Aluminum composite panels.Aluminum composite panels
DECOPANEL decorative insulation panels : is a new type of product for interior and exterior decoration, beyond it is appearance it solves problems about insulations : heat, fire and sound. This new sandwich panel has three layers ; coated aluminium or steel alloy sheet layer with nano protective layer outside, PU polyurethane foaming middle layer and aluminium foil layer. The production can be made in a large variety of surface textures even with wooden, marble, wallpaper appearance. Can be produced in requested lengths up to 6 meters. Panels with 10 mm thickness can be used for internal or external, 30 mm thickness can be used for external applications. Our production line has 4 different section types of panel s. It has so many advantages when compared to traditional wall covering materials. 1. THERMAL INSULATION â?¢ When applied at wall&ceilings it provides a temperature difference of 7 degrees. It prevents the increase of indoor temperature at hot seasons, likewise it prevents the heat loss in cold seasons. Therefore decopanel provides a comfortable living area in all cond 2. SOUND INSULATION It provides 29 DB de So it should be applied in places where soun itions. crease in nc d insulation ise when applied to walls. s crucial like hospitals, hotels, labaratories,schools, assembly rooms, office buildings. 3. EIREPREVENTIONâ?¢ This product has passed the fireproof grade B1, so basically meets the engineering requirements of fire. 4 HARDNESS.L The production combines the aluminium or galvanized steel alloy plate and polyurethane which makes a substantial increase in strength and hardness. So can be applied to all kinds of wall and ceilings. 5. MOISTURE PROOF â?¢ It prevents the temperature differences at walls&ceilings so wetness and moisture does not occurs. 6. GREEN ENVIRONMENTALPR_OTECTION â?¢ All raw materials adopted by the product is environmental protection material, zero emission, zeroformaldehyde, zero toxic gas oscillation. 7. INSTALLATION CONVENIENCF ft I IGHTNESS_â?¢ It can be applied on existing wall&ceiling but also it can be used in partition wall and suspended ceiling applications. So it is much more labor-saving and time-saving product from traditional old wall&ceiling covering materials. 8. LIGHTNESS.: It is a light material so when used to produce partition walls and suspended ceilings. It does not increase the total weight of the building also does not increase earthquake load. 9. SURFACE_DURABILITY â?¢ The surface of product can not be deformed, damaged and can be cleaned easily. 10. SAVE SPACE : It does not installed by any chassis, it can be directly mounted on the wall using screws or punches. This provides 5-10 cm saving of wall space. THICKHNES: 1 mm WIDTH: 4 mm We can be produced in any length up to 6 meters
DECOPANEL decorative insulation panels : is a new type of product for interior and exterior decoration, beyond it is appearance it solves problems about insulations : heat, fire and sound. This new sandwich panel has three layers ; coated aluminium or steel alloy sheet layer with nano protective layer outside, PU polyurethane foaming middle layer and aluminium foil layer. The production can be made in a large variety of surface textures even with wooden, marble, wallpaper appearance. Can be produced in requested lengths up to 6 meters. Panels with 10 mm thickness can be used for internal or external, 30 mm thickness can be used for external applications. Our production line has 4 different section types of panel s. It has so many advantages when compared to traditional wall covering materials. 1. THERMAL INSULATION When applied at wall&ceilings it provides a temperature difference of 7 degrees. It prevents the increase of indoor temperature at hot seasons, likewise it prevents the heat loss in cold seasons. Therefore decopanel provides a comfortable living area in all cond 2. SOUND INSULATION It provides 29 DB de So it should be applied in places where soun itions. crease in nc d insulation ise when applied to walls. s crucial like hospitals, hotels, labaratories,schools, assembly rooms, office buildings. 3. EIREPREVENTION This product has passed the fireproof grade B1, so basically meets the engineering requirements of fire. 4 HARDNESS.L The production combines the aluminium or galvanized steel alloy plate and polyurethane which makes a substantial increase in strength and hardness. So can be applied to all kinds of wall and ceilings. 5. MOISTURE PROOF â?¢ It prevents the temperature differences at walls&ceilings so wetness and moisture does not occurs. 6. GREEN ENVIRONMENTALPR_OTECTION â?¢ All raw materials adopted by the product is environmental protection material, zero emission, zeroformaldehyde, zero toxic gas oscillation. 7. INSTALLATION CONVENIENCF ft I IGHTNESS_â?¢ It can be applied on existing wall&ceiling but also it can be used in partition wall and suspended ceiling applications. So it is much more labor-saving and time-saving product from traditional old wall&ceiling covering materials. 8. LIGHTNESS.: It is a light material so when used to produce partition walls and suspended ceilings. It does not increase the total weight of the building also does not increase earthquake load. 9. SURFACE_DURABILITY â?¢ The surface of product can not be deformed, damaged and can be cleaned easily. 10. SAVE SPACE : It does not installed by any chassis, it can be directly mounted on the wall using screws or punches. This provides 5-10 cm saving of wall space. SIZES: THICKNESS : 3 mm WIDTH : 40 mm We can be produced in any length up to 6 meters
Profiles... Plastic profiles.
