Iron ore is used to smelt cast iron, steel cast iron and steel. However, before iron ore is used for its intended purpose, it undergoes enrichment at mining and processing plants.
Steel billet, hrc, slabs, etc anthracite coal..
Iron scrap, stainless steel scrap.
Microsphere, basalt, fly ash, iron ore, rice husk ash.
Sugar, wheat flour, milling wheat, corn oil, sunflower oil, frozen chicken, date, sesame seeds, cement, iron, copper, plastic.
Kaolin, Zircon Sand/Silicate, Rutile, Ilmenite, Kyanite, Airon Oxide.
«contrrust» is environmentally-friendly rust converter based on natural products and water . It converts rust into bluish-black, protective, natural polymer which stops further rusting and also can be used as primer. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. Key advantages: - “green” product, not toxic, not polluting - no mineral acids, no damage to surface - no need for additional surface preparation and after-treatment - work in hardly accessible places - no additional equipment is needed - life time of the steel is 6-12 times longer compared to using competitive remedies. Application areas Industrial fabrication Machinery & equipment manufacturing Building construction Ports & docks Shipping industry Automobile industry Locomotive and railways Installation of petroleum and petrochemical industries Oil & natural gas installations Spreading rate: 60-200 g/m2 (depending on thickness of rust layer) 5, 20, 50, 100 or 1000 liters container.
Refined Sunflower oil, Crude Sunflower oil, Vegetable oil, Extra Virgin olive oil, Refined corn oil, Refined soyabean oil, Crude soybean oil, Rbd palm oil, Refined canola oil, degummed rapeseed oil, Peanut oil, Mixed oil, used cooking oil & crude jatropha oil.
Silicomanganese (Simn65%) size: 10-80 mm Quality indexes: Si 17.2%; Mn 65.3%; C 2.4%; P 0.35%; S 0.02% Lumps use: Ferrosilicomanganese MnS17P35 for the metallurgical industry. Ferrosilicomanganese MnS17P35 is a brittle alloy of iron, silicon and manganese, which is widely used in the metallurgical industry to deoxidize steel. Ferrosilicomanganese gives the alloy shock resistance and brittleness in bending. Quantity available per month: 300t Packing: big bags
Ferromanganese HC size: 10-80 mm Quality indexes: Mn 75-82%; C 7%; Si 1%; P 0.2%; S 0.02% Lumps use: Ferromanganese HC for the metallurgical and foundry industry. Ferromanganese HC its a manganese and iron alloy, which is widely used for deoxidation and alloying of steel in the metallurgical and foundry industries. Ferromanganese HC increases hardness of the steel, anti-corrosion properties and rupture resistance. Quantity available per month: 250t Packing: big bags
Ferrosilicon FS10 Lumps dimentions: 0-800 mm Quality indexes: Fe (75-88), Si (8-12.5), Al (0.5-2.0), C(0.4-2.0), Ti(0.3-3.5), S(0.08-0.25), Cu(0.03); Lumps use: Ferrosilicon FS10 for the foundry and engineering industry. Ferrosilicon FS10 is a ferroalloy, the main components of which are metals such as iron and silicon. Ferrosilicon is used as a deoxidizing and alloying additives for the smelting of electrotechnical, spring, corrosion and heat-resistant steels. Quantity available : 2500t Packing: big bags
We offer liquid organic and mineral-organic fertilizers depending on your needs. Intended for soil nutrition and sub-root, extra-root feeding of cereals, legumes, all fruit and vegetable crops, trees, plants, flowers throughout their entire development cycle. The main advantages of use: - 1 ton of biofertilizers is enough for 50 ha; - The content of humic acids in biofertilizers in dry matter ranges from 13% to 28%; - Acceleration of plant growth and development, shortening of the growing season, earlier ripening by 8-10 days; - Increase in the yield of agricultural crops by 20 - 40%; - Increasing the resistance of plants to adverse environmental conditions: drought, high and low temperatures, toxic substances such as pesticides, herbicides, heavy metals. Composition of biofertilizers: Total nitrogen - 5.57%, incl. ammonium nitrogen - 0.8%; Phosphorus - 2.57% ; Potassium - 6.9% ; Copper - 3.2 mg/l ; Zinc - 3.63 mg/l ; Manganese - 6.6 mg/l; Cobalt - 0.03 mg/l ; Iron - 20.66 mg/l. The cost of mineral biofertilizers depends on the composition and volume of fertilizers. Each batch has a Certificate of Conformity.
