GENERAL FEATURES
- Nano ceramic, electrostatic epoxy polyester powder metal parts
- 36 turning casters with cross lock feature
- Telescopic aluminium board
-Height adjustment controlled by gas spring
- Compatible with cabinets and beds
-Color options - sticker
-Top table 6 mm HPL
GENERAL FEATURES
- Electrical adustment of backrest, footrest, fowler position height adjustment, trendelenburg and reverse trendelenburg positions.
- Remote Control Panel
- Mechanical CPR(Just for Backrest) and Electric CPR
- Rastomat mechanism (Gradual angle adjustment of calf section)
- Four-piece HPL lying surface
- Headboard&footboard removable, side rails are foldable made of polypropylene.
- 360 turning swivel casters equipped with central and directional lock(150 mm)
- Drainage bag holder hooks.
- Holes for accesories in corners.
- Plastic bumpers in corners
- 11cm mattress compatible with lying surface of the bed
- X-Ray transparent lying surface
-Metal parts coated with zinc phosphate and vanished
- Nano ceramic, electrostatic epoxy polyester powder metal parts
-Back up battery
- IPX4 protection
-Angle indicatrs on the side rails.
-2 colomn and 2 linear motors.
OPTIONAL FEATURES
-Availability of headboard, footboard and side rails stickers with different colors.
- Lockable head/foot board.
-Foot extension.
- Remote control.
- Battery
-File holder.
GENERAL FEATURES
-Stainless steel main frame
- Height adjustable and stainless steel IV Pole
- Foldable and adjustable foot part
- 360 turning wheels
- Central Brake system in rear wheels
- Drainage back holder hooks on both sides
-Safety Belt
GENERAL FEATURES
- Metal parts coated with zinc phosphate and varnished with electrostatic epoxy polyester powder
- DC motors protected from over current and that need no lubrication
- High strength hinges made of composite materials
- Minimum IPX4 protection
- Castors capable of turning 360
- Electronic adjustments of backrest, height-up&down, Trendelenburg, Reverse Trendelenburg positions by using Remote Control Unit
-Remote control Unit
-Equipped with powerfull column motors
-Gynecological leg supports
- Removale footboard made of ABS plastic
- ABS plastic covered lower chassis
- Chrome-Nickel coated accessories against corrosion
-Towel rail for paper towel
-Easly removable chrome nickel material waste bowl
- Back up battery for non-stop operation in case of power failure
- Leakage currents & ground fault protection
OPTIONAL FEATURES
- Foot support.
-Birthing bar.
- Coating with different color.
- Pedal control panel.
33 Hospital Furniture Suppliers
Short on time? Let Hospital Furniture sellers contact you.
GENERAL FEATURES
- Electrical adjustment of backrest, legrest, height-up & down, Trendelenburg, Reverse Trendelenburg, Cardiac and Fowler positions
- Nurse Control Panel
- Side Rail Control Panels (Inside & Outside)
- Mechanic and Electronic CPR
- Rastomat Mechanism ( gradual height adjustment of calf section)
- 4- piece, HPL lying surface
- Headboard & footboard removable, side rails are foldable and Head/Foot boards and side rails made of polypropylene
- 360 turning swivel casters equipped with central and directional lock (150mm)
- Plastic bumpers in corners
- Drainage bag holder hooks
- Holes for accessories in corners
-Height Adjustable IV Pole
- 11 cm thickness mattress compatible with bed lying surface
- X-ray transparent lying surface
- Nano ceramic, electrostatic epoxy polyester powder metal parts
- Back up battery for non-stop operation in case of power failure
- Backrest regression
- Minimum IPX4 protection
- Angle indicators on the side rails
- Two-piece, ABS plastic bottom part cover
- 2 colomn and 2 linear motors
OPTIONAL FEATURES
-Availability of headboard, footboard and side rails stickers with different colors.
-X-ray cassette holder.
- Lockable head/foot board.
- Foot extension.
- Patienet weighting system.
- Remote control.
- 5th Caster.
- Light under bed.
- File holder.
