Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
Our company is a reliable supplier of cable and wire products, our specialists will always help you choose a cable or wire of good, namely the best quality, we work with the most famous and high-quality brands of Ukraine and not only, our company is ready to supply you following listed copper and aluminum cable, as: I. Power cables: NYY; NAYY; NYBY/NYRY; NAYBY/NAYRY; N2XY; N2XH; 2XBY/N2XRY; NA2XBY/NA2XRY; NA2XY. II. Building wire: NYM. III. Flexible cables: H05V-K; H07V-U; H07V-K; H05Z-K; H07Z-K; H07Z-U; H07Z-R; H03VV-F/H05VV-F; H03VH-H; H07RN-F; H01N2-D. IV. Control cables: NYY control cables; YSLY. V. Fire resistant power cable: (N)HXH-J FE180/E30; (N)HXH-J FE180/E90. VI. Bare copper strand: Bare copper strand VII. Overhead line: AsXSn Any volume, certified documentation, product labeling, correct packaging, we can do all this, we are waiting for your applications and look forward to long-term cooperation.
Hydraulic turbines.
Steam turbines.
Gas turbines.
Our product can be used in food industry/industrial food makers/indusrtial kitchens/etc. We propose high quality product and competitive prices! We use an individual approach, therefore in each case we make a calculation of the cost of production. We are ready to make calculations, samples, and series of orders for you. Let`s improve youre business with us! We will be happy to answer on all your questions! For more information follow: https://alliancesteel.com.ua/en/ https://www.instagram.com/alliance.steel/
LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch. LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output. The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate. A load matching is made automatically. Main parameters, such as output power, load impedance, selected frequency are shown on OLED display. If a load is higher than 1000 Ω LFG50 automatically switches into output voltage setting mode. The output overload protection will trip, when operating on short-circuit loops (lower than 0.5 Ω). MAIN FEATURES: Portable and lightweight Moistureproof and dustproof case Advanced LiFePO4 internal battery with fast charging option High-contrast graphic OLED display Multifrequency operation Operating frequencies can be changed upon request Internal transmission loop antenna Automatic load impedance matching Ability to work with energized 0.4kV cables (inductive connection) Overload protection Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.
Own production, capacity up to 50kg/h, is mainly designed for processing hard vegetables and fruits.Voltage is 220V, the number of revolutions to 3000 rpm.
The outdoor wood stove "Baker" works on firewood, briquettes, charcoal under any weather conditions. The Baker pizza oven can be quickly and easily placed anywhere in the city, in a crowded place, you can set up a restaurant on wheels and sell very tasty wood-fired products to visitors. Food preparation time in a this oven is only 5 minutes. With our signature recipes and cast iron cookware, you will be able to prepare a wide variety of delicious dishes: meat, fish, porridge, soups, baked goods and much more. Portable. Fits in the trunk of a car. Assembled dimensions (H * W * D): 600mm * 500mm * 550mm Weight: 60 kg The set includes: stove, chimney, thermometer, chamotte tile, stand, instructions, warranty card.
Specifications: Model: GP-AWC01 Input: 9V/2A 9V/2.7A or 12V/2A Output: 15W/10W/7.5W/5W (Phone) 2.5W (Apple Watch SI, S2, S3, S4, S6) 5.0W (Phone orTWS Earphone: Apple AirPods 2, Pro; Input Interface: Type-C port Transmission Distance (Phone):
Port C C1/2 output: 5V3A, 9V3A ,12V3A, 15V/3A, 20V3.25A A output: 5V3A, 9V2A , 12V1.5A Type C1: 5V3A, 9V3A ,12V3A, 15V/3A, 20V2.25A Type C2/A: 5V3A, 9V2A ,12V1.5A (C2/A Share 5V3.6A) Watt 65W
PD 22.5W(compatible with QC3.0)Type-C bidirectional fast charging Capacity: 30000 mah Size: 142 66 39 mm Material: ABS+ aluminum alloy Micro input : 5V2A 9V2A 12V1. 5A ;Type - C input: 5V3A 9V2A 12V1. 5A ; Type - C output : 5 V/3A 9V2A 12V1. 6A ; USB OUTPUT: 4. 5V5A 5V3A 9V2A 12V1 5A Color: retro green, cool black, red, royal blue
