The Ozdekan EXpansion Joints are waterproof expansion joints that allow absorption of the deck movements. These joints are manufactured with rubber elements and restrained to the structure with proper anchor bolts.
The reinforcing metal profiles made of steel are completely inserted and vulcanized to the rubber. This process is a total guarantee against corrosion and allows a longer life to the product.
The rubber compound, too, has been intentionally formulated to resist the oil, grease, petrol, salt and sand, without besides, suffering premature ageing phenomena due to sun rays, salt and snow.
All the joints follow the deformations and movements of the structure (the movement can exist with every skew angle from 0° to 90°) by shear deformation of the rubber elements.
Anchor bolts, made of steel and protected with anticorrosion treatments, absorb the elastic reactions and all the other kind of mechanical solicitations.
The joints are also able to compensate height difference or vertical movements. This characteristic is very important in all the cases where load and movement conditions can cause relative vertical movements. The joint series is manufactured by Ozdekan since 2006.
Main advantages:
Simple and linear design with few elements
Low height of the profile
Total impermeable
Easy assembling eitheron concrete structure
Suitable for the replacement of existing joint
Easy and quick to be replaced
Good resistance to vehicles sliding
Vertical movements absorption
The joints are supplied in variable length elements depending to the joint type. A joint line consists in fact of many units joined together with a groove-and-tongue junction welded with special glue. The joint fixing is obtained by chemical anchors; the nuts are locked using a dynamometric key so that permanent compression strength is given to the joint. Stainless steel anchors may be provided on request. In that way the horizontal forces, due to breaking of vehicles and to the reaction that rubber opposes to the joint deformations (shrinkage, creep, thermal variations etc.), are transmitted by friction between the rubber and the concrete. The joints can be assembled on a metallic infrastructure. The joints of bigger movements with four upper grooves are manufactured in order to prevent the lifting of the elements during the contraction. These devices guarantee the adhesion of the elements to the structure and the noiseless of the traffic.
Dimensions: - Width*Length: 36cm * 107cm - Height: 5 cm Purpose: - Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron. Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can slide freely along the angle iron to meet the expansion deformation of main grid. - Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear deformation in the telescopic channel helps the whole device to realize telescopic motion. Features : - Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and have a long service life. - Wear resistance, corrosion resistance. - Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians. - During installation, bolt holes on the bottom and each junction are filled with adhesion agent which makes the whole rubber bridge expansion joints be highly water-resistant. - Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise. Material: Rubber & Steel Plates. Applications: - Rubber bridge expansion joint is used in expressway. - Rubber Bridge expansion installed in the end of bridge. - Rubber bridge expansion joint is used flyover. - Rubber bridge expansion joint is used in connection of bridge
PE (Polyethylene) Expansion Joint Filler Board is a pre-moulded, high performance joint filler board. It has a closed cell and cross linked structure. It has an excellent recovery of 95% (after compression upto 50% of original thickness), which makes it the most suitable product for the said usage. It is an exclusive product specially designed to be used as expansion joint filler in concrete, brick, block work and isolation joints. It is also rot free and has no bitumen. What are the features and advantages of filler board? Resilient â?? Our EJF boards delivers 95% compression recovery after deflection (compression), that it is the most important and excellent attribute for any expansion joint filler boards. Weathering Effect â?? Joint filler board is resilient and additionally absolutely does not distort under less load transfer from wet concrete. Closed cellular composition â?? Very low water absorption consequently non deteriorating and also resilient Bitumen free â?? Non-staining and easy to apply. Chemically Resistant â?? to almost all types of acids, alkalies and hydrocarbon group materials. Simple â?? Easy to handle, carry, load/unload, install. Load absorption is higher and transfers to the structures very little. What is the use of filler board? Expansion joints at airport runways and taxi tracks The next usage are in mall parking lots as well as structures Furthermore these are applied to Isolation Joints to infill sections In addition to water-proofing also used in concrete flooring. Water retaining as well as water eliminating structures Inter-connecting pathways between buildings Basements, flyovers as well as subways. These kind of boards used in concrete roads as well as toll plaza flooring. Bridges, verandas, abutments and pier hinge joints For more details please visit: https://www.kampun.com/expansion-joint-filler-boards-kampun-hd100-board/
