Istanbul Turbines Generator Transformers Tg Auxiliaries Non Destructi Suppliers and Manufacturers

Used 4.5 MW Back Pressure Steam Turbine for sale; Year of Manufacture: 2005 Year Retired : 2012 Condiotion: Excillent Operating Hours: 17.092 Status:Installed on foundation Generator; Apparent Power: 5.625 kVA Active Power: 4500 kW Power Factor: 0.8 Speed: 1.500 rpm Frequency: 50 Hz Steam Turbine; Inlet Flow Most Economical: 2400 kW Inlet Pressure Rated: 44.5 Bar Inlet Temperature: 360 oC Rating Max. Cont.: 4700 kW Rated Speed: 10.043 rpm

Ups, generators, regulators, transformer, battery charger, power supply.

Stell bar, rebar, hardware, pvc/ galvanized/pprc pipes, generators, ups, transformes, electric materials, hand toolls, scaffolding, prefabrics, valves, pumps, sanitaryware, ceramics, flooring.

AngelMask Approved 3 Ply Non-Woven Medical Face Mask with Ear Loops General purpose, splash resistant, pleated disposable 3 ply medical face mask with elasticized ear loops. 3 Layers, made from soft, breathable material: two layers of soft non-woven cloth and one layer of bacterial filtration material, which provides good barrier. protection and low breathing resistance. Can be used in hospitals, food packaging industries, laboratories, clean rooms, daily protective areas, etc. Face Mask 3 Layer 100% Cotton. Fiberglass Free Latex-free and non-allergenic Anti-dust, un-reusable Anti-Bacterial Non irritating Universal size fitting (One size fit all), One size fit most, easy on and off, easy carrying. Multi-use: Flu/virus protection, dust protection, general maintenance Extremely high 99% Bacterial Filtration Efficiency (BFE) Breathable, hypoallergenic and sterilized Easy to use elastic ear loop design for comfort and protection Covers the nose, mouth and chin for full protection Fluid resistant Mask Color: Light Blue and white available Eco-Friendly safety dust mask for both women and men.This product is manufactured in the Turkey Mask Size: 175mm x 95mm Box Qty: 50 Masks/Box and 10 mask/ Pack

AngelMask Approved 3 Ply Non-Woven Medical Face Mask with Ear Loops General purpose, splash resistant, pleated, disposable, 3 ply medical face mask with elastic ear loops. Made from soft and breathable material: two layers of soft non-woven fabric and one layer of bacterial filtration fabric which provides excellent barrier, protection, and low breathing resistance. Can be used in hospitals, food packaging industries, laboratories, dust protection, rooms cleaning, general maintenance, daily protective areas, etc. Outside: Non-woven fabric (Customizable) Middle Layer: Pure filtration fabric (Customizable) Inside: Skin-friendly composite non-woven fiber (Customizable) Layer Filter Protection 3 PLY filtration layers purifying airborne particles, dust, and toxic gases in the air. Skin-friendly material that gives you multiple layer protection against allergens, droplets, dust, etc. Our surgical masks keep you safe from bacteria, germs, droplets, allergens, pollen, and harmful substances in the air. Protect your health! This Fluid repellent face mask can be used all over the year and in any weather which keeps you safe from smog, dust, smells, vehicle exhaust, air pollution, and humidity; thus keeping you healthy. Bacterial Filtration Efficiency (BFE): With a bacterial filtration efficiency (BFE) of greater than >99% this mask provides superior protection from potential infection. Particulate Filtration Efficiency (PFE): The super high Particulate Filtration Efficiency (PFE) material filters >95% of particles greater than 0.1 microns. When securely fitted, the mask helps provide an effective barrier to infections.

