Product Code: CM-01-SET-V
Installed Capacity: 850+650=1500 Watt (Double Resistance)
Supply Voltage: 220-240V ~
Frequency: 50-60 Hz.
Operating Temperature: 270 ° C
Cable: 3X1 mm² cable fireproof up to 200 ° C has been used.
Thermostat Regulation Indicator: 50-320 ° C
Resistor Material: Stainless Steel
Main Supply Cross Section: 3 x 2.5 mm² Supply Cable
Protection Class: IP 44
Main Fuse Value: 16 A (on the power connection line)
Other Remarks:
a- Three heads can be simultaneously installed on the iron.
b- The ON-OFF switch has been equipped with a light indicator for easier operation.
c- A special aluminum floor foot with a clamp has been installed providing the ability to operate everywhere.
d- The welding machine set includes heads of 20,25,32,40 mm, plastic pipe shears of 16-42 mm and other apparatuses you might need for PPRC welding.
1-Double heating elements with thermostat heating elements made of noncorrosive material.
2-Yoke foot.
3-All aparatus required for PPRC welding are available in the toolbox set.
4-1500 watt and more specific material it has.
1-Double heating elements with thermostat heating elements made of noncorrosive material.
2-Yoke foot.
3-All aparatus required for PPRC welding machine are avilable int he toolbox.
4-1500 watt and more
1-Duble heating elements with thermostat.Heating elements made of noncorosive material.
2-Yoke foot.
3- Alll aparatus required for PPRC welding machine are available in the toolbox set.
4-1500 watt
5-Guaranteed for 1 year.
6-Fibre -framed machine
7-Welding machine(capable of welding the pipe diameters up to 1,5 inch)
1-Double heating elements with thermostat.Heating elements made of noncorrosive material.
2-Yoke foot.
3-All apparatus required for PPRC welding are available in the vacuumed toolbox set.
4-1500 watt.
5-Guaranteed 1 year.
6-Fibre -framed machine.
7-Welding machine(capable of welding machine diameters up to 2,5 inch)
355 Industrial Machinery Plants Suppliers
Short on time? Let Industrial Machinery Plants sellers contact you.
1-Double heating elements with thermostat.Heating elements made of noncorrosive.
2-Yoke foot.
3-2000 watt
4-Guaranteed for 1 year.
5-Fibre framed machine(dielectric and heatproof fireproof light and shockproof)
5-Welding machine 50-125mm(capable of welding the pi diameters up to 5 inch)
Ability of simultaneous cutting the two corners of pvc and aluminum profiles at the same time.
The machine is computerized, finding the measure and cutting automatically.Has a memory for cutting by sensitivity of 0, 2mm and unit stopper.
Right head is constant and only left head is flexible.
Possibility of one head cutting when needed.
There is hydro-pneumatic system and it is possible to cut at desirable speed without vibration
Diamond saws diameter is 420 mm.
Capable of cutting at 45-90 v45 degrees and interval degrees.
Flexible head can be moved millimetrically.
Width 4000 mm
Depth 800 mm
Height 1500 mm
Voltage 400 v 3 npe
Frequency 50 hz
Total power 3.5 kw
Air pressure 6-8 bar
Air consumption 70 lt. / min
Max. Cutting profile lengths 4000 mm
Min. Cutting profile lengths 300 mm
Machine weight 800 kg
Standard machine color ral 7032
"* Power ON self-test (POST). when machine switched on , the system does full inspection and testing on welder conditions, that protect components especially key components like IGBT, diode , capacitors , circuit board, etc .
* Full functions with thermal protection , over load protection , anti-stick , arc force , VRD .
* Suitable for a wide range of voltage from 160V-260V .
* Energy saving . if the welder not in use for few minutes , the welder will automotically swtich to sleep mode . if still not use after sleep mode , the welder will swtich off automatically .
* Can be used to welder acid electrode rod and alkaline (basic ) electrode rod .
* Accessories 200A electrode holder+16mm*1.6M 200A earth clamp+16mm²*1.3* CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE
* Output cable size/length: 16mm²*1.6M 16mm²*1.3M
* DUTY CYCLE: 60%
* Usable electrode (mm): 1.6-4.0mm
*FREQUENCY: 50/60Hz
* VOLTAGE: AC 160-260V
* Output current range (A): 20-300
* POWER: 5.5KW
* CE Standard
"1.Power ON self test (POST). when machine switched on , the system does full inspection and testing on welder conditions , that protect components especially key components like IGBT , diode , capacitors , circuit board , etc .
2. Full functions with thermal protection , over load protection , anti-stick , arc force , VRD .
3. Suitable for a wide range of voltage from 160V-260V . 50-60 Hz
4. energy saving . if the welder not in use for few minutes , the welder will automotically swtich to sleep mode . if still not use after sleep mode , the welder will swtich off automatically .
