1-Double heating elements with thermostat heating elements made of noncorrosive material.
2-Yoke foot.
3-All aparatus required for PPRC welding machine are avilable int he toolbox.
4-1500 watt and more
The MF 22 is equipped with a tried-and-tested ceramic-ring setting system, available optionally as a 1, 2, 3 or 4-container system, each with a 22 liter container. Special versions, for instance, such as 6 to 8-container systems are also feasible. Features a modular design ideal for processing precision components. Easy handling, trouble-free operation. Width = 58 cm Depth = 99 cm Height = 149 cm 22 Liters 110 kg 0,85 kW 230 Volts.
Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1. 10:1 compaction Improves security and safety Low on noise, low on energy Air-powered, clean and hygienic Fixed frame unit & sliding wagon Suitable for kitchens & offshore environments Compact general, kitchen and hazardous waste Product Overview The Mil-tek X-Press 300 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 300 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. The fixed frame unit and sliding wagon allows the X-Press 300 to be securely bolted in place making it ideal for shipping, offshore environments or uneven surfaces.The Mil-tek X-Press 300 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 300 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Machine size Height (mm) : 1850 Width (mm) : 670 Depth (mm) : 1155 Weight : 107 kg Bag height (mm) : 600 Bag diameter (mm) : 450 Weight of full bag :
The E319 Cardboard & Plastic Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a steady stream of cardboard and plastic waste and packaging. High compaction pressure Electric: almost silent running 57 dB (A) Electric: no hydraulic oil Plug'n'Press: modern control system Constant Pressure: Locks pressing plate in place Safe and easy built-in bale ejection Product Overview The Electric E319 is a quiet-running electro-mechanical baler. Featuring a spindle-driven pressing plate, the E319 quietly compresses material with up to 15 tonnes of pressing force.Suitable for cardboard, plastic and other recyclable material, the E319 has a modern control system to start the machine and activate the pressing cycle. The pressing plate has a constant pressure feature, which locks the pressing plate in place to further compact material, without any additional electrical use. The E319 electric baler features a magnetic safety switch and inductive sensors, additionally, customized functions can easily be switched on/off. This unique construction allows for the smaller height, while still featuring a large feed opening and heavy bale weight.As it is powered by electricity, without using hydraulics, the E319 baler is suitable for locations that do not already have a source of compressed air. The lack of hydraulics mean that the E319 operates quietly, without interfering with the natural workflow, and can be located in hygiene sensitive areas. At just 1.85 metres high, the E319 electric baler has a low working height and can be installed in most locations with relative ease. Machine size Height (mm) : 1855 Width (mm) : 1165 Depth (mm) : 770 Weight ; 500 kg Bale size : Height (mm) : 800 Width (mm) : 500 Depth (mm) : 900 Bale weight : Plastic:
The AutoStrip Max: Powerhouse for Thick Wire Processing The AutoStrip Max 70mm Wire Cutting and Stripping Machine is a game-changer for handling thick wires. This advanced machine boasts superior processing power, user-friendly features, and exceptional versatility, making it ideal for various industrial applications. Intelligent Control and Efficient Operation: Advanced Processing Power: The cutting-edge 64-bit intelligent control system ensures efficient and precise wire processing. User-Friendly Touchscreen: The intuitive touchscreen interface simplifies operation and allows for easy storage and retrieval of hundreds of data sets for frequently used settings. Designed for Thick Wires: Broad Wire Compatibility: Process a wide range of wires, including electronic wires, new energy wires, automotive power distribution box cables, BV, BVR, PVC, and more. Large Cutting Capacity: Handles thick wires with a core area of 2.5mm to 70mm, perfect for industrial applications. Customizable Processing: Set precise cutting and stripping lengths to meet your specific needs. Technical Specifications: Model: JT-507 Dimensions: 600mm x 550mm x 480mm Weight: 68kg Display: 7-inch Touchscreen Power Supply: AC175V-250V, 50/60Hz Power Consumption: 880W-1280W Cutting Length: 0.1mm-99999.9mm Stripping Length: Head: 0.1-300mm, Tail: 0.1-120mm Cutting Core: 2.5mm - 70mm Cutting Tolerance: 0.002 x L mm Intermediate Stripping: 13 positions (can be added) Conduit Diameter: 6mm-19mm Tool Material: Tungsten Steel/Imported High-Speed Steel Drive Mode: 8-wheel Drive Wire Stripping Rate: 800-2000 strips per hour (adjustable) Wire Pressure Adjustment: Manual Pulley Adjustment Pulse Equivalent: 1 pulse = 1 step In-line Error: 0.02mm Blade Motor Accuracy: 0.1mm per step (Silent Hybrid Stepper Motor) Additional Features: Automatic outgoing line, automatic incoming line, timing start The AutoStrip Max is a powerful and versatile solution for thick wire processing. This intelligent machine with its user-friendly features ensures efficient, precise, and professional results, making it a valuable asset for various industrial applications.