Medical mask production line : SPECIFICATIONS: - Production capacity: 120 masks per minute. - Non-woven ultrasonic mask machine - Production of a 3-layer mask - The line consists of 2 parts: 1) For the production of the mask itself. 2) Rubberizer - The conveyor automatically feeds the mask blanks and, cutting off the desired length of the elastic band, solders it to the blank. - Welding is done by ultrasound. - Voltage: 220V, 1F - Electric power: 8.1 kW - weight: 1300 kg - Size: 1600x7000x2000 mm - 1 year warranty - Price: 95,000 EURO - FOB ISTANBUL Notes: - The machine can work 24 hours, without a break. - Periodic maintenance once every 6 months and general maintenance performed once a year. - Since this machine is made of steel structure, maintenance is sufficient, as we said above. - Number of operators: 1 person / machine - We provide 1 year warranty for the electronic part and 2 years for the mechanical parts. - The production line is 45 days after receiving the order. The main raw materials for medical masks are: Non-woven material (spunbond, meltblown spanbond and other filter materials based on non-woven). Ear loop-elastic. Nasal locking wire (plastic thread).

Medical mask production line : SPECIFICATIONS: - Production capacity: 120 masks per minute. - Non-woven ultrasonic mask machine - Production of a 3-layer mask - The line consists of 2 parts: 1) For the production of the mask itself. 2) Rubberizer - The conveyor automatically feeds the mask blanks and, cutting off the desired length of the elastic band, solders it to the blank. - Welding is done by ultrasound. - Voltage: 220V, 1F - Electric power: 8.1 kW - weight: 1300 kg - Size: 1600x7000x2000 mm - 1 year warranty - Price: 95,000 EURO - FOB ISTANBUL Notes: - The machine can work 24 hours, without a break. - Periodic maintenance once every 6 months and general maintenance performed once a year. - Since this machine is made of steel structure, maintenance is sufficient, as we said above. - Number of operators: 1 person / machine - We provide 1 year warranty for the electronic part and 2 years for the mechanical parts. - The production line is 45 days after receiving the order. The main raw materials for medical masks are: Non-woven material (spunbond, meltblown spanbond and other filter materials based on non-woven). Ear loop-elastic. Nasal locking wire (plastic thread).

Covers a piston displacement of 120 lt/min to 14.400 lt/min. Fields of use > textile industry > construction industry > beverage industry > tyre industry > pneumatic industry > maritime Related applications > painting > transfer with compressed air > pet blowing > tyre inflation > pneumatic transfer > silobus > deep water wells > ships and power generators Superior characters of piston air compressors > full automatic > designed to operate for long hours > simple and balanced constructions > effective cooling with abundant air supplied by wide cooler blades on pulley and cylinders with wide blades > ball- and pin-bearings that minimize mechanic friction > simple and effective lubrication > balanced on rotational parts > valve system that minimizes the dead volume > domestic production, abundant spare parts > extensive technical service network > 2 years of warranty Working principle of piston air compressors Piston compressors compress and store free air. Head group is driven by the electrical motor via a v-belt and crank movement ensures a reciprocating movement of pistons. Piston creates a vacuum when lowering down from a top point. The vacuum created, opens the suction valve and ensures that air is filled into cylinder. When piston starts rising again, the suction valve is closed and opens the valve on outflow line and thus starts the compression process. The compressed air passes over the pipe lines and reaches in the non-return valve. Non-return valve ensures that air receiver tank is filled without returning the air fed to the tank. Meanwhile, while piston compresses the air, it expands and heats up. The components which are heated via the fan blades in head group, blow the air sucked and thus ensure cooling.

Food, Non Food Product.

HTV and LSR silicone. Silicone materials like silicone cables, tubes, medical tubes, gaskets for industry and silicone kitchenware for homes.

