrogen. It is designed for fertigation, hydroponics, foliar feeding, and open-field agriculture, where rapid nutrient uptake and high fertilizer efficiency are required.

Property Typical Value
Appearance White to grey-yellow granules
Total Nitrogen (N) 17.0%
Nitrate Nitrogen 16.7%
Ammonium Nitrogen 0.3% maximum
Calcium (as CaO) 32.0% minimum
Magnesium (as MgO) 1.0%
Water Solubility 100%
Insoluble Matter 0.1%
Moisture 3.0%
Friability 100%

Monoammonium Phosphate (MAP) Feed Grade is a highly purified inorganic phosphate used as a source of phosphorus and nitrogen in livestock and poultry feed. It is manufactured by reacting purified phosphoric acid with ammonia under controlled conditions to produce a free-flowing granular product with high bioavailability and low impurity levels. Feed-grade MAP is commonly incorporated into mineral premixes, complete feeds, concentrates, and nutritional supplements for cattle, poultry, swine, sheep, goats, and aquaculture.
Property Typical Value
Chemical Formula NHHPO
Appearance White to off-white granules
Phosphorus (P) Approximately 26%
Nitrogen (N) Approximately 10-11%
Moisture 3.0%
Bulk Density 900-1,100 kg/m³
Odor Odorless
Solubility Highly soluble in water

We provide consistent, reputable and resourceful company for the delivery of the following product specification.

Calcium Nitrate Concentrated is a high-purity, fully water-soluble inorganic fertilizer designed to provide plants with immediately available calcium and nitrate nitrogen. It is widely used in agriculture, horticulture, greenhouse production, hydroponics, and fertigation systems to improve crop growth, fruit quality, shelf life, and resistance to physiological disorders such as blossom-end rot and tip burn.

Parameter Typical Value
Total Nitrogen (N) 17.0%
Nitrate Nitrogen (NO-N) 16.7%
Ammonium Nitrogen (NH-N) 0.3%
Calcium (as CaO) 32.0%
Water Solubility 100%
Appearance White granules or prills
Moisture Low

We can assist in providing reliable seller for the following product below as described with specification to any world safe port !

Aviation Kerosene Colonial Grade JP54 is a kerosene-based aviation turbine fuel intended for gas-turbine-powered aircraft. In commercial commodity trading, although internationally recognized civil aviation fuel is typically marketed as Jet A-1 (ASTM D1655/DEF STAN 91-091), while the traditional CIS aviation fuel specification is TS-1 under GOST 10227.

Typical Technical Characteristics
Property Typical Value
Appearance Clear, bright, straw-colored liquid
Fuel Type Aviation Turbine Kerosene
Density @ 20C 0.775-0.840 kg/L
Flash Point Minimum 38C (Jet A-1) or 28C (TS-1, depending on specification)
Freeze Point Maximum -47C (Jet A-1) or -50C (TS-1)
Sulfur Content Maximum 0.20% by mass
Net Heat of Combustion Approximately 42.8 MJ/kg
Smoke Point Minimum 25 mm (typical export quality)

Gasoline is a refined petroleum fuel used primarily in spark-ignition internal combustion engines, such as those in most cars, motorcycles, lawn equipment, and small generators. It is produced by refining crude oil and blending hydrocarbons with additives to improve performance and reduce engine deposits.
Export fob and cif

Anhydrous Liquefied Ammonia Grade AK is a high-purity liquefied ammonia produced for industrial and agricultural applications. Under normal atmospheric conditions, ammonia is a colourless gas with a pungent odour; it is stored and transported as a liquefied gas under pressure. In Kazakhstan, Grade AK ammonia is manufactured in accordance with GOST 6221-90 for domestic use and export.

Typical Specifications
Property Typical Value
Standard GOST 6221-90
Grade AK
Chemical Formula NH
Purity (NH) 99.6%
Nitrogen Content 82%
Appearance Clear, colorless liquefied gas
Moisture 0.4%
Odor Sharp, characteristic ammonia odor

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.

Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.

We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.

The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.

