COLOUR COATED PRODUCTS Colour coating of coils means continuous applying of paint to flat steel strip (rolled in a coil shape) with polyurethane rolls using high-tech automation. Colour coated strip is continuously produced on the line as described in the below steps. Coils are opened, top and back surfaces of the strip are cleaned (by applying a special chemical agent and rinsing it off), chromated (an operation to increase the corrosion resistance and to enhance the paint adherence). After that the strip passes through the oven, and the primer is applied to it (paint is applied only to top surface, while back surface is covered with high adhesive polyurethane back coating paint). Thereafter, the strip passes through another oven. If colour coating is requested over the primer on both sides, the paint is applied as the last layer and the strip is dried in the furnace. Depending on the customers request, protecting film may be applied, and the colour coated strip is rolled in a coil and packed.
NATURAL ALUMINYUM PLAIN COILS AND STRIPS DIMENSIONS Alloy : 1XXX, 3003, 3005, 3103, 3105, 5005, 8XXX Temper : H0, H1X, H2X, H3X, DDQ Thicknes : 0,20mm - 3,00mm Width : 500mm - 2200mm PAINTED ALUMINYUM DIMENSIONS Paint Type : Polyester, PVDF Colours : Ral Colours Alloy : 1XXX, 3003, 3005, 3103, 3105 Temper : H1X, H2X, H3X Thicknes : 0,30mm - 1,00mm Width : 300mm - 1500mm
Having passed Hot Strip Mill and Continuous Pickling Line, after rolling on Cold Reversing Mill (CRM), full hard products with surface quality and thickness (0.25-2.00 mm) suitable for further processing on HDGL are produced. Zinc coating is applied by continuous annealing followed by immerging of the strip into zinc pot on Hot Dip Galvanizing Line (HDGL) To protect the surface of galvanized products from corrosion, chemical passivation and protective oil may be applied. Products with thickness ranging between 0.25-3.00 mm and width ranging between 800-1530 mm may be produced on Hot Dip Galvanizing Line.
Steel like GI GL, PPGI PPGL, CR, HR, HRP, ALU..Export
Galvanised steel, cold rolled steel, hot rolled steel.
Hot rolled coils, cold rolled coils, galvanized coils/sheets, aluzink coils, prepainted steel coils, wire rod, re-bar, billets, slabs.
Steel coils, color coated steel, trapeze sheet.Shipping, logistics
Fin Tube Heat Exchangers, Air Cooled Condensers, Cold Room Evaporators, Dry Coolers, Heater Cooler Coils, .
Steel section, wire, pipe, coils and plates.
Copper scrap, birch cliff, milberry, aluminum, brass.
Steel Coil, Steel Coil Sheet, Steel Coil Plate, Hollow Sections, Tubes And Pipes (hr, Cr, Galvanized, Galvalume)..
Hrp, cr and galvanized steel as coil, strip and sheet, roofing sheets.
Stainless Steel, Galvanized Sheet Metal, Steel Wire, Straight Razor Wire .
Steel profiles & carbon steel welded tubes.Manufacturing & exporting worldwide
Prepainted Steel, Prepainted Aluminum, Aluminum Coil, Galvanized Steel, Cold Rolled Steel, Sliting Steel, PPGI, HDGI, CCR, Corugated Steel, Trapezoidal Steel, Sandwich Panels, Roof Panels, Wall Panels, Cold Room Panels.Steel Service Center, Solition Partner And Supply Center.
Butterfly valves, ball valves, diaphragm valves, plug valves, check valves,strainers, pipes and fittings, actuators.
Industrial Pipes, Rectangular Hollow Sections, Square Hollow Sections, Pre Galvanized Steel, Tubes & Hollow Section, Hrc Hot Rolled Steel Coils, Crc Cold Rolled, Steel Coils,hot Rolled Steel Sheets, Galvanized Steel Coils And Sheets, Cold Rolled Steel Sheets, Oval Profiles, Tz Profiles, Open Profiles, Slitting Line,.
Hot rolled sheets, cold rolled sheets, slit sheets, plate sheets.
Hard copper alloy with high thermal conductivity and high mechanical properties combined with good hardness and high temperature strength. Cupro CNB Areas of Applications : Spot welding electrodes and seam welding discs for stainless steel, Monel and nickel alloys, Flash welding dies, wire mesh electrodes, Plastic blow and injection moulds and inserts in steel tools for higher cooling rates, Nozzles and needles for hot runner systems, Plunger tips in aluminium die casting machines, Moulds for non-ferrous metal castings (as copper, brass, bronze), Welding tools in plastic packaging Code: DIN 17666 W. Nr. 2.1285, EN: cw 103C, AFNOR: UK2Be, USA CDA: C175000 RWMA: CLASS3
Hard copper alloy with high thermal conductivity and high mechanical properties combined with good hardness and high temperature strength. Good resistance to tempering. Nitriding and case-hardening are not suitable. Cupro CB (CuCo2Be) Areas of Application : Spot welding electrodes and seam welding discs for stainless steel, Monel and nickel alloys, Flash welding dies, wire mesh electrodes, Plastic blow and injection moulds and inserts in steel tools for higher cooling rates, Nozzles and needles for hot runner systems, Plunger tips in aluminium die casting machines, Moulds for non-ferrous metal castings (as copper, brass, bronze), Welding tools in plastic packaging, Code: 2.1285 (CuCoBe) DIN 17666, USA CDA C17500, RWMA:Class3