Safety architectural glass, bullet-proof (armored) glass, furniture glass, triplex, tempered glass.
In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types. Tempered glass constitutes flat glass, subjected special thermal treatment tempering, in result of witch in glass volume arise naturally distributed internal tensions, witch enlarge mechanical glass strength and provide special (safe) character of its destruction. Increase of mechanical strength (while bend can reach 250 mpa that is five times higher than in usual flat glass) stipulates increase of glass thermal resistance in 3-4 times (since 40 till 180 0c). Flat glass has thermal resistance by 40 0c, tempered glass by 180 0c, that prevents tempered glass from destruction while overheating and temperature difference. It is very important while using in external glass cover by toned and reflex glasses with absorption factor of thermal energy more than 25 %, when glass can get hot till 90 0c. In europe, lately, is widely spread the use of tempered glass with the purpose of safety, longevity and reliability. Bent tempered glass almost does not differ from tempered flat glass, the difference becomes apparent only on the final stage of the process. Glass after heating section comes to tempering section, where in a short period of time flat glass bends by the forming rollers. The forming rollers are usually set according to the radii models and forms. USE: Structural flat glass cover of buildings façades Shops and supermarkets windows Partitions in apartments and offices Glass doors Saunas doors (tempered glass stands perfectly heat strokes) Stairs and parapet fences Roofs, roof visors Winter gardens building Electric and gas ovens doors Escalators side supporting planes. Our company can offer: Tempering of clear float glass, thickness: from 4 till 19 mm Tempering of toned on the whole glass Tempering of reflex (sun protective) glass.
Orion-Glass Ltd produces glass that is widely used in the architecture and building. Architectural glass cover this is the opportunity to change the external building view by using modern technologies and materials. In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types. During last ten years glazing became one of the most popular methods in modern architecture. In the architecture in glass industry is widely used a great spectrum of implantations - (structural glass cover, plate, toned and bent glass). Architectural glass is widely used in building for the external glass cover (buildings facades, shop windows, winter gardens, windows, doors, trading pavilions, bus stops and so on) and in internal building and construction decorating (office partitions, check-points, stairs fences, stained-glass windows, floors). Modern building market suggests façades glass cover by using aluminum profiles. Such constructions, due to its practicality, are very popular among those, who want to add attraction in the houses and in the offices using stylish and lone-lived façade. Architectural buildings surprise the spectator of the transparency and lightness of its constructions. But using of usual glass while building high constructions is not safe, that is why the architectures and builders use the products of the modern technologies - tempered glass. Due to its unique properties and rather high level of safety (in comparison with usual glass), tempered glass became more popular in different fields. For example, in modern building this material is successfully used while glass cover of the constructions of any difficulty including many-storied buildings facades, stairs fences, translucent roofs and floors; while balcony and loggia glass cover, bus stops, while producing of the shop windows and stained-glass windows. Today tempered glass became more and more popular in offices and public buildings. Tempered glass is used for producing of the counter reception, office partitions, counters for booklets and periodical. Using in building of the high-test tempered glass this is not only the tribute to the fashion and progress, but also the opportunity to save the balance between beauty and safety.
Company ORION-GLASS LTD can offer your attention wide spectrum of furniture and accessories made of glass, beginning from glass table in hi-tech style and ending glass decoration of the room and componentry. Glass furniture from ORION-GLASS LTD this is: Originality and lightness Reliability and design Prestigiousness and comfort Glass tables due to its visual lightness and elegance will beautify any house. It will look perfectly in the interior of the kitchen or in the sitting-room, and magazine table will add a completion touch to the bedroom, private office and library design. Wide model assortment helps to complete any design beginning from the classical and ending by the most popular design for today hi-tech style. Glass table, due to its unique style, can be the key object of the design. Glass table is the brilliant on the background of the furniture units in the interior of the room.
Orion-Glass Ltd produces unicameral and double cameral double glasses with clear glass, multilayer glass, tempered glass, toned and bent glass, unicameral and double cameral double glasses with low-emission glass (K-glass), (I-glass), arched and trapezoid double glasses and also double glasses with figured glass. For double-glasses manufacturing we use high quality glass from the European manufacturers, of the mark M0. All double glasses pass the quality control according to the all-Union State Standard 24866-99 Pasted double glasses of the building function and the all-Union State Standard 111-2001 Sheet glass. Technical conditions. The assortment of the double glasses, produced by our company, is very large and which of it is the best to use depends only from you. All modern heatproof double glasses guarantee not only warm and comfort, but also protect from the negative influence of the ultra-violet and infra-red radiation, and due to the reflective covering and colour filter reduce the intensity of the fireballs. Double glasses are the basis of the window. Window systems characteristics mainly depend from the quality of the double glasses. What the double glasses represent? This is the construction that consists from two or three sheets of glass, hermetically connected by means of the spacer that forms closed chambers. The chambers are filled in with dry air or rare gas that improves the thermal physic properties of the double glass. The distance between glasses in the double glass defines by the thickness of the remote frame that can have the following sizes, mm: 6, 8, 9, 10, 12, 14, 15, 16, 18, 20, 22, 24. As the dryer is used the highly porous matter, got in the remote frame that actively adsorbs steam. The most popular are two types of the double glasses: - unicameral (twin double-glass) this is the construction consists from two glasses. Between glasses are the thin-wall aluminum (so-called remote) frames with perforation that is filled in with special granules that absorb the air moisture inside of the double-glass and protects glasses from the sweat. The double glass, around the periphery, is pressurized by the special two-component mastic. That is why inside of the waterproof double glass there is no moisture, no dust, - the double glass always remains transparent and clear. - double cameral (triple double-glass) - this is the construction consists from three glasses. Between glasses are the thin-wall aluminum (so-called remote) frames with perforation that is filled in with special granules that absorb the air moisture inside of the double-glass and protects glasses from the sweat. The double glass, around the periphery, is pressurized by the special two-component mastic. That is why inside of the waterproof double glass there is no moisture, no dust, - the double glass always remains transparent and clear.
Triplex glass for the needs in architecture, automobile building.
