CT and MRI scanners and parts.
Cranck shears with inclined throat. Suitable to work in high/low temperature environment. Drilling rig, centering skids.Manufacture, repair all types of metal working equipment
Electronic cash registers, fiscal devices, POS printers and peripherals..Software developer.
Cash registers, portable thermal printers, mobile payment terminals, fiscal printers, taximeters.
Mobile payment terminals, cash registers, fiscal printers, POS terminals, smart modems for data transmission, thermal printers, electronic scales and taximeters.
Anodized aluminum plates, name plates, industrial plates, barcode labels, precise scales, mimic panels, vehicle tags, control panels.Shipping, customs clearance
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
Physical and chemical characteristics of naphthalene are mentioned below: Temperature of crystallization 78.6 c min Mass share of ash 0, 01 % max Mass share of sulfur 0, 3 % max Mass share of water 0, 1 % max External looking: solid product like a tablet (weight is not exceeding till 50 kg) Colour: from light gray to gray Place of origin Russia 25-50 bags
The scope of activity of our company is the production of premium class charcoal (up to 270t / month). Charcoal is produced from hard oak, hornbeam, ash. You can also buy charcoal from apple and pear wood from us. Charcoal from apples and pears gives food a subtle, exquisite aroma of fruit trees. Special patented production technologies allow charcoal to be pierced at temperatures of 450-550 C. It is considered the most suitable for most areas of coal consumption. The non-volatile carbon content is 93%. We offer packing in our bags of various capacities, or in yours with your company logo. The activity of our company is based on the exchange of information and the individual responsibility of each specialist for the tasks assigned to him. Cooperating with SV-Synergy, you are guaranteed to receive quality products at the best price and a reliable partner in the person of our company.
Pressure-Volume and Flow-Volume, displayed waveforms can be cycled instantly with a touch of a button 3.Standard integrated metallic modular respiratory circuit; completely solves the problem of gas sealing under high temperature disinfection, easy to clean and disinfect 4.Power Failure Support Functions: Automatically converts to backup power mode during AC power outages 5.Equipped with electronic pressure differential flow sensor, imported respiratory control valve, stable and reliable, rapid response time 6.High precision five tube flowmeter, fitted with interlocking oxygen-nitrous oxide supply, guarantees oxygen output is never lower than 21% 7.Nonhazardous environmentally friendly frame, precise construction, elegant design, equipped with automated self-checking function during startup and an automatic self-calibrating sensor 8.Alarms: Audible and/or visual alarms for tidal volume, airway pressure, oxygen concentration, asphyxia, power failure, oxygen failure and other alarms, also features a alarm query function 9.Vaporizer: Imported tank components assembled locally; Enflurane, Isoflurane and Sevoflurane (Halothane optional). Also possesses self-compensating functionality 10.Advanced and stable Adjustable Pressure Limiting (APL) valve, suitable for low and ultra low flow anesthesia 11.Equipped with advanced international rotating Na-lime tank, easy-operate, requires only one hand, and uses imported PPSU material and temperature resistant to 134�°C 12. Multi-parameter Patient Monitor: Optional