Magnesium oxide, often referred to as magnesia, is a white, odorless, and alkaline solid with the chemical formula MgO. It is recognized for its diverse applications across industries. In healthcare, it is used as an antacid to relieve heartburn and indigestion, as well as a magnesium supplement. In the construction sector, magnesium oxide is utilized as a refractory material in kiln linings and as a fireproofing agent in building materials. It also plays a role in metallurgy as a refractory lining material for furnaces. Additionally, magnesium oxide finds application in the production of electrical insulators, as a catalyst in chemical processes, and as a stabilizer in some food products. Its ability to withstand high temperatures, neutralize acidity, and serve various functions highlights its importance in different industrial and consumer applications.

Optical brighteners, also known as fluorescent whitening agents (FWAs) or optical brightening agents (OBAs), are chemical compounds used in various industries, primarily in textiles, paper, and detergents. These substances absorb ultraviolet (UV) light and re-emit it as visible blue light, making colors and whites appear brighter and more vivid. Optical brighteners are often added to laundry detergents to give the illusion of cleaner and whiter clothing by enhancing their visual brightness. They are also used in the paper industry to improve the brightness and whiteness of paper products. Optical brighteners' ability to improve the appearance of materials under certain lighting conditions makes them valuable in enhancing the visual quality of a wide range of consumer and industrial products.

Sodium bicarbonate, commonly known as baking soda, is a versatile chemical compound with a wide range of practical applications. It is often used in cooking as a leavening agent, helping baked goods rise by releasing carbon dioxide when combined with acidic ingredients. Beyond the kitchen, sodium bicarbonate has various uses, including as an antacid to alleviate indigestion and heartburn, a cleaning agent to remove stains and odors, and a fire extinguisher due to its ability to release carbon dioxide, smothering flames. It also finds applications in personal care products, pharmaceuticals, and as a pH regulator in swimming pools and water treatment processes, making it a valuable and multipurpose chemical compound.

Sodium formate is a chemical compound with diverse applications in industries such as textiles, agriculture, and de-icing. It is commonly used as a reducing agent in the textile and leather industries during the dyeing and tanning processes, helping to achieve vibrant and lasting colors while also improving the softness and quality of materials. Additionally, sodium formate is utilized as a de-icing agent on roads and runways, effectively melting ice and snow due to its ability to lower the freezing point of water. Its versatility and effectiveness in various industrial contexts make sodium formate a valuable chemical compound with wide-ranging practical uses.

Sodium sulfide is a chemical compound known for its multiple industrial applications, primarily in the realm of metallurgy and the production of chemicals. It is a yellow to red solid or solution that serves as a powerful reducing agent, facilitating the removal of oxygen from various metal ores during ore processing, thereby aiding in the extraction of metals like copper, lead, and zinc. Sodium sulfide also plays a role in the leather industry for hair removal during leather processing and in the textile industry for dyeing and desulfurization. Additionally, it is used in wastewater treatment as a precipitating agent for heavy metals and in the production of various organic chemicals. Its versatility as a reducing and sulfur-bearing agent makes sodium sulfide crucial in multiple industrial processes.

Ethylene is a colorless and flammable gas with the chemical formula C2H4, representing one of the simplest hydrocarbon compounds with a double bond between carbon atoms. It is a natural plant hormone responsible for regulating various growth and developmental processes in plants, including ripening and flowering. Ethylene has significant industrial importance, as it is widely used in the production of plastics, particularly polyethylene, which is one of the most commonly used plastics worldwide. It also finds application in the chemical industry for the synthesis of various organic compounds. Ethylene's dual role in plant biology and industrial chemistry highlights its importance in both the natural world and human technology.

Formic acid, with the chemical formula HCOOH, is the simplest carboxylic acid and a colorless, pungent liquid with a sharp odor. It is naturally found in the venom of certain ants and serves as a key ingredient in stinging nettle plants. Formic acid is widely used in various industrial applications, including as a preservative and antibacterial agent in livestock feed, a coagulant in rubber production, and a powerful descaling agent for cleaning metal surfaces. It also plays a role in textile and leather processing, and as a basic building block in the synthesis of various organic chemicals. Its versatility and reactivity make formic acid a valuable compound with a range of practical uses in different industries.