Refined deodorized winterized Sunflower Oil 1l bottle - 2,25 ERU DAP, EU., 5l bottle - 10,82 ERU DAP, EU. Product origin - Ukraine Manufacturer certificates , ISO 22000, ISO 9001 Color: clear Flavor: flavorless Color value, mg iodine: 2 Acid number, mg KOH / q: 0.11 Phosphorus-containing substances, %: none Non-oil admixtures, %: none Moisture and volatile substances, %: max 0,10 Freezing test: passing the test Peroxide number, O mmole/kg: 0,45 Unsoaponifiables, g/kg: none Energy: 899kcal Fat: 99,9g Arsenic, mg/kg
Llc simurgh trade incorporation offers to supply refined sunflower oil, frosted(press), grade "p", packed in a pet bottle of 1, 5, 10 liters. All our products comply with state and international standards like as iso, dsut, phitosanatory, haccp, kosher. Destination: for any safe port Payment term: 100 % advance payment, l/c at sight , other due to contract conditions Vilume ability: 3000 mt per month Information about product: Processing type: refined Use: cooking Packaging: pet bottle, in a client request Volume: 1, 5 and 10 Place of origin: ukraine Average nutrient per 100 ml of oil Physical propertice Appearance: golden yellow liquid oil at ambient. No residue at 40 deg. C Color test: max 1, 2 red Refractive index: 1.465 - 1.475 at 40 deg. C Destiny: 0, 91- 0, 92 g/cm3 at 20 deg. C Volatile matter: max 0, 07 % at 105 deg. C Taste and odor: excellent and not sensed Chemical specification % free fatty acid: max 0, 1 % ash: max 0, 05 Saponification value: 190:32 log/g. Of oil Iodine value: 134:14 Peroxide: 0, 2 meg/kg of oil % soap: 0, 0005 % unsaponifiable matter: max 0, 12 Impuritier: none % saturated fat: 8-12 % unsaturated fat: 87- 94 Energy: 3389 Protein: none % moisture < 0, 05 Dietary fiber (mg): none Cholesterol (mg) none - method aoac 991:43 Iron< 0, 02 Gmo: free
Our company offers to supply butter natural with a fat content of 82.5%, production of Ukraine. Butter meets all international quality standards, as evidenced by the relevant certificates. Shelf life of butter is 12 months from the date of production. Name of the product: sweet cream butter extra The name of the standard: DSTU 4399:2005 "Sweet cream butter. General specifications." Ingredients: Pasteurized cows milk cream. Organoleptic characteristics: Product view: Surface on the cut is shining, or slightly shiny, dry in appearance. Physical and chemical characteristics: Mass fraction of fat, %: from 80 to 85 Titrated plasma acid, 23 6,25 Ð�umidity: 16 Fat phase acidity, 2,5 Microbiological characteristics: The total bacterial count, g: not more than 1,0x105 Coliforms in 0,01g: not allowed Staphylococcus aureus, is not allowed in, 1,0g: 1,0 Yeast, total bacterial count in 1,0 and Moulds total bacterial count in 1,0: not more than 100 in total Salmonella in 25g and Listeria monocytogenes in 25g: not allowed Security indicators Toxic elements, mg / kg: Mass fraction of lead, not more than, mg / kg: 0,1 Mass fraction of cadmium, not more than, mg / kg: 0,03 Mass fraction of arsenic, not more than, mg / kg: 0,1 Mass fraction of mercury, not more than, mg / kg: 0,03 Mass fraction of copper, not more than, mg / kg: 0,4 Mass fraction of zinc, not more than, mg / kg: 5,0 Mass fraction of iron, not more than, mg / kg: 1,5 Pesticides, mg/kg: GKhTsG (gamma-isomer), not more than, mg / kg: 1,2 4,4 â?? DDT, not more than, mg / kg: 1,0 Mycotoxins, mg/kg: Aflatoxins 1, not more than, mg / kg: 0,001 Aflatoxins Ð?1, not more than, mg / kg: 0,0005 Radionuclides, Bq/kg: Content of radionuclides Cs-137, not more than: 100 Content of radionuclides Sr-90, not more than: 20 Antibiotics, u/g: Tetracycline group u/g, not more than: < 0,01 Streptomycin u/g, not more than: < 0,5 Penicillin u/g, not more than: < 0,01 Butter 82.5% is packed in a cardboard box weighing 20 kg. A 40-foot refrigeration container holds 1200 boxes of butter 82.5%. Pallets are not used. The total cost of one container of butter 82.5% is $144 288,00, EXW, Burin, Ukraine. The cost of a ton of butter 82.5% is 82.5% is $6012,00, EXW, Burin, Ukraine. The cost of one kilogram of butter 82.5% is $6,01, EXW, Burin, Ukraine. The minimum order starts from 1 container. With the hope with mutually beneficial cooperation
Granular coal slag is actively used as a filler in the manufacture of concrete. This type of concrete is used in unsuitable structures. In particular, for the construction of slag concrete wall blocks, monolith walls in low-rise buildings, and gypsum concrete partition slabs.
