Turbine, Boiler, Avtomatic.
M2m, engineering, electronic, programming.
Electronics.
signed to transmit / receive data via radio channel at a speed of up to 9600 bit / s in the frequency range (2410-2465) mhz with the transmitter output power up to 10 mw. If cable routing between devices (which usually are using wired communication channels for data exchange) is impossible, then it is necessary to look for other means of communication, other than wired. Wireless transmission of data between devices is one of possible solutions for this problem. Wcd is a variation of radio extenders for communication lines using for communication interfaces rs-232 and rs-485. For more information please visit our website www.Technotrade.Ua
.Marketing authorization (state registration) of medicines, biologicals, medical devices, food supplements, cosmetic products in Ukraine
Laptops, tablet PC, smartphones.
Mobile phones.
Electronic cash registers, fiscal devices, POS printers and peripherals..Software developer.
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers. Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows. The heating system is FANCOIL heaters connected to classical heating system. Basic equipment convectors as follows: • box (making possible options: fiberglass, metal powder-coated); • copper-aluminum heat exchanger; • flexible connection hoses with shut-off valves; • tangential fans (in models with forced convection) Optional equipment: • oak grill or duralumin (different colors, roll or longitudinal) • Electronic room thermostat; • converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300); • converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120); • smooth speed control of fans. Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting. Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors: • box of fiberglass-50 years • box with powder coating 10 years • wooden box (floor) - 2 years • copper-aluminum heat exchanger 10 years • aluminum grille-5 years • wooden lattice - 1 year • electrical parts - 5 years • valves - 1 year Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter. 9kg for 1 m.P sizes upon request
Organic creams, seafood, metals, services, telecom, banking products.Telecom and it services, banking applications, android, ios, windows
Agriculture, industrial supplies, apparel & fashion, medical & health care, chemicals, mineral & metals, commercial service, packing & container, computer & office supplies, plantation, construction & real estate, printing/publishing/paper, electronics & electrical, sports & recreation, energy, stock breeding, environment, telecommunications, fish culture, textile, food & beverage, transportation.
Sugar, soybean, maize, corn, sunflower oil, oil seeds, milk products, diet products, sweets diet, butters, grains, buckwheat, elevator equipment, fertilizers, wood, agricultural machinery and equipment, industrial and mining equipment iron mines coal metallurgical, solar systems, energy, power plant, gas and diesel generators.
Fuel dispensers' pumpheads (electronics and indicators) unicon-tit are designed for provision of control over fuel dispensers (pumps) to deliver liquid and liquefied petroleum products and visualize this process on indicators of the dispensers. Modes of operation: -autonomous: delivery of petroleum products is made at removal of dispenser nozzle or using a switch start; -autonomous from a preset keyboard: mode of petroleum products delivery (delivery of certain volume, delivery for a certain sum of money, delivery up to a full tank), order's amount and allowance for a delivery are set from a keyboard of the device; -from a control system: mode of petroleum products delivery, order amount and allowance for a delivery are set by a remote control system (cash register, pos system, control panels, etc); -from a control system at setting a doze amount on a keyboard of the indicating device: in this case operation mode of a fuel dispenser and an order amount are set on a keyboard of the indication device and allowance to make delivery of petroleum products – from a remote control system (cash register, pos system, control panels, etc). For more information please visit our website www.Technotrade.Ua
A4 paper 80g 1.size: A4(210*297mm) 2.gram:80/75/70gsm 3.brightness:102-104% 4.material:100% wood pulp a4 paper 80g New product under Paperon, makes your copy machines "Accelatration" 1. “Being mild”, within international trend of paper color, the natural whiteness prevents eyes from dizzling and pain in reading. 2. “Being smooth”, padded with calcium carbonate combined with non-pollution PC, the paper has more smoothness and better 3D effect. 3. “Being economic”, AKD 2-sides gluing makes the paper with perfect ink-absorption which can save expense from consumables. 4. “Being jam-free”, tight fiber structure prevents paper from jamming and curling during copying and suits for high speed copying. 5.” Being responsible”, As an eco-friendly enterprise, we make paper with farmed tree instead of forest tress and reduce emission of carbon dioxide . Seven advantages: 1.Good feeding effect: Precise control on moisture during production guarantees the flattening of paper in copying and reduces jamming. 2.Distinct copying: Smooth surface makes for copying of original colors. The copy looks like originals. 3. Time saving and convenience: Paper is neatly and precisely cut with rotary engine. Paper does not adhere to each other. Jamming and double-feed happens less. Thus work time is saved. 4. Being white and bright: with high-quality material and advanced techniques, the paper is high in whiteness and brightness and improves distinctness in copying. 5. Longer working life of copy machines: neat cutting reduces the dust in paper. Smooth surface reduces the machines from wearing and maintaining. 6. Double-copying, and economic: high-quality material makes the paper with good opacity. Double-copying still has good effect. 7. 500 sheets in one ream: we guarantee 500 sheets of high quality paper in one standard ream.