Specification







Item

Value



Product name

Ethylene glycol



CAS No.

107-21-1



Other Names

2-Hydroxyethanol;Aliphatic diol;Athylenglykol;Dihydroxyethane;dowtherm;Dowtherm SR 1;dowthermsr1;ethane-1,



MF

C2H6O2



EINECS No.

203-473-3



Grade Standard

Industry Grade, , Reagent Grade



Purity

99, 99.9



Appearance

colorless liquid



Application

Widely used



Brand Name

Daxunte

Product:


Cocamidopropyl Betaine




Synonym:


Coco Betaine, CAB, CAPB



CAS No.

61789-40-0



Category:

Amphoteric Surfactant




Appearance:


Light yellow clear liquid



Actives:

30%, 35%, customization

1.Used directly to formulate detergents for household and industry use,used as raw material to produce kinds of detergent, emulsion.
2.Used as efficient emulsifying agent for polymerizing pressure sensitive adhesive. Dosage: 1â?¼0.1%
3.As the main content of highclass detergent and cleaner, it can blench, remove stains and oil and resist static electricity.
4.Used as the antistatic additive with cleaning function for textile oil.
5.Used as efficient antistatic agent for polyester substrate and film base, especially for polyester base cinefilm and filmstrip.Dosage: 0.5% or so.
6.Used as the antistatic agent for polyolefine, polyester and other polymer materials.
7.Used as the antihygroscopic and anticaking additives for powdered chemical products that are easy to absorb moisture andagglomerate.
8. Used as good degreasant for quality leathers.

Specification







Items

Type

Test Method



LAS-60

LAS-70

LAS-80

LAS-90



Active Matter , %

60�± 2

70�± 2

80�± 2

90�± 2

GB/T 5173-1995



Apparent Density, g/ml ( min)

0.18

0.18

0.18

0.18

GB/T 13173-2008



Water % (max)

5.0

5.0

5.0

3.0

GB/T 13173-2008



PH (25�°C, 1%aqueous solution)

7.0~10.5

7.0~10.5

7.0~10.5

7.0-10.5

GB/T 6368-1993



Appearance

white or light yellow powder

Aluminum Tripolyphosphate Quick Details

Product Name:� Aluminum Tripolyphosphate

CAS NO: 13939-25-8

Formula:� AlH2P3O10

Appearance: White Powder

Aluminum Tripolyphosphate Technical specifications:



Item
Unit
Specification


Whiteness
%
85-90


Al2O3
wt.%
10-20


P2O5
wt.%
30-40


Moisture
wt.%
Max1.5


Oil absorption
ml/100g
25-35


The PH Value
â??
6-7


Residue on sieve (800�¼m)%
wt.%
Max0.5

Sodium silicate is a clear, odourless, viscous liquid. It has a molar ratio of 3.27 and a total solids content of 36.8%. It is produced by fusing sand (SiO2) with sodium carbonate which produces solid glass (cullet). The glass is then dissolved in water and steam under high pressure which produces the sodium silicate solution also known as water glass. It is widely used in industry as sealants, binders, deflocculants, emulsifiers and buffers. It is commonly used to seal conrete and cement.

Product Name Phosphoric acid
Color White
Form Liquid
Technology Process Enzymatic hydrolysis
Smell With the product unique taste
Average Molecular Weight <1000Dal
Protein â?¥ 50%
OEM & ODM Acceptable
Shipment time 15 days
Payment TT
Package customized

Plaster Spreader and Wire Cutting Pliers (TC)