Aluminium Composite Panels, we have B1, B2 and A2 classes of production and have also been certified by SGS. Also our ACP coatings are under guarantee of HYDO as we use Hyro coated Aluminium Sheets on our products.
Aluminium Composite Panels, we have B1, B2 and A2 classes of production and have also been certified by SGS. Also our ACP coatings are under guarantee of HYDO as we use Hyro coated Aluminium Sheets on our products.
Aluteks based in Istanbul/ Turkey and is specialised in Aluminium Profiles (Anodized- Powdercoated) and their accesories (components). We are able to produce customer oriented products with our own mould production for extrusion and PVC & Alu injection there fore we have a wide range of product scale. We are serving our products for espeaciall for the following industries Insect screens, Windows & Doors , Roller Blinds and Roller Shutters, Solar (Photovoltaic), Trim and tile Profiles from Aluminium All and more of the above mentioned products are producing by us and in addition we are doing custommade or standart accesories from pvc and alu injection and EPDM gaskets for the Window industry. Everything about Alumium Systems you can find is under one roof in Aluteks. Aluteks is exporting their products in to 18 Countries and is expanding every year its business with competitive prices. We will apprecitae if you could give us the oppurtunity to offer you our best prices. I am looking very forward to hear from you
Panel Radiators for Central Heating Steel or Aluminium Radiators Various Brands, Models, Sizes from Stock for Export As a very strong stockist in Turkey, our company offers (steel and aluminium) panel radiators with wide range of brands, models, types, and sizes to our domestic and worldwide customers, at very competitive prices and with fast delivery options directly from our large stock for export. Your very small orders are also welcome. Please contact us now to get fast reply. We offer a complete package, wide range of HVAC products directly from our huge stock in Turkey for export: Boilers (wall-hung domestic type boilers / industrial type gas boilers), panel radiators, towel warmers, electrical/gas water heaters (instantaneous water heaters, storage tank water heaters), air-conditioners, natural gas space heaters, gas heater fans, spare parts of boilers, plumbing equipment, plastic materials (plastic pipes and fittings), industrial boilers, expansion tanks, valve groups, heat exchangers, pump groups (circulation pumps, centrifuge pumps, dreinage pumps...), heat pumps...
Aluminum.
Aluminum profiles.
Aluminum extrusion profiles (economic & high quality policy) mill finished electrostatic powder painting anodized coating.
Aluminium.
Aluminium composite panel.
Aluminum profiles .
Aluminum profiles , accessories, glass balcony systems, terrace systems, pergola systems, aluminum terrace systems.
Quality: Aluminum a7 ingots STOCK 50.000mt 12 months contract is made Monthly Supply: 1000-50.000 thousand tons Origin: Russia Payment:LC-DLC Price: 1900$ Annex: Analysis report, LOI-POF
Thickness : 0,10mm - 3mm Width : 12,5mm - 2200mm Alloy : 1xxx, 3xxx, 5xxx, 8xxx Temper : H0, H00, H1x, H2x, H3x .
Quality: 6061 and 6063.
Soft and hard aluminum scrap Container basis
.HEM beams have a wide flange, HEM beams are commonly used in structural applications that require high strength and stability HEB beams have a wider flange, HEB beams are widely used in construction, especially for columns, beams, and heavy structural elements. and HEA beams have a narrower flange. They are used for structural support in various construction applications. often lighter in weight Sizes: from 100mm to 1000mm
