high quality and affordable rubber granule
Quality rubber powder and affordable price
Our monthly producing capacity is 200 tons of Epdm Rubber and seals. We supply EPDM, NBR , SBR, NR, TPE, Sponge and Solid profiles,Gaskets, aluminum gasket,O-Rings,V-Profieles,Uprofieles, U wick gasket, hatch Cover Gaskets over 3000 products to more than 20 countries.
Good quality women's coats with fur accessories
Rubber and tyre products The special orders are accepted under the availability of technical drawings Rubber and tyre products The special orders are accepted under the availability of technical drawings
Elastomeric bearings consisting of a solid block of vulcanised elastomer without internal cavities are called plain pads. Plain pads are economical efficient support for precast and pre-stressed concrete or steel beams in bridges and buildings. These pads are designed according to required standards and shear modulus of the manufactured elastomer may vary between 0.6-1.35 MPa to meet the customers need.
We can supply pcu and reprocessed synthetic rubber(SBR, BR, IR, etc.). Please get in touch with us for more information and availability. Mustafa Tolgay
The Ozdekan EXpansion Joints are waterproof expansion joints that allow absorption of the deck movements. These joints are manufactured with rubber elements and restrained to the structure with proper anchor bolts. The reinforcing metal profiles made of steel are completely inserted and vulcanized to the rubber. This process is a total guarantee against corrosion and allows a longer life to the product. The rubber compound, too, has been intentionally formulated to resist the oil, grease, petrol, salt and sand, without besides, suffering premature ageing phenomena due to sun rays, salt and snow. All the joints follow the deformations and movements of the structure (the movement can exist with every skew angle from 0° to 90°) by shear deformation of the rubber elements. Anchor bolts, made of steel and protected with anticorrosion treatments, absorb the elastic reactions and all the other kind of mechanical solicitations. The joints are also able to compensate height difference or vertical movements. This characteristic is very important in all the cases where load and movement conditions can cause relative vertical movements. The joint series is manufactured by Ozdekan since 2006. Main advantages: Simple and linear design with few elements Low height of the profile Total impermeable Easy assembling eitheron concrete structure Suitable for the replacement of existing joint Easy and quick to be replaced Good resistance to vehicles sliding Vertical movements absorption The joints are supplied in variable length elements depending to the joint type. A joint line consists in fact of many units joined together with a groove-and-tongue junction welded with special glue. The joint fixing is obtained by chemical anchors; the nuts are locked using a dynamometric key so that permanent compression strength is given to the joint. Stainless steel anchors may be provided on request. In that way the horizontal forces, due to breaking of vehicles and to the reaction that rubber opposes to the joint deformations (shrinkage, creep, thermal variations etc.), are transmitted by friction between the rubber and the concrete. The joints can be assembled on a metallic infrastructure. The joints of bigger movements with four upper grooves are manufactured in order to prevent the lifting of the elements during the contraction. These devices guarantee the adhesion of the elements to the structure and the noiseless of the traffic.
Bromobutyl and Butyl Rubber Possible With Lc payment terms...
Material : Rubber and EPDM granule Color : Black, yellow, green, gray, blue, purple, etc. Thickness: 15/20/ 25/ 30/40/45/50mm Specification : 500mm*500mm, 1000mm*1000mm Package : In pallet Surface treatment : compact Service life: More than 15 years Flame retardant: Bf1-S1 Acoustic performance : 12dB Anti resistive >10 Chemical resistance qualified Dimensional stability : 0.05% Residual depression degree : 0.08mm Skid resistance: R9 group Degree of fading : >= 3 rating Abrasion resistance : T group Resistance performance : -0.05mm The national material testing : qualified
Extremely elastic, ductile and compressible Good corrosion behaviour and high absorbency Heat resistance up to 80° c Low temperature resistance up to -40°c Resistant to uv-ozone and lubricants Elongation at break: 350 -600 %, depending on sponge type Tensile strength: 10 - 60 n/cm², depending on sponge type Environment friendly. Variable
30.000 MT available in Iskenderun Turkey ,Coated Granular Urea, CFR Turkey, in Break Bulk ($/MT): 335$
50cmx50cm 20mm 100cmx50cm 20mm , Wear-Resistant, Non-Slip, Anti-Static and Soundproof
Waterproof, Wear-Resistant, Non-Slip, Anti-Static, and Soundproof rubber tiles are designed to keep children and everyone safe. 40X40 cm x 20 mm black, red, green 9.25 /Euro / m2 50X 50 X 2 black, red, green 9.25 /Euro / m2 100 X 100 X 2 black, red, green 12.40 / Euro / m2
Wholesale Colorless Rubber Crumb Polyurethane Adhesive glue Waterproof Rubber Binder, Mix with EPDM or SBR rubber granules, to install running track, playground, sport courts, jogging track, park, etc. 20kg/bucket, 960kg/pallet, 19.2ton/20ft container 200kg/drum, 16ton/20ft container
UNVULCANIZED/UNCURED SBR+NR RUBBER COMPOUND
TSR 10 (NATURAL RUBBER)
We are delivering a high quality range of Nylon Friction Scraps to our esteemed consumers. These are widely used in numerous sectors. Our products are widely admired for their quality and durability.
EKASWELL SB850, Thermoplastic Elastomer (TPE) based hydrophilic particles with high swelling and long cycle capacity. Application areas: Indoor and outdoor places. Pools, water tanks, treatment plants. In basic-curtain combinations. Pipe inlet and outlet. Construction joints in cable ducts. In tunnel segments. In the joints of old and new concrete. Used in construction joints. Advantages: Easy application. Flexible. Controlled swelling does not inflate suddenly in concrete casting and does not damage concrete. It is resistant to high salt concentration and various chemicals, There is no disintegration and. The cycle capacity is high. Technical Features: Ekaswell SB850: Calculated at 23 C. Expansion rate: %850. Elongation at break: %490/770. Tensile strength: 1.2/2.2 Mpa. Color: Beige, Blue, Red, Yellow, Green (can be produced in all colors). Density: 1,25 g/cm3. Hardness: 40. Application temperatures: -30C / 70C.
Our coat, crafted with a chic blend of quilted and wool fabrics, offers both modern style and daily wear comfort. Color options: Mummy brown, Green, Black