All in one type low-medium-high intensity light incorporates infrared that makes it completely night vision goggle compatible obstruction light. It is maintenance-free, complying ICAO and FAA international standarts. This light can be used for marking obstacles which pose a threat to aircraft, such as telecom towers, buildings, wind turbines, power transmission towers, airports and general aviation warning purposes. This light has two operations modes: flashing or steady burning. The operation modes arer adjustable by end user. On/Off is controlled by photocell automatically, and fault alarm outputting if any fails. It is ideal product for the users. Fields of applications: Airports Tall buildings / structures Chimneys Telecommunication towers Tower Cranes Transmission lines Radar Antenna Flag pole Wetra LIOL-B Low Intensity Single Light Datasheet

All in one type low-medium-high intensity light incorporates infrared that makes it completely night vision goggle compatible obstruction light. It is maintenance-free, complying ICAO and FAA international standarts. This light can be used for marking obstacles which pose a threat to aircraft, such as telecom towers, buildings, wind turbines, power transmission towers, airports and general aviation warning purposes. This light has two operations modes: flashing or steady burning. The operation modes arer adjustable by end user. On/Off is controlled by photocell automatically, and fault alarm outputting if any fails. It is ideal product for the users. Fields of applications: Airports Tall buildings / structures Chimneys Telecommunication towers Tower Cranes Transmission lines Radar Antenna Flag pole Wetra LIOL-B Low Intensity Single Light Datasheet

Medical gloves, medical masks, medical devices, medical shoe covers, medical gowns product, patient vital signs monitor, blood pressure device (sphygmomanometer), finger oximeter, laryngoscope, anaesthesia machine, aspirator, electrical intensive care bed, dc shock (defibrillator), microscope, autoclave, incubator, centrifuge, hemoglobinometer, ventilator, haematocrit centrifuge (pcv), spectro photo meter, waterbath, oxygen generator, mask, mask procedure face mask w/face shield, goggles, thermometer, body back, gloves, surgical gown, overshoe, covid 19 test kit, medical protection coverall, protective suits with pp+pe barrier, disposable medical coverall, non woven protective gown, medical protection coverall, protective suits with pp+pe, barrier, disposable medical coverall, disinfection wipes, disposable head covers, disposable bindings, sterilizer box.Exporter, shipping via ship, plane or trailer

100E Universal Silicone Sealant 100E is an one-component acetoxy cure silicone sealant for a range of general sealing and glazing applications. It provides a strong adhesion and suitable for use on common non-porous building materials. Stays permenantly elastic after curing. Remains flexible in low and high temperatures. Resistant to temperature exteremes. Resistance to aging, cracking and discoloring.

AKFIX 1044 is a very fast set, 2-component, 100% solid flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. This general purpose aromatic pure polyurea has been especially designed to protect and coat concrete, metal, wood, ceramic, geotextile surfaces. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. Its extremely fast gel time makes it suitable for applications down to -20 �°C without special conditioning of the component resins and isocyanates. It is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment. %100 solid, VOC free, no solvents No catalyst Fast reactivity and fast return to service time Seamless and joint-less coating Little or no odor Excellent thermal stability Water resistant Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc. Excellent flexibility Non sensitivity to temperature and humidity Excellent chemical resistance Excellent impact and abrasion resistance Anticorrosive Very good tensile and structural strength UV, chlorine and saltwater resistant High application thickness possible Variable application thickness possible Broad color spectrum

