CMM-12R is designed for extension of transformer service life by restoration of dielectric strength and chemical composition of electrical insulation oil. In the process of oil regeneration, decomposition products and acidic compounds are removed, the oil is clarified, its oxidation stability is improved, and gas solvency is reduced. The unique feature of the CMM our units is the ability to regenerate transformer oil directly in a transformer with the transformer either online or offline. The functions of the unit: *Oil regeneration; *Thermal vacuum drying of oil; *Vacuum treatment of transformer; Such regeneration of oil is capable of removing sludge from paper insulation and capturing it with the sorbent. One of the advantages of the regeneration unit is the use of Fuller`s earth sorbent, which can be reactivated many times. This gives the unit the capability to process oil continuously without stops to change saturated sorbent. Even after the sorbent is completely exhausted after 1.5 to 2 years of use, it is completely environmentally safe and can be used as a filler for construction materials and mixes. The CMM 12 our unit is controlled by a computer with special status software. The scanner control system offers the operator full control of all components. The operator can control the equipment, switch to various modes of operation, monitor sensor indications and access event flow. As requested by clients, the CMM-12R can be controlled remotely via the internet. If GlobeCore assistance is required, we can simply connect to the unit through the internet and monitor the entire operation process - if there is a problem, we will see it. Many of our clients purchase equipment for operation in unstable climates, explosive environments and even at sea. The CMM units can be manufactured in various optional designs. The most popular and convenient design is placement of the unit on a one or two axle trailers - this trailer has a metal frame covered with metal sheets and is equipped with an operator room.
Components and service parts for: - trucks - tractors - automobile cranes - road engineering - quarry equipment
AlmaTex 114 is a complex additive based on an optimized mixture of hydrocolloids for the bitten and dense structure of hot meat products (with secondary heating). Scope: Meat products. Technological functions: -gives the density, biting, the crunch of a product with preservation of elasticity and juiciness in a hot look including at secondary heating; -provides stable quality of meat products during storage, excluding syneresis; -products with the use of AlmaTex 114 are thermostable, do not separate moisture, and do not lose their shape during various types of heat treatment; -replacement of expensive raw materials with products using AlmaTex 114 significantly increases the economic efficiency of finished products. Dosage: 1.0-1.2 kg / 100 kg of minced meat.
Manganese Ore (%25-28) Origin: Egypt We can supply 15.000 MT montly. For more information please contact by
We are able to supply Ukraine origin Leonardite, as a source of natural humic acids . Origin: Ukraine Packaging : 1000 kg. 25 MT in 40' FCL Form: powder or granules. Quantity: 25-500 MT per shipment Quality parameters: Moisture (operation), % - 30,00 - 45,00 Ash (dry basis), % - 10.00 -12,00 Acidity % - 5.00-6.00 Humic acid (incl fulvic), % 65,00 - 86,00 Standard fraction 0.1-8 mm
1) Drive mode: Hydraulic drive with 2 individual hydraulic pump 2) Max. pulling and clamping force: 10T 3) Motor power: 3KW2 4) Pulling speed: 0.1m 1m/min 5) Heating system: 6 heating zones with heating blocks (option: heating plate) 6) Heating temperature range: 0-300 with control precision ±1 7) Max. Clamping Space: 600mm 300mm 8) Clamping method: from up to down 9) Max hydraulic system pressure: 10Mpa, with cylinder diameter 110mm 10) Electric control: PLC station with English text display which enjoys the function of speed indication. 11) Linear guide with stainless steel dust cover. 12) Overall dimensions: 10m(length) 0.9m(width) 1.6m(height)
Grade standards: KSR-57, 60, 67, KSF-65, 70, 75 K-value 56-58/59-61/66-68/64-66/69-71/74-76 Bulk density, g/l 540-630/520-620/550-610/460-560/450-530/430-510 Flowability, s/150g, max 20 Absorbed plasticizer (g) per 100g 14-20/15-22/17-23/24-30/29-35/30-36 Thermostability of film under 180C, min 30/30/45/35/40/40 Moisture and volatile matter, %, max 0.3 Residual vinyl chloride, ppm, max 1
We are Ukrainian factory of welding electrodes "Electrode Group" LLC. Our factory produces welding electrodes Electrodes E6013 RC - rutile cellulosic Electrodes E6013 R - rutile Electrodes E7018 - basic Stainless electrodes and other special electrodes