Rice husk ash is used in the production of special high-quality steel with low thermal conductivity and density. ZRSH is added to the heat-insulating mixture to cover the mirror of the metallurgical ladle, which additionally ensures compliance with the temperature regime of continuous casting processes. Ash is used as a filler in polymers and rubbers for the production of car tires, as an adsorbent for heavy metals for wastewater treatment. In the pharmaceutical industry, ash is added to stabilize emulsions, as an agent, thickener and suspending gel in the preparation of semi-solid products, in perfumery, RHA is added as a filler for toothpastes and creams. Equally important is the use of rice husk ash as a natural source of high performance amorphous silica.
As a dense and hard material, dolomite is widely in demand in construction - in finishing works and for the construction of low-rise buildings. Also, the mineral is an important element of the refractory treatment of blast furnaces for steel processing and is used as a flux for melting iron materials. In addition to the above, dolomite: used as raw material for ceramics, glass, cement, fertilizers; used in the production of pesticides, paints; is the basis for creating decorative and building stones; acts as a filler in the production of asphalt, concrete blocks, etc. A large amount of powdered dolomite (dolomite flour) is actively used in the creation of float glass. Limestone material is also added to the soil to reduce acidity and "sweeten" the land. This special material plays an important role in a variety of components used to manufacture residential and commercial construction products: plasters (including waterproof); mastics; roofing systems; construction connections; marble and polymers; concrete blocks; floor coverings - composite vinyl tiles, etc.
Oil and gas industry: Accelerating the process and improving the efficiency of well drilling; increasing the life of drilling equipment; drilling fluids and plug cements of low density and high strength. Construction: ultralight and ultra-lightweight concrete; high-strength and low-density thermal and acoustic insulation boards; increased adhesion of concrete or brick walls, excellent leveler. dry mortars, lime and liquid mortars, cements, plaster, insulating roof coatings and soundproofing materials - lightweight, smooth surface, low cost, heat resistant, shrinkage resistant. sensitizer for the use of emulsion BBs. paints - resistance to chemical corrosion and light, thermal insulation, smoothness. Styrofoam: Aircraft, spacecraft, ship construction - low density and moisture absorption, high mechanical properties of materials for vibration damping, insulation and thermal protection. Ceramics: Refractory materials and coatings, insulation materials. Plastics Epoxy resins: production of polyethylene - improving strength and abrasion resistance. production of bearings, cameras, furniture and its accessories - tensile strength, impact strength, hardness, resistance to heat and light. Profiled materials, pipes, plates - dimensional stability, rigidity, heat resistance; TV housings, auto parts - compressive strength, bending elasticity, shrinkage reduction.
Fly ash is used: In the production of lightweight concrete. Low-cement concrete is used in the preparation of road bases. Fly ash is also used in slag-silicate concretes, which are used to repair roads, airfields, bridges, as well as in the construction of acid-resistant floors in chemical plants, livestock farms, and metallurgical facilities. In the production of foam concrete, its introduction into the foam concrete mixture increases the aggregate stability of the mixture between the beginning and end of the cement dough setting, which prevents the movement of components and prevents negative effects on the formation of the structure. Fly ash easily replaces cement in the production of mortars, ready-mixed concrete, and finished products. It is used as an additive to cement without reducing its activity, is used in the preparation of concrete for road construction, and as an additive to clay in the manufacture of tiles and bricks. As a component of dry construction mixes: production of dry masonry mixes consisting of cement, sand, fly ash, ICP, and powdered superplasticizer.