Why RYD-S? Because Renas RYD-S series liquid filling machines are; more hygienic, faster, more precise than primitive methods such as filling using barrels, kegs and taps; and it requires less workmenship. The fillings you perform are much more professional. What Are The Advantages? Some distinctive properties of Renas RYD-S series liquid filling machines which separates it from similar machines are as follows; Easy To Clean Flange Ferrule System; Thanks to the easy to clean flange ferrule system found on the connecting parts of RYD-S, the product contact surfaces can be demounted and cleaned within a few minutes without requiring and keys or technical equipment. Thanks to this, you never have any trouble with your production regarding hygiene. Anti Bacterial Joints And O-Rings; RYD-S is manufactured using anti bacterial silicone materials with parts such as all joints, o-rings, seals whether located on points which come into contact with the product or not, thanks to this feature, you can ensure maximum hygiene requirements and manufacture in accordance with the GMP conditions. Sensitive dosing Mechanism; Thanks to the sensitive dosing lever with a 0,5 mm pitch interval located on RYD-S, in enables you to work with minimum deviation in various filling intervals, using a single machine. As long as you do not change the dosing setting, it always works with the same measures. Emergency Button; Thanks to the emergency button located on RYD-S, notwithstanding whichever position the machine is in, it retracts the piston and makes it secure. RYD-S is in accordance with the occupational safety law no. 6331. Additional modifications are not required to ensure compliance with the law. Hose Suction System ; By connecting to the reservoir and to the tank drains with clamps, RYD-S can also perform suction from sources such as bins, buckets or jugs using the immersion method. It does not require you to bring the product to the opening of the machine. It also minimizes the time losses by performing the initial suction itself. Automatic and Manual Mode; RYD-S can operate in two different modes according to the speed and the form of your production. Thanks to the pedal switch which comes free with the machine, you can operate the machine in the manual or the automatic mode with time adjustment. Particularly with your serial productions, it automatically works without requiring you to press the pedal. Drip preventing Nozzle ; Thanks to the drip preventing nozzle system, RDY-S does not drip after the filling and the bottles you fill never gets dirty, no wastes occur due to dripping. Honed Product Suction Piston ; RYD-S reduces the loss of filling to a minimum by making very precise dosing even at high weights thanks to the honed product suction piston which is not featured in similar machines. Piston seals have a long service life thanks to their smooth piston surfaces. It does not damage the piston seals in a short time like similar machines... Internal Conditioner and Slide Valve; Thanks to the internal conditioner featured on RDY-S, the machine is protected against water and corrosion damages which may occur in the ventilation installation and which can harm the pneumatic system of the machine. Thanks to the slide valve located on the air opening of the machine, without requiring a separate valve, you can cut the air from the system when your work is done. Other Features Machine Chassis: The chassis or the machine and all metal surfaces are manufactured using SUS 304 Stainless steel. Tee, Clamp and Flange parts of the machine are manufactured using SUS 316 Stainless steel. Electrical System: The body of the machine is protected against all electrical threats thanks to the grounded chassis. Electro Pneumatic System: Thanks to its electro pneumatic system, RDY-S performs more precise dosings and reduces your loss of production to a minimum. Optional Properties 1) RDY-S surfaces which come into contact with the Product, can be manufactured using SUS 316 or different materials according to your needs. 2) RDY-S can be manufactured to enable filling products at high temperatures. 3) For products such as milk, ayran etc. which foam during fast fillings, to increase your production speed, an integrated nozzle which ascends and descends during filling can be added. 4) It can be manufactured as sensor triggered, if it is required on the Filling Line. 5) As per request, a counter showing the number of fillings made can be added. Products It Can Fill; For example: Fruit juice, water, turnip juice, shampoo at low viscosity, liquid soap, bleach, milk, all liquid oil and mineral oil types, medicine and syrups, thinner, liquid paints etc. all liquids with low viscosity, suitable for suction. We can perform trial fillings for your products expect colorant products or products which cause permanent damage. RYD- S2 Double Nozzle Filling Machine RYD - S2, in addition to all features on RYD - S series, enables you to perform fillings for two products at the same time. If you want, you may produce two different products in two different basis weights with a single machine. Despite having the features of two machines, it is cheaper compared to two separate machines. Production Information and Deadline Production Information: RYD - S is being manufactured on our factory located in Turkey. Our compant manufactures RYD - S series liquid filling machines with standart filling intervals mostly with stocks. You don't have to lose any time with waiting periods after making your decision. Special Productions: Aside from the standard filling intervals, RDY-S can be manufactured for different filling intervals required for your needs. For the non-standard production, the delivery deadline is between 5 to 20 days. The filling orifices located on the filling nozzles can be manufactured in different sizes according to your needs. In cases where you need to operate with 110V or different voltages, the machine can be manufactured according to your needs. Other Comments: Packaging: Our machine packaging is performed to enable delivery to long distance destinations. Transportation: We can deliver your product with our contracted courier company with very reasonable prices. If you wish, we can deliver it using your contracted warehouse or courier. Warranty: Our machine is warranted for a period of 1 year against manufacturing faults. GENERAL PROPERTIES Surfaces 304 Stainless Power Consumption 250 Watt Energy The Products Which The Machine Can Fill: Drinking Water, Fruit Juice, Lemonade, Sports Drinks,Energy Drinks, Pickle Juice, Turnip Juice, Milk, Ayran, Vinegar, Sunflower Seed Oil, Vegetable Oils, Shampoo, Hair Care Oil, Massage Oil.

