Luminaires are used for lightning of: Outdoor and indoor lightning facilities with emergency (reserve) lightning Housing of luminaires is made of aluminum alloy. ptics borosilicate glass or polycarbonate. Luminaires have anti-vandal protection. Different types of mounting allow to install luminaires without improvement of the existing mounting attachments.
Generators.
Diesel generators.Diesel generators perkins engines with stamford alternators and deep sea control panels all on stock 3phase prime power 100kva, 135 kva, 150kva, 180 kva, 250kva (and all others if needed please give an request via phone (whatsapp or email) standby power according to the type of generator frequency according to the type of generator
Turbine, Boiler, Avtomatic.
Power equipment, Power plants.
Gas Turbine Power Plants (with Unit Capacity 2.5; 6; 15 and 16 MW), Waste Heat Boilers and Heat Recovery Steam Generators, Gas Turbine Engines Like DZh-59 (15 MW, Zorya - Mashproekt ), AI-20 (2, 5 MW, JSC Motor Sich ), NK-16-18ST (18 MW, KMPO ), MS-5001 (26 MW, General Electric ), LM6000PD-Sprint (45 MW, General Electric ), Auxiliary Equipment Like Air-Cleaning Devices, Noise-Suppression Units, ACS With Higher Level, Heat Exchangers, Convective Blocks, Economizers, Steam Superheaters, Parts of Heavy-Duty Steam Boilers Like Radiation Superheaters, Reheater Panels, High-Frequency (HF) Welded Fin Tubes, Material Such as Carbon Steel, Alloy Steel.
Industrial And Electrical Equipment..
Diesel generators, gas-diesel generators, marine diesels, gas-turbine engines, boilers, transformers, isolators, turbo generator, turbines, breaker, pump, compressor, lathe, relay, contactor, automatic circuit breaker, electromagnetic starter, motor, press.
Power hand toos tools, non power hand tools., welding inverter and mma., consumables, cutting and grinding disks, welding electrodes.
SMP, FFMP, SWP.
Turbine equipment, spares for turbines and compressors.Repairs and maintenance of turbines and compressors
Spare parts for gas turbines.
Soil stabilizer.Manufacture
Nk 12 st gas turbine engine.
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
Hydraulic turbines.
Steam turbines.
Gas turbines.
