TMI 45.17.8.200422 - Single Stack Coin Washer-Extractor Machine Product Description Adopt advanced inverter control system, save electricity consumption. It is available to adjust extracting speed to meet the different mate washing need. With memory function of running if the power is off suddenly. Low noise, low shock, drain at the back place, easy to control.
TMI 45.19.10.200422 - Gas Heating Industrial Drying Machine Product Description Newly developed energy saving industrial dryers. Easy to operate, wide drying application. High heating efficiency, convenient to use suitable for LPG or LNG. Low energy consumption, fast heat exchange and efficient heat energy application. Drum with well spread large punched holes which ensure sufficient hot airflow so that clothing is evenly dried. Big loading/ unloading door design to allow easy loading/unloading. Door rim is being designed so that clothing can be uploading from drum with ease. Equipped with safety door lock to prevent drum from rotating when loading door being opened. "Pull out" type of filter system which allow easy cleaning. It has powerful suction fan with large blade to facilitate good air flow and preventing ducting get stuck with dust and dirt. V-belt driven with speed reduction. Low noise level, low vibration, durable and easy to maintain. Micro-processor control system allows drying time and temperature setting using soft-touch key pad. The controller is well fitted to give good physical appearance.
TMI 45.50.2.200430 - Safety Cover With Bearings Accessory Machine Product Details Use: Food, industrial cleaning fluid recovery from water, oil removing machine. Short introduction: TMI 50.2.200430a Four bearing,stainless steel safety cover 90GB copper motor TMI 50.2.200430b Four bearings plastic safety cap 90GB copper moto TMI 50.2.200430c Two bearing stainless steel safety cover 90GB copper motor TMI 50.2.200430d Two bearings plastic safety cap 90GB copper motor TMI 50.2.200430e Four bearing stainless steel safety cover 90GB copper motor Loading and unloading material in both inside and outside the network
New Washing Machine
Product Description Dust Collector innovative concept is about filtering media which is placed on the two sides of filtering groove, and suction nozzles mounted on the suction arms which are then driven by patented mechanism revolves for intermittent dust collection. Its convincing advantages: compact, reliable, efficient & economical. â?? Working principle: Electrical unit consisted of the first-stage disc pre-filter and the second stage multiple round cage dust-filter. The first stage filter is used to extract, separate, collect the fibrous dust in the processing air; The second stage filter is used to filter out the fine dust from the air exhausted from the first stage filter.
Product Description Condenser is commonly used for the opening flow. Use blower and card pipe transmitting raw cotton or chemical fiber and the original cotton is condensed at the surface of dust cage with the suction of the blower and then stripped from it by beater, and go through the trash extraction of dust cage. Rich specifications for selection. Different power for different position in the flow. There are bypass devices at the top of this condenser and the raw cotton can be straightly transmitted to the next platform through this path. Technical Specifications Production kg/h: 800 Dust cage diameter mm: 500 Beater type: 6-Wing Blower diameter mm: 500 Blowing rate: Around 4500 General Power Kw: 4 Size (LxWxH) mm: 1721x800x1000 Machine weight kg: 600
Product Description The separator is used for cotton cleaning process and is directly installed in a conveying duct, which can detect and remove effectively the metal impurities and spark in textile fiber. It is an importance equipment for ensuring safety in production. Technical Specifications Power Source: AC220V 50HZ,60HZ Sensitivity: Spark-1mm,visual angle no less than 90 metal-no less than 2mm steel ball Response time: Millisecond level Cotton speed range in conveying duct: 5-18m/sec Dia. Of conveying duct: 300 mm
Product Description Chute feeder has a good effect on open & low fiber damages. Two feed rollers feed materials to prevent from warping. The feed rollers controlled by inverter. It is mounted with protection unit. The space between feed rollers and feed rollers/open roller is adjustable. The vibrant favourable for forming even and uniformity fiber batt. The output roller draft for improving sliver evenness. The sliver evenness is improved. Technical Specifications Suitable fiber: All synthetic and mixed fibers which are less than 76mm Working width (mm): 950 Production (kg/h): 100 Diameter of feed roller (mm): 120 Diameter of opening roller (mm): 266 Blower speed (rpm): 2840 Air displacement: 600m3/h -500pa Installed power (Kw): 2.85 Overall dimension (Wx Lx H) (mm): 1614 x 600 x 2800 Net weight (kg): 1400â??
As Per Client Requirement Of Vessel Design Requirement. We Can Carry Detailed Design And Fabrication As Per Requirement. With Heating, Cooling /heating Cooling Coils For Thermic Fluid /steam /electric, Agitators For Mixing, Safety Devices Like Pressure Relief Valves/measurement, Instrumentation For Measurement/ Structure Design., Etc. Also Can Be Supplied As A Complete Skid Kettles -non Pressursed Vessel Moc : Cs /cs Epoxy Lined / Ss / Alloy Steel.
Pro Supreme Trolley Suitable for All Types of Fully Automatic WM upto 7kg Min Size-17 17 / Max Size -24 24 Semi-Automatic WM Min Size -16-27 / Max Size -21-33 Suitable for all types of Semi-Automatic WM upto 7kg
Line composition: - Ingredient mixer HOSOKAWA SINGLE COOLMIX 200E - Lungs HOSOKAWA TBT 100 - Cooking zone HOSOKAWA SINGLE ROTORCOOKER SUPER - Essence deposit HOSOKAWA DOSSING UNIT - Head HOSOKAWA 6B1290 - 2 Candy wrapping machines THEEGARTEN PACTEC-2004 and 2007 Description: Casting machine according to the "endless chain" principle. Single belt installation with continuous transport chain. The molds are vertically guided, placed freely on supports in horizontal transport. Filling of molds or cavities with dough, made with 1 pour per mold in mono products and 2 pours per mold in One-Shot products
INJECTION UNIT Injection capacity - 160 Max. injection speed (mm/s) - 126 Max. screw speed (r/mm) - 263 CLAMPING UNIT Clamping force (KN) - 700 Opening stroke (mm) - 320 Space between tie bars (mm x mm) - 360 x 360 Min. mould height (T-slot) (mm) - 140 (105) Max. mould height (T-slot) (mm) - 340 (305) Max. distance Platen (T-slot) (mm) - 660 (625) Ejector stroke (mm) - 70 Ejector force forward (kN) - 31 Ejector force backard (kN) - 20 Number of ejector rods (PC) - 5 POWER ELECTRIC Sys. Pressure (MPa) - 16 Pump Motor (kW) - 9 Heater power (kW) - 5.4 Number of temp. Control zones - 3+1 OTHER Hopper capacity (kg) - 25 Oil tank capacity (L) - 120 Macine dimensioni (LxWxH) (m x m x m) - 3.5 x 1.15 x 1.7 Machine weight (Ton) - 2.4
Ore concentrates and minerals, semi precious metals, oil products, fertilizers, f&b items, light & heavy industrial equipment, urea granular 46b, vietnamese jasmine rice, sulphur, sugar.Import/export, trade facilitation, distribution, recycling & recovery of metals
Industrial machinery, metal products.
Industrial Equipment, Engineering Components.
Industrial machinery and agricultural products.
Sewage treatment plants, effluent treatment plants.
Technical aerosols, automotive, industrial machines, marine.
Refurbished /new paper converting machines .tissue paper machines, packing machines, paper cup making machines and all relates spares .Manufacture and exporter
Industrial machine used and new.