Machining is a controlled production process used to create high-precision parts. In addition to precision machining that requires special production, our supplier is providing their services by combining traditional and modern technologies, both welded and weldless. They are able to respond many production needs, including heavy-duty custom-made machine parts, with the machinery accumulation and experience they have gained at the end of more than a long period of engineering experience. Do not hesitate to contact us for all your special needs that require machining, welded and non-welded manufacturing. General Usable Raw Materials: - Aluminium, Stainless Steels - Bronze, Brass, Copper, Titanium Alloys - Engineering Plastics - Steel Grades

New Generation Disinfectant Antibacterial, Antifungicide 100% Protection Multiway Clean is a water based, environmentally friendly disinfectant; which destroys the bacteria, fungicides and fungus in environments where it contacts. The Hypochlorous Acid; in other words the Active Chlorine, which is the environmentally suitable disinfectant that is compatible with the new production concept of our century is a biocide with a broad spectrum. It is strong, safe and non-toxic. It destroys almost all microorganisms such as bacteria, virus, fungus in seconds. The Hypochlorous Acid (HOCL) solution demonstrates its Disinfection Effect by disrupting the cell membrane structure of microorganisms, thanks to its high ORP ( Oxidation Reduction Potential) value. Due to this feature; the Hypochlorous Acid is a quite effective and broad spectrum disinfectant material. It performs an effective Disinfection and Sterilization process on microorganisms such as the Bacteria, Viruses and Fungus.

Available Valves : 1- Piston Valves 2- Globe Valves, 3- Bellow Seal Valves 4- Non-Rising Stem, Soft Seated Gate Valve 5- Knife Gate Valve, 6- Ball Valves 7- Stainless Steel Ball Valves, 8- Stainless Two Piece Ball Valve Flanged 9- Ball Valves with Mounting Pad 10- Wafer Type Butterfly Valves 11- Lug Type Butterfly Valves 12- Wafer Type Butterfly Valves for Natural Gas 13- Brass Valves for Water 14- Swing Type Check Valves 15- Solenoid Valves for General Usage 16- Earthquake Valves 17- Strainers 18- Safety Valves 19- Full Bore Ball Valve, 20- Monoblock Valves for Water, 21- Monoblock Valves for Liquids, 20- Monoblock Valves for Natural Gas, 21- Lift Type Check Valves, 22- Wafer Type Swing Check Valves, 23- Wafer Type Disco Check Valves, 24- Double Plate Check Valves, 25- Double Acting Pneumatic Actuator, 26- Electric Actuators, 27- Worm Gear, 28- Pneumatic Actuator Accessories, 29- Seperators, 30- Air Seperator, 31- Balance Container, 32- Air Tube, 33- Dismantling Joint, 34- Pilot Operated Pressure Reducer, 35- Pressure Reducing Valves, 36- Dynamic Balance Valves, 37- Threaded Static Balance Valves, 38- Flanged Static Balance Valves. Please send us an email together with your official "Letter of Interest" document by mentioning requested product details and quantity. Note: Pricing process may take 2 or 3 Work days to be finalized. Thank you in advance for your kind patience.