Introducing the JT-501: Your High-Volume Wire Processing Solution The JT-501 automatic dual wire stripping machine is a game-changer for high-volume wire processing. This versatile machine tackles a wide range of wires, delivering efficiency and precision for various applications. Intelligent Control and User-Friendly Design: Smart Operation: The cutting-edge 32-bit intelligent control system simplifies operation with a user-friendly touchscreen interface. Store hundreds of settings for quick retrieval, saving you time and setup hassle. Wide Wire Compatibility: Handles a variety of wires, including electronic wires, PVC wires, braided wires, silicone wires, high-temperature wires, Teflon wires, and insulated wires. Adjustable Precision: Achieve accurate results with adjustable cutting and stripping lengths to meet your specific needs. Boosting Productivity: High-Speed Processing: Process 3000-5000 wires per hour, ideal for large-scale production environments. Compact Footprint: The compact design saves valuable workspace. Enhanced Efficiency: Additional features like automatic shutdown, wire infeed/outfeed, and timing start streamline your workflow. Technical Specifications: Model: JT-501 Dimensions: 420mm x 345mm x 297mm Weight: 28kg Display: 4.3-inch Touchscreen Power Supply: AC175V-250V, 50/60Hz Power Consumption: 120W-220W Cutting Length: 0.1mm-99999.9mm Stripping Length: Head: 0.1-50mm, Tail: 0.1-30mm Cutting Core: 0.1-2.5mm Cutting Tolerance: 0.002 x L(mm) Intermediate Stripping: 13 positions Conduit Diameter: 1.5mm-9mm Tool Material: Tungsten Steel/Imported High-Speed Steel Drive Mode: Four-wheel Drive Wire Stripping Rate: 3000-5000 strips per hour (adjustable) Wire Pressure Adjustment: Manual Pulley Adjustment Pulse Equivalent: 1 pulse = 1 step In-line Error: 0.02mm Blade Motor Accuracy: 0.03mm per step Inlet and Outlet Motor Precision: Silent hybrid stepper motor (0.1mm per step) Additional Features (Optional): Automatic shutdown due to lack of wires, automatic outgoing wires, automatic incoming wires The JT-501 is a powerful solution for high-volume wire processing. Its intelligent control system, user-friendly design, and efficient features make it ideal for various applications, ensuring accurate and productive results.
