Iron ore with Fe Content 45-50% (on delivery terms of FOB Black Sea)
Iron ore with Fe Content 55-59% (on delivery terms of FOB Black Sea)
Test report of iron-containing raw materials
No.1: Fe total - 46,21%, Fe2O3 - 65,2%, SiO2 - 31,98%, Al2O3 - 0,92%, P - 0,043%, FeO - 0,77%, CaO - 0,14%, MgO - 0,21%, TiO2 - 0,033%, MnO - 0,009%, S - 0,027%, Insoluble residue - 0,93%.
No.2: Fe total - 50,56 %, Fe2O3 - 71,28%, SiO2 - 25,6%, Al2O3 - 1,05%, P - 0,039%, FeO - 0,90%, CaO - 0,17%, MgO - 0,14%, , TiO2 - 0,038%, MnO - 0,016%, S - 0,025%, Insoluble residue - 0,98%.
No.3: Fe total - 55,49 %, Fe2O3 - 78,33%, SiO2 - 18,98%, Al2O3 - 0,80%, P - 0,045%, FeO - 0,90%, CaO - 0,13%, MgO - 0,21%, , TiO2 - 0,030%, MnO - 0,013%, S - 0,012%, Insoluble residue - 0,82%.
No.4: Fe total - 59,84 %, Fe2O3 - 84,83%, SiO2 - 12,96%, Al2O3 - 0,65%, P - 0,055%, FeO - 0,64%, CaO - 0,11%, MgO - 0,17%, , TiO2 - 0,029%, MnO - 0,011%, S - 0,009%, Insoluble residue - 0,76%.
Note: the chemical composition is given for reference and is not defective, with the exception of iron and is given for information.Iron ore from Ukraine with Fe content 59%.
Fe total - 59,54%, Fe2O3 - 84,33%, SiO2 - 12,9%, Al2O3 - 1,01%, P - 0,012%, FeO - 0,71%, CaO - 0,14%, MgO - 0,22%, TiO2 - 0,035%, MnO - 0,025%, S - 0,01%, insoluble residue - 0,87%.
Iron ore from Ukraine with Fe content 57%.
Fe total - 57,3%, Fe2O3 - 79,9%, SiO2 - 15,0%, Al2O3 - 1,34%, P - 0,027%, FeO - 1,81%, CaO - 0,17%, MgO - 0,27%, TiO2 - 0,056%, MnO - 0,037%, S - 0,013%, insoluble residue - 1,81%.
Note: the chemical composition is given for reference and is not defective, with the exception of iron and is given for information.
Mineral for fertilizers
BENTONITE-F
origin BENTONITE-F is a volcanic tuff mineral that belongs to a rare variety of bentonites. It has a high content of active silicon and wide range of elements.
BENTONITE-F is complex natural mineral of volcanic origin with over 35 trace elements vital for all living organisms.
As an agromineral BENTONIT-F is a highly effective, environmentally friendly multicomponent natural fertilizer and growth stimulator, a powerful sorbent.
BENTONITE-F, as a source of active watersoluble silicon, is the most important element in
organic mineral fertilizers and is more efficient than traditional complex mineral fertilizers.
Quality parameters:
Appearance: homogeneous brown powder without odour
Fraction : 0-3 mm
Packing : big-bags 600 kg
Agro-mineral content:
Macro elements, w% : SiO2 41,0-42,0, K2O 3,12-3,14
Microelements, mg/kg : Fe2O3 120000-140000, MgO 33000-37000, CaO
23000-25000,
MnO 900-1600, V 200-400, Cu 150-280, Zn 80-100, Co 40-80, B 20-40.
Ultra-microelements, mg/kg : Se 30, La â?? 25, Sm 20, Ne 14.
Movable (water-soluble silicon), not less than 3500 mg/kg
Acid-soluble silicon, not less than 70 000 mg/kg
Available silicon, not less than 150 000 mg/kg
Humidity: 2-4%
Our Workshop provides wide range of metal works according to customers draft such as:
conventional milling and turning
CNC milling and turning
Grinding
·Drilling
Welding
·Plasma cutting
CAD/CAM engineering
CNC programming
We work with
Carbon and mild steel
Cast iron
Titanium
Bronze
Aluminum
Nylon-6
For further information please feel free to contact us
Slide bearings and solid bushes made from bronze, cast iron, steel with or without antifriction alloy (tin-based, lead-based).
Solid bushes made of high quality bronze with low friction ratio.
For shaft diameter range 30mm...400mm
Strengthened tile adhesive "SM 514" for porcelain tiles is applied to facing inside and outside of buildings from brick, concrete and plastered surfaces on a cement or cement-lime basis by all types of wall and floor ceramic tiles and others facing materials with water absorption more than 2%. Facing works inside buildings can be carried out with materials with water absorption less than 1%, including large-format and porcelain tiles
CMM-12R is designed for extension of transformer service life by restoration of dielectric strength and chemical composition of electrical insulation oil.