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers. Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows. The heating system is FANCOIL heaters connected to classical heating system. Basic equipment convectors as follows: • box (making possible options: fiberglass, metal powder-coated); • copper-aluminum heat exchanger; • flexible connection hoses with shut-off valves; • tangential fans (in models with forced convection) Optional equipment: • oak grill or duralumin (different colors, roll or longitudinal) • Electronic room thermostat; • converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300); • converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120); • smooth speed control of fans. Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting. Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors: • box of fiberglass-50 years • box with powder coating 10 years • wooden box (floor) - 2 years • copper-aluminum heat exchanger 10 years • aluminum grille-5 years • wooden lattice - 1 year • electrical parts - 5 years • valves - 1 year Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter. 9kg for 1 m.P sizes upon request
Luxury quilts are made of high quality satin or calico filled with 100% natural wool. - non-allergic and hygroscopic - maintains the optimal temperature, - is very light but the most warm - the best choise for winter Has many curative effects on human body because of lanolin - element contained in sheep's wool, - stimulate blood circulation, - help to reduce backaches, joint and muscle pain. - has beneficial effects on the human body in case of osteochondrosis, orthopedic and rheumatic diseases - prevents skin aging. Our services The material, filling weight, size can be made according to customers requirement Can produce blanckets for your brend Quilting services Summer quilt: 250g/m2; winter quilt: 400g/m2 or more Material Percale, microfiber, satin or customized Filling Wool/hollowfiber/cotton/ polyester/ bamboo Vacuum packing avaliable, supper press packing avaliable. 2. Standard export packing, with pvc or pe bag, or simple plastic packing, load in carton 3. Carton label / trade mark printing service avaliabe. 4. Insert card, hang tag, wash label, corner tag, trade mark service avaliable
The charcoal kiln UMT-3 The charcoal kiln UMT-3 has all the unique qualities installations series "UMT". But in this model we have provided not only enhanced protection from the so-called "human factor", but also we have developed an automatic protection that works completely offline. It allows to reduce in several times the risk of equipment damage from negligence of employees and increase productivity by 10-15% . Now the minimum capacity of this charcoal kiln is 35 tons per month using wet wood till 50 tons per month using dry wood. Also its possible to burn all kinds of fuel briquettes such as "Pini Key" and "Nestro" into charcoal briquettes The productivity of the briquette is 100-120 tons / month 1.Improved installation design. 2.Increased productivity from 35 tons per moth for charcoal and 100-120 tons per month per briquettes 3.Automatic protection from extreme temperatures, works completely offline. 4.The high quantitative and qualitative characteristics of charcoal and briquette. The ratio of wood to charcoal is 5.1m3 per 1 ton of charcoal 5.Low operating costs. The equipment serves one person whether it is a single installation, two or three. 6.Works on its own gas. Power consumption is 20 W/hour, 24V/hour 7.Quick and easy unloading of finished products and loading of raw materials in the retort - up to 5 minutes 8. Mobility. Charcoal kilns can be moved if its necessary. 9.Work without repairs. We give a guarantee for two years 10.Environmental cleanliness. No emissions into the atmosphere either before or after or during the production process 11.Extended range of plug-ins for the selection of excess heat - a wood drying, hot water boilers, waste incineration. 12.Low cost of equipment. Taking into account the calculation of the cost of a ton of charcoal produced per year, the price of charcoal kiln is the lowest in the world market. Two years of operation have confirmed the reliability of our equipment Parameters Width -depth ?height 5680x2600x2690 mm Weight 8500 kg Productivity 30-55 tons per month Guarantee 24 months Terms of manufacturing 45 workdays
Energy value per 100 g (g) of food: 243 kJ (kJ) / 57 kcal (kcal), nutrient content per 100 g (g) of food: protein 1.8 g (g); carbohydrates 13.1 g (g). Recommended by the manufacturer conditions and shelf life of the product: at a temperature of 0 C to + 6 C for 14 days.