Currently, the most common source of copper ore is the mineral chalcopyrite (CuFeS2), which accounts for about 50% of copper production. The focus of this article is on the process of copper extraction from chalcopyrite ore into pure metal. Processes for other minerals are mentioned. Owing to our wide experience of more than one decade in this domain, we are noted entity engaged in importing, exporting supreme quality Copper Ore. The combo of its abundance and physical properties make our offered ore is more valuable in the national as well as international market. Moreover, this ore is available with us at the most competitive rates. Copper(Cu), % 25.0 Min Lead(Pb), % 5.00 Max Cadmium(Cd), % 0.05 Max Mercury(Hg), % 0.01 Max Flourine(F), % 0.10 Max Arsenic(As), % 0.50 Max Moisture(H2O), % 5.0 Max Size 0-100mm Features: Odorless High density Effectiveness General specifications of copper ore DETERMINATION (mass%) Copper 40.01% Total iron as Fe 21.60% Silicon as Si0 20.24% Total Sulphur as S 17.10% Zinc as Zn 0.01% Moisture or 105 C 1.14%
Grain Energy LLC produces aerodynamic grain separators "ASM" with a capacity of 5 to 50 t/h intended for cleaning and calibration: wheat, barley, flax, soybeans, coffee, sunflower, corn and other crops. Minimal energy consumption due to the use of a frequency converter of European production. The efficiency of the separator is VERY high. The output of the cleaned and calibrated material occurs through 7 trays: - the first gets the largest debris (stones, pieces of earth, stems, spikelets, etc.); - material from the middle part of the ear, corn cob or sunflower cap gets into 2-3 trays. This is the most viable material of the whole heap, seed germination rate up to 98%; - material from the bottom of the ear gets into 4-5 trays - this is commercial grain, varietal, which will bring the maximum profit - grain from the upper part of the ear (unripe, light, halves, crushed grain) falls into 6-7 trays. Which in an unclean heap significantly reduces the cost of the harvested crop! Advantages of the ASM grain cleaning machine �· Work with material of any moisture and debris; Versatility - works with any bulk materials: grain, groats, chaff, etc. Low power consumption; All parts are cut by plasma cutting - precision during assembly and quality of the separator; high performance; Only high-quality European components; Does not require complex care and maintenance; Modular assembly-disassembly system; During aerodynamic separation the seed is not injured, the marketable grain has a high degree of purification from grain, mineral and other impurities. Allows you to prepare high-quality and viable seed 2 years warranty. Grain Energy LLC successfully sells equipment to the countries: Ukraine, France, Lithuania, Latvia, Albania, Bulgaria, Romania, Hungary, Austria, Germany. We carry out dispatch and support of equipment for export. We are looking for partners in your country.
Country of Origin: Ukraine . Size: 10-100 mm (90% min) . Quantity: Approx. 500 Metric Tons per Month / or 1 (one) year contract of delivery of 10,000 Metric Tons of FeMn slag . Specification: Mn - 47% max, Si - 13.8%, S - 0.52%, Ca - 31.3%, Ti - 0.21 %, Fe - 7% . Packing: 1 MT Big Bags Delivery Terms: FOB Odessa Sea Port / Or can be discussed CIF ASWP *We are producer of these materials. Please contact directly by email/WhatsApp/Mob.T.
Country of Origin: Ukraine Size (Fractions): 0-05mm / 0-10mm / 0-20mm / 0-30mm (90% min) Quantity: 1000 Metric Tons per Month / 10 000 MT per Year Specifications: Mn - 73 C - 6,90 Fe - 8,3 S - 0,054 P - 0,185 Si - 1,61 Packing: 1MT Big Bags Delivery terms: FOB from Odessa South Sea Port / can be discussed CIF ASWP We are producer. You can contact with us by email/WhatsApp/Mob.T.
Polyethelene Zip-Lock tape for vacuum packaging of different sizes. Send us your quotation and we will calculate the price. EC "Automatic Group", Ltd. is well known in Ukraine. We supply our products to Nestle, Jacobs, Mondelez production sites that located in Ukraine. Our company is certified according to the standards of ISO 9001: 2008 and OHSAS 18001: 2007. Production site is also certified according to the requirements of the international standard FSSC 22000 "Food Safety System Certification".
Kaolin clay - in any quantity and packaging
Bentonite clay - in any volume, in any package.
NaOH, min 48% Na2CO3, max 0.2 NaCl, max 0.012 NaClO3, max 0.004 Na2SO4, max 0.02 Iron (in conversion to Fe2O3), mg/kg, max 10
Grinded ABS plastic scrap made from computer, TV shells etc. Color may vary.
Raw PP, LDPE materials in virgin form from the biggest ukrainian raw materials manufacturer.
Grinded medical tubes PVC. Sorted. 8mm fraction
Grinded ABS, PP, rigid PVC for sale. Promotion is valid until December 25th! MOQ is two 40 feet containers. Book the material now and get your 30% discount!