GENERAL FEATURES
-Side panels and top table made of polypropylene
-Durable main frame made of aluminum
- 360 turning 4 wheels, 2 of which has cross lock to stabilize the trolley
-Seal system for central locking drawers
- Disposal bin made of ABS material
-Nurse writing table
- Dividable inner drawers
-5 drawers with following dimensions;
- 2 pcs 445x545x70mm,
- 2 pcs 445x545x160mm,
-1 pc 445x545x250mm
-Self-closing and telescopic sliding rails for drawers
- Forward dropping medication boxes attached on top
GENERAL FEATURES
-Electrical adjustment of backrest,leg rest,height-up&down,and Fowler positions
-Manual adjustment of Trendelenburg positioon by gas spring
-Side Rail Control Panel
-Mechanic CPR
-Ratomat Mechanism (gradual height adjustment of calf section)
-4-piece,HPL lying surface
-Removable headboard&footboard,foldable side rails made of polypropylene
-360 turning caasters with cross lock (125mm)
-Plastic bumpers in corners
-Drainage bag holder hooks
-Holes for accessories in corners
-Height Adjustable IV Pole
-11 cm thick mattress comtible with bed lying surface
-X-ry transparent lying surface
-Nano ceramic,electrostatic epoxy polyester powder metal parts
-Backrest regression
-Minimum IPX4 protection
-Angle indicators on the side rails
-3 linear motors
GENERAL FEATURES
- Nano ceramic, electrostatic epoxy polyester powder metal parts
- Easy clean and compact four-piece sheet metal lying surface
- Single button collapsible side rails
- Plastic bumpers in corners
- Drainage bag holder hooks
- 360 turning casters with cross lock (125mm)
- Backrest, footrest and Fowler position adjustment by cranks (by model)
- 11 cm thick mattress compatible with bed lying surface
-Side rails made of metal profile and Detachable Head/Foot boards made of polypropylene
OPTIONAL FEATURES
-Availability of headboard, footboard stickers with different colors.
-HPL lying surface.
-Rail handle.
- Filde holder.
GENERAL FEATURES
-Nano ceramic, electrostatic epoxy polyester powder metal parts
- Easy clean and compact four-piece sheet metal lying surface
-Single button collapsible side rails
- Plastic bumpers in corners
- Drainage bag holder hooks
-360 turning casters with cross lock (125mm)
- Backrest, ,adjustment by cranks (by model)
-11 cm thick mattress compatible with bed lying surface
-Side rails made of metal profile and Detachable Head/Foot boards made of polypropylene
OPTIONAL FEATURES
- Availability of headboard, footboard stickers with different colors.
-HPL lying surface.
-Rail handle.
-Filde holder.
GENERAL FEATURES
- Nano ceramic, electrostatic epoxy polyester powder metal parts
- Easy clean and compact four-piece sheet metal lying surface
- Single button collapsible side rails
- Plastic bumpers in corners
- Drainage bag holder hooks
- 360 turning casters with cross lock (125mm)
-Backrest, footrest and Fowler position and height regulation, adjustment by cranks (by -model)
-11 cm thick mattress compatible with bed lying surface
- Side rails made of metal profile and Detachable Head/Foot boards made of polypropylene
OPTIONAL FEATURES
- Availability of headboard, footboard stickers with different colors.
- HPL lying surface.
-Rail handle.
- Filde holder.
GENERAL FEATURES
-Main frame made of metal or HPL
-ABS or HPL top table with protections on the edges
-Rotatable and foldable side table made of HPL with height adjustment by gas spring
-Two drawers equipped with self closing slides and inner plastic covers
-Shelf in the middle
-Shelf in the bottom for shoes
-360 turning casters with cross lock
-Drawers doors are made of HPL
-Aluminum profiles in corners
GENERAL FEATURES
- IV pole's compressed height is 1085 mm; fully extended height is 1940 mm
- Casters with cross locking and capable turning 360
- Metal parts covered with nickel
- Manual height adjustment
- Four-piece hook IV Pole made of plastic
- Easy movement with 5 wheels
Epoxy coated steel structure
Synthetic leather covered
Manual adjustment of backrest, footrest and trendelenburg positions
Stainless steel waste bin
Height adjustable leg support
Holding handles
Escabo for easy movement of patient
Paper roll holder
Height adjustable iv pole
Size: 50x168x85 cm
Four section bed platform made of epoxy coated steel sheet with ventilation holes
Mechanical adjustment of back & footrest
Trendelenburg adjustment by gas spring
Fold down side rails
IV pole sockets in four corners of the bed
Easily removable Polyp head & foot boards
125 diameter swivel lockable castors
Protective corner bumpers
Epoxy coated steel
Iv pole holder in bed corner
Companion bed on castors
Cabinet with one drawer and cupboard
Size: 195x75cm
Mattress size: 140x70x15cm.
33 Hospital Furniture Suppliers
Short on time? Let Hospital Furniture sellers contact you.