Key features of the production line: Apart of short cut pasta it is possible to produce potato pellets on the same line Automatic batching system of raw materials is foreseen; Machinery provides homogeneity of mixing of components; High quality of the product due to mixing and pressing is made in vacuum conditions Press is completely automatic; Flexible system for the adjustment of product dimensions is foreseen; Humidity and temperature in the dryer are maintained automatically; Different recipe can be use; Design of lines can be developed according to customerâ??s production premises. Equipment set of the line: - Bag tilting device; - Flour sifter-batcher; - Press - Trabatto - Elevator - Drying chamber - Cooling chamber - Elevator - Storage-hoppers. Capacity: 250 2000 kg/h Thickness of product: 0,9-1,1 mm Raw materials: flour, semolina Energy source: liquid fuel, solid fuel, electricity, gas All components contacting with product are made of stainless steel AISI 304 Heat insulation is made of special polyurethane sandwich panels Drives and components are made in Europe Control system is carried out with controller and TOUCHSCREEN
Key features of the production line: Apart of short cut pasta it is possible to produce potato pellets on the same line Automatic batching system of raw materials is foreseen; Machinery provides homogeneity of mixing of components; High quality of the product due to mixing and pressing is made in vacuum conditions Press is completely automatic; Flexible system for the adjustment of product dimensions is foreseen; Humidity and temperature in the dryer are maintained automatically; Different recipe can be use; Design of lines can be developed according to customerâ??s production premises. Equipment set of the line: - Bag tilting device; - Flour sifter-batcher; - Press - Trabatto - Elevator - Drying chamber - Cooling chamber - Elevator - Storage-hoppers. Capacity: 2502000 kg/h Thickness of product: 0,9-1,1 mm Raw materials: flour, semolina Energy source: liquid fuel, solid fuel, electricity, gas All components contacting with product are made of stainless steel AISI 304 Heat insulation is made of special polyurethane sandwich panels Drives and components are made in Europe Control system is carried out with controller and TOUCHSCREEN
Key features of the production line: Apart of short cut pasta it is possible to produce potato pellets on the same line Automatic batching system of raw materials is foreseen; Machinery provides homogeneity of mixing of components; High quality of the product due to mixing and pressing is made in vacuum conditions Press is completely automatic; Flexible system for the adjustment of product dimensions is foreseen; Humidity and temperature in the dryer are maintained automatically; Different recipe can be use; Design of lines can be developed according to customerâ??s production premises. Equipment set of the line: - Bag tilting device; - Flour sifter-batcher; - Press - Trabatto - Elevator - Drying chamber - Cooling chamber - Elevator - Storage-hoppers. Capacity: 250 2000 kg/h Thickness of product: 0,9-1,1 mm Raw materials: flour, semolina Energy source: liquid fuel, solid fuel, electricity, gas All components contacting with product are made of stainless steel AISI 304 Heat insulation is made of special polyurethane sandwich panels Drives and components are made in Europe Control system is carried out with controller and TOUCHSCREEN
Sweet Cream Butter, 82.5% fat; - 100% Native Ukrainian Ingredients; - Ingredients: Cream from cow`s milk; - Packaging: Laminated foll, 20 kg; - Group packaging: Box 20; - Net weight: 20 kg; - Gross weight: 20.35 kg; - Shelf life: - 1 month at a temperature from -5°C to 0°C; - 2 months at a temperature from -11°C to -6°C; - 2.5 months at a temperature from -18°C to -12°C; - Product GMO free; - All ingredients are natural and no preservatives; - Compliance with International standards (IFS); - Halal Certificate; - Terms: EXW, FCA, FOB Odessa; - Private and Custom labeling available.
Specification: Non-fatty matters, % max 0,2 Volatile matters & moisture, % max 0,2 Moisture content in the bottom test, % max 0,3 Acid number, mgKOH/g max 4,0 Mineral oil/hydrocarbons, mg/kg max 50 Absence of solvent residues Phosphorous-containing substances max 0,6% Temperature at receiving - not higher than 35 degrees C
Skimmed Milk Powder; - 100% Native Ukrainian Ingredients; - Ingredients:Skimmed cow`s milk; - Packaging: Kraft-sack with polyethylene inner liner, 25 kg; - Group packaging: Kraft-sack; - Net weight: 25 kg; - Gross weight: 25.4 kg; - Shelf life: 18 months at a temperature from 0°C to +20°C; - Product GMO free; - All ingredients are natural and no preservatives; - Compliance with International standards (IFS); - Halal Certificate; - Terms: EXW, FCA, FOB Odessa; - Private and Custom labeling available.