Supplier: Rubber bridge expansion joint, bridge bearing, steel bridge joint
Type: Single Type, Double Type, BSP/NPT Thread Type Size Range: DN25-DN1600 Material of Rubber ball: CR, NBR, EPDM, HYPALON, VITON Material of flange: Galvanized Steel, Stainless Steel Working temperature: -20â?? to +115â?? Ball length for Single Sphere: 130mm, 150mm, 95mm-300mm Ball length for Double Sphere: 175mm-345mm Ball length for Union Type: 200mm for DN15-DN50, 240mm for DN65-DN80. Thread End Connection: BSP or NPT thread Flange End Connection: EN1092-1 PN10/PN16, ANSI150, BS4504, AS2129 Table D/E. Working Pressure: PN6, PN10, PN16, PN25 Application: water, warm water, seawater, weak acids, alkalis, etc... Easy installation and remove; absorbs vibration, noise and shock -
Types: Single Sphere, double-sphere; Flange Type, Union Type Flange drilling: ANSI class 125/150, DIN PN 10/PN16, JIS 5K/10K Working pressure: 1.6mPa (16 kgf/cm2) Working degree: -15 to +115 degrees Celsius Working medium: Vapour, compressed air, cold & hot water, seawater, oil, weak acid, alkali Material list: Body: Neoprene, EPDM, NBR Lining: Chinlon Cord Fabrics Frame: Hard Steel Wires Flange: Carbon Steel.
A.B. Elasto is one of the best rubber expansion joints manufacturer in India with maintain good quality and structure for various industries. All the products are available with various sizes and dimension for different purposes. Our services: A large numbers of engineers of our team have given their full attention to give a better service to our clients all over the country. Numbers of labs work hard to reduce the rigidness of the expansion product and with the God's grace we have achieved the success and now you can have smooth and more expandable rubber joint products. All A. B. Elasto extension products carry safety rating exceeding product specifications in such areas of pressure and movement. Hundreds of application in a wide range of industrial uses including Power generation Chemical processing Hold the waste water protect water dipping Mining Marine Why choose us? We are the one of the best Kolkata based product leading in the market for more than 25 years of reputation. We have been giving our best services in different sector like Petro-chemical, Railway, Defence, Auto-mobile etc. Different kind of pipes can be joined by the rubber expansion joint of A. B. Elasto Product Pvt Ltd. We are the one of the best manufacture of rubber expansion joints in India> that is fit for any taps, pumps. It is manufactured for accommodating the water pressure loads. Our product is waterproof as well as the tight holding capacity includes Neutralizing axial, lateral and angular stress. Our product is Compensating for misalignment at plant start up. Our provide prompt & satisfactory services with proper maintenance. Application: Absorbs the shaking and movements of machines, pipes, pumps, engines parts and other. Reduce the noise and provide the stability of products It can be applied to the joints of pipes and etc. Accommodate the pressure loads Balancing and reduce the axial and angular stress Features: Easy installation & maintenance Compact design Both single and multiple arches are available High durability High strength Why don't you come forth and opt for this most vital product both in domestic and commercial. To know more Call us at once.
Single sphere rubber expansion joint is mainly used for reducing vibration, noise, good flexibility and easy to use.Single sphere rubber expansion join, also known as single ball rubber joint, rubber expansion joint, single ball connector ,shock absorber, pipeline shock absorber, is a kind of pipelinejoint with high elasticity, high air tightness, medium resistance and climate resistance.
Supplier: Industrial rubber products : rubber hoses, automotive rubber parts, household hand gloves, tyre retread material, rubber bridge expansion joint, general rubber products.
Services: Shipping export
Parts Standard Material Flanges Carbon Steel Tube EPDM, NBR, NR, PTFE Size 2"-12" Packaging Details Inner plastic film, outer carton case or wooden case