In the process of oil regeneration, decomposition products and acidic compounds are removed, the oil is clarified, its oxidation stability is improved, and gas solvency is reduced.
The unique feature of the CMM our units is the ability to regenerate transformer oil directly in a transformer with the transformer either online or offline. The functions of the unit:
*Oil regeneration;
*Thermal vacuum drying of oil;
*Vacuum treatment of transformer;
Such regeneration of oil is capable of removing sludge from paper insulation and capturing it with the sorbent. One of the advantages of the regeneration unit is the use of Fuller`s earth sorbent, which can be reactivated many times. This gives the unit the capability to process oil continuously without stops to change saturated sorbent.
Even after the sorbent is completely exhausted after 1.5 to 2 years of use, it is completely environmentally safe and can be used as a filler for construction materials and mixes.
The CMM 12 our unit is controlled by a computer with special status software. The scanner control system offers the operator full control of all components. The operator can control the equipment, switch to various modes of operation, monitor sensor indications and access event flow.
As requested by clients, the CMM-12R can be controlled remotely via the internet. If GlobeCore assistance is required, we can simply connect to the unit through the internet and monitor the entire operation process - if there is a problem, we will see it.
Many of our clients purchase equipment for operation in unstable climates, explosive environments and even at sea. The CMM units can be manufactured in various optional designs. The most popular and convenient design is placement of the unit on a one or two axle trailers - this trailer has a metal frame covered with metal sheets and is equipped with an operator room.
AlmaTex 114 is a complex additive based on an optimized mixture of hydrocolloids for the bitten and dense structure of hot meat products (with secondary heating).
Scope: Meat products.
Technological functions:
-gives the density, biting, the crunch of a product with preservation of elasticity and juiciness in a hot look including at secondary heating;
-provides stable quality of meat products during storage, excluding syneresis;
-products with the use of AlmaTex 114 are thermostable, do not separate moisture, and do not lose their shape during various types of heat treatment;
-replacement of expensive raw materials with products using AlmaTex 114 significantly increases the economic efficiency of finished products.
Dosage: 1.0-1.2 kg / 100 kg of minced meat.
Grade standards: KSR-57, 60, 67, KSF-65, 70, 75
K-value 56-58/59-61/66-68/64-66/69-71/74-76
Bulk density, g/l 540-630/520-620/550-610/460-560/450-530/430-510
Flowability, s/150g, max 20
Absorbed plasticizer (g) per 100g 14-20/15-22/17-23/24-30/29-35/30-36
Thermostability of film under 180C, min 30/30/45/35/40/40
Moisture and volatile matter, %, max 0.3
Residual vinyl chloride, ppm, max 1
Currently, the most common source of copper ore is the mineral chalcopyrite (CuFeS2), which accounts for about 50% of copper production. The focus of this article is on the process of copper extraction from chalcopyrite ore into pure metal. Processes for other minerals are mentioned.
Owing to our wide experience of more than one decade in this domain, we are noted entity engaged in importing, exporting supreme quality Copper Ore. The combo of its abundance and physical properties make our offered ore is more valuable in the national as well as international market. Moreover, this ore is available with us at the most competitive rates.
Copper(Cu), %
25.0 Min
Lead(Pb), %
5.00 Max
Cadmium(Cd), %
0.05 Max
Mercury(Hg), %
0.01 Max
Flourine(F), %
0.10 Max
Arsenic(As), %
0.50 Max
Moisture(H2O), %
5.0 Max
Size
0-100mm
Features:
Odorless
High density
Effectiveness
General specifications of copper ore
Country of Origin: Ukraine .
Size: 10-100 mm (90% min) .
Quantity: Approx. 500 Metric Tons per Month / or 1 (one) year contract of delivery of 10,000 Metric Tons of FeMn slag .
Specification:
Mn - 47% max,
Si - 13.8%,
S - 0.52%,
Ca - 31.3%,
Ti - 0.21 %,
Fe - 7% .
Packing: 1 MT Big Bags
Delivery Terms: FOB Odessa Sea Port / Or can be discussed CIF ASWP
*We are producer of these materials. Please contact directly by email/WhatsApp/Mob.T.
Polyethelene Zip-Lock tape for vacuum packaging of different sizes. Send us your quotation and we will calculate the price.
EC "Automatic Group", Ltd. is well known in Ukraine. We supply our products to Nestle, Jacobs, Mondelez production sites that located in Ukraine. Our company is certified according to the standards of ISO 9001: 2008 and OHSAS 18001: 2007. Production site is also certified according to the requirements of the international standard FSSC 22000 "Food Safety System Certification".