5.can be used to welder acid electrode rod and alkaline (basic ) electrode rod .
Accessories 200A electrode holder+25mm²*1.6M
300A earth clamp+25mm²*Brush
6.Product power: 6.5 KW
Output cable size/length: 25mm²*1.6M 25mm²*1.3M
CABLE CORD SIZE / LENGTH:3*2.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE"
T.K. 551 - Corner Welding Machine
Makes corner welding of PVC profiles.
Full electronic and full electro-pneumatic system
Fully automatic and program controlled.
Single table movable system
Adjustable welding angles between 30 â?? 180 degrees
Digitally adjustable heating and holding times
Adjustable welding and profile pressure
Clamps the profiles one by one at each press of the foot pedal
Fault warning system.
Low energy and air consumption
Technicial Specifications
Voltage
220 V
Frequency
50-60 Hz
Total power
2,5 Kw
Air pressure
6 Bar
Air Consumption
12 lt/min
Dimensions (mm)
660 x 660 x 1420
C.K.K. 552 - Double Head Welding Machine
Welds two corners of PVC profiles
Adjustable welding pressure and profile clamping pressure.
Fully automatic and program controlled.
Has separate digital timing control for melting and cooling
Technicial Specifications
Voltage 220 V
Frequency 50 Hz
Total power 4,5 Kw
Air pressure 6 Bar
Air Consumption 70 lt/dk-min
Dimensions (mm) 890 x 4010 x 1720
Weight (Kg) 475
Exothermic welding is a molecular connection which is the most efficient way to create a high-quality electrical connection. It minimises corrosion in underground conductor connections which brings problems such as loosening and separation and maximises the life and quality of grounding.
CONCRETE BLOCKS AND BRICKS MAKING MACHINE
Type: UMPB-36/18
Capacity: 150-180 Pallets/hour
Mixture Bunker Quantity Buckets: Double Bucket (coarse-fine )
Control System: Fully Automatic
Total Power: 125 kW
Voltage: 380 V / 50 Hz
Total Weight: 27 tons
Height: 3500mm
Production capability in one press: 36 pcs. Concrete Blocks / realizes the production of 18 pieces of 20 briquettes and all border types.
Production Capacity: Minimum 150-180 pallet range in 1 hour
Products produced: series machine operates on hydraulic press and mechanical vibration principle Proper for 24 hours operation can produce any geometrical shape, concrete blocks, bordures, bricks with an height between 3 and 45 cm just by changing the mould.
Main Chassis: 200x200x10 mm closed box profile is used in the main chassis.
Mortar Silo Capacity: 2x2 m
Lower Vibrators Type: Lower vibrators are in two group with independent servo motors and with adjustable hitting power
Lower Vibrator Motor Power: 5,5 kw 4 independent servo motors
Total Motor Power: 125 kW
Upper Vibrator Motor Power: 1,7 kw x 2 units indepented motors optional at two bunker and concrete block producing machines.
Hydraulic Power: 150(200) bars
Pallette Dimensions: 140x140x5 cm
Please CALL us for our other Concrete Blocks, Briquette Machines and customer-specific solutions
Concrete Batching Plants UC 60 series compact plant contains a robust and durable chassis, double shaft mixer, weighing hopper, aggregate hopper, aggregate weighing band, transfer bucket, cement helix, air compressor. It can be easily transported, quickly installed and can serve you quickly with minimum labor. It is suitable for long-term productions and for the production of high quality concrete in your productions. Compact power plants can be operated quickly and easily as they do not need foundation and loading ramps due to their structure.
Air Compressor;
Pressure: 6-8 bar
Air Tanks: 400 Liters
Air Flow: 980
Motor Power: 5.5 kW
UC60 Compact Concrete Batching Unit Equipment:
Double Shaft Mixer
Weighing Bunker
Aggregate Bunker
Transfer Tapes
Cement Auger
Control Cabinet
PC and Automation System
Please CALL us for our other Concrete Batching Plants and customer-specific solutions
The work, whose graphic design is completed, is directed to our latest system printing machines.
In our machines that can print up to 50*70 and 70*100 paper sizes, the printing area is U.V. when necessary. It can be made
more protected by lacquer and dispersion lacquer methods.
In our machines, which can print from 1 color to 6 colors at the same time, it is possible to print on the inner surface as well as the outer surface.
The work, whose graphic design is completed, is directed to our latest system printing machines. In our machines that can print up to 50*70 and 70*100 paper sizes, the printing area is U.V. when necessary. It can be made more protected by lacquer and dispersion lacquer methods. In our machines, which can print from 1 color to 6 colors at the same time, it is possible to print on the inner surface as well as the outer surface.
355 Industrial Machinery Plants Suppliers
Short on time? Let Industrial Machinery Plants sellers contact you.