The New Mil-tek Xp100s Long Cylinder Waste Compactor is a Small, Stainless Steel Waste Press Ideal for Compact, Clean Locations Such as Kitchens. The Long Cylinder Increases the Level of Compaction Within a Small Footprint Area. Long Cylinder Fits 240 Litre Bins Stainless Steel Frame Small Footprint (52 Cm2) Densely Compacted Waste Reduced Energy Consumption Suitable for Kitchens & Food Preparation Areas Product Overview The Mil-tek X-press 100 Long Cylinder Waste Compactor is a Small Size Waste Compactor Suitable for a Variety of Locations Including Kitchens, Small Cafes, Food Preparation Sites, Hospitals, Offices, and General Waste Areas.the Stainless Steel Waste Press is Small Enough to Be Installed Indoors and in Clean, Working Environments. It is Free From Oil or Other Contaminants. With a Footprint of Less Than 52cmâ², the Xp100s Waste Press Can Easily Be Added to Working Environments Such as Food Preparation Areas, Creating a Seamless Waste Disposal Process and Minimizing Any Time Wasted Transporting Waste.the Long Cylinder of the Xp100s Waste Press Compacts Waste More Densely With Each Cycle, Creating Densely Compacted Bags of Waste Up to 50 Kg in Weight. The Long Cylinder Also Uses Less Power With Each Stroke, and Can Run on as Little as 2 Bars of Pressure. Compacted Waste From an Xp100s Can Easily Be Transported Using a Mil-tek Lift Trolley. Using a Lift Trolley, Waste Bags Are Slid From the Wagon to the Lifting Plate, Winched Up and Pushed Into Waste Bins, Eliminating the Need for Heavily Lifting. Machine Size Height (Mm) : 1970 Width (Mm) : 670 Depth (Mm) :704 Weight : 120 Kg Bag Height (Mm) : 600 Mm Bag Diameter (Mm) : 450 Mm Weight of Full Bag :
Ideal for small spaces and indoor environments, the X-Press 200S compactor is tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1. Stainless steel 10:1 compaction Improves security and safety Low on noise, low on energy Air-powered, clean and hygienic Suitable for kitchens & offshore environments Product Overview The Mil-tek X-Press 200S stainless steel waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200S waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200S is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200S is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Machine size Height (mm) : 2025 Width (mm) : 810 Depth (mm) : 779 Weight : 150 kg Bag height (mm) : 600 Bag diameter (mm) : 570 Weight of full bag :
Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1. 10:1 compaction Improves security and safety Low on noise, low on energy Air-powered, clean and hygienic Compact general and hazardous waste Suitable for kitchens & offshore environments Product Overview The Mil-tek X-Press 200 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Machine size Height (mm) : 1825 Width (mm) : 830 Depth (mm) : 800 Weight : 135 kg Bag height (mm) : 600 Bag diameter (mm) : 570 Weight of full bag :
DFI Series Digital Force Gauge is our latest microprocessor digital indicator gauge. It has inputs both for dynamometers (force) and load cells (weight) strain gauges. It is ideal to be used in the most innovative static and dynamic measurement systems such as material testing machines, printing machines, test benches and automation. Thanks to its ??0,02% accuracy DFI can be used in quality systems as first or second line sample item if regularly calibrated by SIT centre. The measurement system is made up of an analog section particularly stable at long term, of a carryng frequency feeder which lowers the system thermal drifts and of a 16 bit A/D converter which guarantees 65.000 internal divisions. In order to increase the integration level of the components a traditional mixed tecnology and SMT has been adopted to make the indicator resistant to any kind of vibration and mechanical stresses besides granting the highest reliability of the circuit. The internal batteries guarantee 1 year autonomy also thanks to the AUTO POWER OFF function which activates when any measurement change is detected within 30 minutes. The indicator is equipped with a setting menu which allows to choose the most suitable type of engineering measurement units (kN, daN, lbs, t, kg), the resolution and the digital filter according to the measurement to be calculated. The display also shows a bar analog indication which is operating inside the setting menu too. When the instrument is working in compression mode, SP1 icon is alight; when it is working in tension mode, SP2 icon is alight. Main characteristics: • PROGRAMMABLE RESOLUTION • PROGRAMMABLE DIGITAL FILTER • PROGRAMMABLE BAUD RATE • ZERO FUNCTION • PEAK FUNCTION (positive and negative) • RS232C SERIAL OUTPUT (on request) • DIGITAL FILTER ALLOWS TO AVERAGE UNSTEADY or PULSATING FORCE. Main Specifications: BATTERY LIFE:1YEAR(200HRS) Shown:Actual Size Total Length 7.5” Sensor Thickness:11/16” Range for Nominal Load : 0 to 4.500lbs and 0 to 9,lbs Resolution: 0.01 Accuracy Class:less than +/-0.5% Linearity:less than +/-.20%FS Hysteresis: less than +/-.20%FS Repeatability:less than +/-.05%FS Readings per sec.(0 filter):10(100ms) Display:Custom LCD(H=5/8“ Mechanical Limit: Service Load:120%FS Max Permissible Load:150%FS Breaking Load>300%FS Displacement at Nominal Load:0.007“