Find Verified Miscellaneous Suppliers, Manufacturers and Wholesalers

EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD.

Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world.

EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland.

The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives).

The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe.

Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.

D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names.

Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400.

Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.

3 Layer, Fully Ultrasonic, Nose Wired Surgical Face Mask

Bactery Filtration : 99,2% (EN-14683 + AC 2019 Eurolab Test Report Result)

Inner Layer: 20 gr/m2 PP Spunbound Fabric (Nonwoven)
Middle Layer: 25 gr/m2 PP Meltblown Fabric (Nonwoven)
Outer Layer: 30 gr/m2 PP Spunbound Fabric (Nonwoven)

Measurments : Length: 175 mm (+/- 5 mm) | Width: 95 mm (+/- 5 mm)
Nose Clip : Material: Stainless Plastic Covered Wire | Length: 95 mm (+/- 5 mm)
Ear Band : Length: 170 mm (+/- 5 mm) | Width: 2 mm.
Colors : White, Blue, Green (Mask colors can vary depending on the fabric color)

N95 Respirator Surgical Mask
Direct deal from Title Holder
SGS report for 2 billion units is available
SGS inspection for 1 billion units is ongoing
CIF Worldwide Price list as belo
10 million to 99 million 2.50$ + 10%
100 million to 299 million 2.30$ + 10%
300 million to 499 million 2.20$ + 10%
500 million to 999 million 2.15$ + 10
1 billion to 3 billion 2.05$ + 10%
50% of commission is open for buyer intermediaries and buyer mandate
SOP
o NCNDA, LOI, LOA, ICPO and IMFPA
After due diligence, zoom call between direct Buyer and Seller
A2A (SGS Report & Lot number against BCL/MT199)
SPA
Escrow Agreement
Escrow accounts in London and USA (HSBC, CITIBANK, JP Morgan)
Buyers SGS Inspection in loading port
Payment release from against SGS report and shipping documents
Origin of goods is USA and Germany

sterile or non sterile 3 ply mask

OTG USA (LA, MIAMI) Cardinal Flexall Nitrile Powder-free Exam Gloves FLEXAL Nitrile exam gloves.

Cardinal 500m $15.75 Including 10%
Cardinal 1B $15.75 Including 10%
Cardinal 5B $14.75 Including 10%
Cardinal 10B $14.00 Including 10%
Cardinal 20B $13.75 Including 10%
Cardinal 50B $13.00 Including 10%
Cardinal 100B $12.75 Including 10%
Cardinal 500B $12.14 Including 10%

ANKA with more than 20+ years of experience.
ANKA Medical PPE Solutions providing professional service for your all PPE products needs.

If you do not want to waste your time for an unreliable source,


At ANKA Medical PPE Solutions, we guarantee rapid, reliable and responsive solutions for your PPE needs.

Key Specifications/Special Features:Model Number:3 ply non woven face mask ultrasonic printed
Brand Name:Hatif Medical
Origin:Turkey
Key Specifications/Special Features:
Disposable 3 ply mask box packaging with Certificate Disposable three-layer mask
The filtering effect is greater than 95% Three-layer meltblown cloth CE, EN, ISO certification
Packing:2500pcs/ctn,54*42*45cm/11kg
Lead time :every day 5 million pcsDisposable 3 ply mask:
box packaging with Certificate
Disposable three-layer mask
The filtering effect is greater than 95%
Three-layer meltblown cloth
CE, EN, ISO certification
Packing:2500pcs/ctn,54*42*45cm/11kg
Lead time :every day 5 million pcs

PRODUCT INFORMATION

3 Layers OfProtection

1-Direct Contact Skin Layer, Soft Fiber
2-High density filter ply(MELTBLOWN) comfortable and provides excellent breathability
3-Leak proof non-woven fabric

FABRIC WEIGHTS 25 GR/20 GR/20 GR TOTAL 65GR
ALSO WE HAVE DIFFERENT WEIGHTS AS 30GR/25GR/30GR
PRODUCT SIZES 18X9 CM
50 UNIT/PACK

THERE ARE 2 OPTIONS OF BOXES
1-60X50X50 3.750 UNIT/75 PACK
2-60X50X40 3.000 UNIT/60 PACK

99.2% FILTERING 3 PLY MASK - TYPE IIR
Medical & Surgical 3 ply face mask.
Non woven material, latex free
1st ply, outside 25 gsm water blocking nonwoven
2nd ply, 35 gsm meltblown filter
3rd ply, inside 25 gsm spunbond
- ultrasonically welded latex free ear loops
- mask size 17.5 x 9.5 cm
Technical features:
BFE% = 99.2
Differential pressure (Pa/cm2) = 44.1
CfU/g = 24
Splash resistance (kPa) = 21.3
ISO 13485, 93/42/EEC guideline, Norm EN 14683:2019 & ASTM F2100:19, Type IIR