Capacity
(@30C,80%) 60L/D 70L/D 90L/D 120L/D 6.8KG/H 7KG/H 10KG/H 16KG/H 22KG/H 30KG/H 40KG/H
Airflow rate 480m3/h 500m3/h 1000m3/h 1300m3/h 1800m3/h 2000m3/h 2800m3/h 5000m3/h 5600m3/h 7400m3/h 10000m3/h
Power rating 780W 800W 1.3KW 1.68KW 2.5KW 2.8KW 4.2KW 6.3KW 8.4KW 12KW 15KW
Voltage 220V/50Hz 380V/50Hz
Applied temp 5 C-38 C
Filters G4 efficiency
Compressor LG Hitachi/Panasonic
Protection Delayed startup for protection
Body size(mm) 365*395*650 495*405*1000 600*410*1600
680*460*171
0
1030*510*1815 1080*530*2100
Package Carton+Plywood case Plywood case
Weight(kg) 50 55 90 100 80 85 110 210 230 270+ 300+
Warranty 1year(3years for compressor)
Lead time 7-20days

Full brochure available upon request.

FOB Port Klang
190kg Recon Metal Drum PFAD = USD 248/drum
(Approx. 99 drums per FCL)

Ethanol, also known as ethyl alcohol, is a clear, colorless, and flammable liquid with the chemical formula C2H5OH. It is one of the most widely used alcohol compounds and is found in alcoholic beverages such as beer, wine, and spirits. Ethanol has various industrial applications, including as a solvent in pharmaceuticals, cosmetics, and chemical manufacturing. It is also used as a biofuel additive, particularly in the production of ethanol-blended gasoline. Ethanol has a long history of human consumption for its psychoactive effects, and its production through fermentation of sugars from various sources makes it a key player in both recreational and industrial contexts.

Ethanol 99.9%. Medical Grade
in iron Drums 160 Kg , 202 Ltr
the stock Available now in Riyadh Saudi Arabia and Kingdom of Bahrain

USED RAILS

COMMODITY: USED RAILS
QUANTITY: Min 50,000 MT per month x 12 Months contract, above 1,000,000 MT per month
ORIGIN/LOADING PORT: Africa, Asia
PRICE: FOB/CIF prices available. Prices provided per current market conditions
TERMS OF PAYMENT: Irrevocable, non-transferable, 100% L/C, payable at loading port after inspection and shipping documents. TT, Bank Transfer depending upon supplier.

Specifications
Drained Copper Compressor â?? Fridges/AC RAINS per ISRI Specifications
Our copper content on
Monthly Supply Capacity
Type: Fridges, AC.
Packaging Detail:�  Wood Pallets According to ISRI Specification in Containers
Quantity: Between�  per month
Minimum Order acceptable

What do seal units look like? They are usually found in a heavy container that is typically made of steel and encases electric motors. Compressors and sealed units are found in home appliances, such as fridges, washing machines, dishwashers as well as in cars and heavy industry equipment. They have various metal materials, copper in particular, and are suitable for recovery and recycling.

Copper Wire Scrap mill-berry

We could supply the copper scrap with high quality and competitive price.� 
1) Our copper scrap includes wires, tubes, and plates, etc.
2)The size is chips or other.
3) Copper content could� meet� customers need.
Application:
Electrical, light industry, machinery,national defense� industry� .
Copper Scrap is industry a important sources of the raw materials,� all kinds of can be recycled Recycling waste production with copper

Item

value





68585-34-2



Other Names

Sodium Lauryl Ether Sulfate



MF

C16H35NaO5S



Place of Origin

China





70%



Appearance

White OR light yellow viscous paste



Usage

Cosmetic Raw Materials, Detergent Raw Materials, Hair Care Chemicals, Oral Care Chemicals



Brand Name

CX



Model Number

SLES 70%



active matter

70%



Unsulphated matter

â?¤2.5%



PH

7.0-9.5



H.S code

34021100

Product Specification






Product Name

96% Ethanol



CAS No.

64-17-5



EINECS No.

200-578-6



Place of Origin

Shandong China



Grade Standard

Reagent Grade



Purity

99.5%



Appearance

Colorless  liquid



Smell

Special fragrance



Application

Medicine, Coating, sanitary products, cosmetics, grease



Brand Name

HANBAI



Boiling Point:

78



Flash Point:

12



Density:

0.79g/cm3



Melting Point:

-114



Volatility

Volatile



Refractive Index(20)

1.361120



Saturated vapor pressure

5.33kP 19