Pressure-Volume and Flow-Volume, displayed waveforms can be cycled instantly with a touch of a button 3.Standard integrated metallic modular respiratory circuit; completely solves the problem of gas sealing under high temperature disinfection, easy to clean and disinfect 4.Power Failure Support Functions: Automatically converts to backup power mode during AC power outages 5.Equipped with electronic pressure differential flow sensor, imported respiratory control valve, stable and reliable, rapid response time 6.High precision five tube flowmeter, fitted with interlocking oxygen-nitrous oxide supply, guarantees oxygen output is never lower than 21% 7.Nonhazardous environmentally friendly frame, precise construction, elegant design, equipped with automated self-checking function during startup and an automatic self-calibrating sensor 8.Alarms: Audible and/or visual alarms for tidal volume, airway pressure, oxygen concentration, asphyxia, power failure, oxygen failure and other alarms, also features a alarm query function 9.Vaporizer: Imported tank components assembled locally; Enflurane, Isoflurane and Sevoflurane (Halothane optional). Also possesses self-compensating functionality 10.Advanced and stable Adjustable Pressure Limiting (APL) valve, suitable for low and ultra low flow anesthesia 11.Equipped with advanced international rotating Na-lime tank, easy-operate, requires only one hand, and uses imported PPSU material and temperature resistant to 134�°C 12. Multi-parameter Patient Monitor: Optional
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
The charcoal kiln UMT-3 The charcoal kiln UMT-3 has all the unique qualities installations series "UMT". But in this model we have provided not only enhanced protection from the so-called "human factor", but also we have developed an automatic protection that works completely offline. It allows to reduce in several times the risk of equipment damage from negligence of employees and increase productivity by 10-15% . Now the minimum capacity of this charcoal kiln is 35 tons per month using wet wood till 50 tons per month using dry wood. Also its possible to burn all kinds of fuel briquettes such as "Pini Key" and "Nestro" into charcoal briquettes The productivity of the briquette is 100-120 tons / month 1.Improved installation design. 2.Increased productivity from 35 tons per moth for charcoal and 100-120 tons per month per briquettes 3.Automatic protection from extreme temperatures, works completely offline. 4.The high quantitative and qualitative characteristics of charcoal and briquette. The ratio of wood to charcoal is 5.1m3 per 1 ton of charcoal 5.Low operating costs. The equipment serves one person whether it is a single installation, two or three. 6.Works on its own gas. Power consumption is 20 W/hour, 24V/hour 7.Quick and easy unloading of finished products and loading of raw materials in the retort - up to 5 minutes 8. Mobility. Charcoal kilns can be moved if its necessary. 9.Work without repairs. We give a guarantee for two years 10.Environmental cleanliness. No emissions into the atmosphere either before or after or during the production process 11.Extended range of plug-ins for the selection of excess heat - a wood drying, hot water boilers, waste incineration. 12.Low cost of equipment. Taking into account the calculation of the cost of a ton of charcoal produced per year, the price of charcoal kiln is the lowest in the world market. Two years of operation have confirmed the reliability of our equipment Parameters Width -depth ?height 5680x2600x2690 mm Weight 8500 kg Productivity 30-55 tons per month Guarantee 24 months Terms of manufacturing 45 workdays
Cars , Electronic Devices, Boat Engines, Mining Machines Graphics Cards Motorcycles, Automobiles, Phones Video Games , Play Station, Etc.
Charcoal, water purification system, amber, LED lamps.
Key features of the production line: Proofing of product at proofing chamber for improving quality of products; Replaceable drums of forming machine for different kinds and sizes of product; Options for additional equipment: - Automatic dough feeding system into extruder - Salt sprinkler at the oven entry - Oil sprinkling on the exit form the oven - Stackers for staking products in stacks; Design of lines can be developed according to customerâ??s production premises. Equipment set of the line: - dough kneading device; - proofing chamber; - feeding conveyor; - extruder; - laminator; - three-modular rolling machine; - forming machine; - tunnel oven; - rotary conveyor; - cooling conveyor; - stacker Capacity - 300-1200 kg/h Quantity of dough layers: 8-16 Raw materials: flour Energy source electricity All components contacting with product are made of stainless steel AISI 304 Drives and components are made in Europe Control system is carried out with controller and TOUCHSCREEN
