Specific to the automatic models with precise flow adjustment and specially designed spray-bar, perfect spreading can be made.
The system works by reading the data such as vehicle speed and spread width by providing instantaneous pump flow for the desired amount of spreading.
Spreading width can be increased or decreased during operation, the operator can accelerate or slow down according to the condition of the road, while the operator is focused on the driving system can start, maintain, and finish spreading.
- COMPLETE CONTROL FROM CABIN
Thanks to the specially designed control panel located in the operator's cab, the operator can get all functions such as circulation, automatic/manual spreading, intermediate pump feature, system cleaning, as well as controls such as pneumatic spray-bar locks, positions, paving width and spray bar movement of the spray bars.
- ASPHALT PUMP
The body of the asphalt pump is designed to remain in the tank so that freezing in the pump is prevented.
Thanks to the internal valves on the pump, the system performs all functions without the need for a complicated piping system.
Maintenance and cleaning are provided much more quickly and easily.
- PUMP FUNCTION
With a dedicated Asphalt Distributor Pump, critical functions can be performed with valves that are located both inside the pump and at the piping.
Pneumatic actuators can be controlled directly from the cabin.
Re-Suction
TankFilling
Tank Circulation
Automatic / Manual Spraying
Tank Discharge
Intermediate pump (allows the transfer of the material from one source to another without mixing with the material in the tank using the Distributor)
â?¢ System Cleaning
- SAFE & FAST HEATING
8 diameter 2 flame tubes are placed along with the tank in U format.
With 2 units of the electric burner, the material is heated quickly and efficiently.
- SOLID MECHANICAL JOINTS
The mechanical joints are important for the sealing and long-life use of the spray bar. Connectors used in the VAD Series asphalt Distributor allow the entire spray bar to be raised, lowered, or moved sideways.
- OPTIONAL THERMAL OIL SPRAY-BAR HEATING SYSTEM
The oil is heated by using the burners in the bitumen tank and transmitted to the spray bar.
This eliminates the risk of material cooling during and after the spreading.
- WORLDWIDE DELIVERY AND ONSITE INSTALLATION
VAD Series Asphalt Distributors are designed according to the request of our customers to be suitable for their own countriesâ?? new or second-hand trucks.
So, the high truck import expenses will be reduced.
VAD Series can be put pre-montaged into a 40ft container thanks to this design transportation costs are reduced significantly and it took only 5-7 days for the installation and training.
Tertiary impact crushers are high-speed machines that are used to obtain sand.
The material entered into the machine exits the machine after that it is hit against the walls and crushed by a high-speed (800 r / min) rotor. The material generally left over the screen is broken in these crushers, which usually are used to obtain 0-5 mm sand.
VSI crushers are the tertiary type of crushers used to crash the hard and abrasive materials between 0-45 mm, bring them into cubic shape and obtain sand. VSI crushers are produced in two types as closed rotor and open rotor. The vertical shaft types of crushers with closed rotor are fed with stones maximum size of 0-45 mm. because some large material in return of the crashed material can leave on the screen; these types of crushers are not suitable for crashing the returned material.
VSI crushers shoot and crush the material, which entered into the rotor, by throwing them to the lining of stones "stone box" which formed in the stator naturally and to the materials which entered in the system from the outside of the rotor with a speed of 67 - 80 m / s approximately (crushing stones by hitting stones). VSI crushers are used to crush the materials having hardness lower than the grade 9 with a moisture content of less than 9%. Non-flammable and non-explosive mining materials have to be used.
Vibrating feeders are with each other synchronized two pieces of feeders which built solidly, supported with heavy duty suspension springs, driven/actuated by vibromotor, these feeders enable the transmission of the tuvenane materials, brought from the quarry, into the primer crushers in an orderly manner. They throw the mixed soil part of the tuvenian material outside of the system through the intermediate size adjustable grids on the front part of the feeders which coated with mangan. By demand, the loss of materials can be included in the system again after screening them with a suitable screen it is possible. The feeding capacity adjustment of vibromotor vibrating feeders, produced by us, can be made. Thus, the primary machine is fed regularly, and again there is no need to stop and run the machine continuously.
Ideal solution for strip cutting from tubular fabric.
Standart triple strip cut. (optionally increasable)
Cutting different sizes at the same time with adjustable knives.
Adjustable diameter of strip rolls.
Automatically stop after reaching the required diameter.
Save space with 1m2 working area.
Easy movement with directional wheels
Speed control
Low power consumption.
Easy maintenance.
External Fixation Systems consist of various components used to build constructs to treat the indications listed below. External Fixation Systems are modular, therefore, different frame configurations are possible. An individualized configuration should be designed for each case to suit the specific application. All External Fixation System components are for single use only. Each External Fixation System is designed as a system and does not allow the substitution of components from other systems.External Fixation Systems are made from aluminium and stainless steel. It utilizes circular frame and half-pin fixation techniques and procedures for placement of the device. The device is intended to be centered on the axis of rotation. The device allows some adjustability to permit adjustment on the axis.
Chocolate Coating Machine
QUALTY : All parts of the machine are produced from 304 qualty stainless steel materials
SYSTEM : The drum system. Push-up roller mixer. Speed control.Control panel. Chocolate thinning fan. Wire tape up to 40 cm
POWER : Wire tape 0,75 kW mixer 1,1 kW output transfer drum 0,75 kW
DIMENSION : Width 99 cm - Height 108 cm - Length 120 cm
WEIGHT : 270 kg
CAPACITY : 100 kg
CVS Fuel Protection Systems is produced for prevent fuel theft
100% protection
Commercial vehicles mainly working with diesel and gasoline (truck, bus, minibus,midibus, Construction Machinery, generator, motorcycle, Yacht, Boat, etc.) products and systems that prevent diesel theft from vehicle groups.
It is possible to make stick sugar from granulated sugar by using the machine which is produced by the best-quality materials. It is easy-to-use and produced basing on the standards like cleaning and maintenance. Product statement and capacity information can be acquired by commanding the PLC system. Gold Paketleme Makina GIda San. ve DIS Tic A . is producing the GST-100 Stick Sugar Packaging Machine over 10 years of experience. The paper which was produced with poly-ethylen method, comes printed from the press with the width of 200 mm and weight of 50+15 gr and 70+15 gr, is attached to the machines bobbin attaching section. The paper on the bobbin is transferred to the 4-Blade section in a controlled way by the help of pulleys. In the blade section, the paper with the 40mm width is divided into 5 equal pieces, then transferred to the collar and pillow section. In this section, papers pass on the channels on pillow and wrap around the pipes which the crystal sugar is transferred.
The sides of these wrapped paper, are sealed vertically(rigidly) from the back section in the form of A+A, by means of the resistances inside the vertical jaw(rigid claw). After the sealing process, made by the help of vertical jaw, the granulated suga
which is on the top side of the machines sugar tank, is transferred into the sealed paper, which can take 1-10 grams, by the help of piston mechanism. The bottom claw group is cutting the length of the packs equally by sealing bottom and top side of the stick packs according to the photocell point on the paper.
The stick sugars which were packed and cut, are transferred on the output conveyor for packing. Also, it is possible to make production different than the standard stick sugar pack dimensions. The amount of sugar, to be produced according to the consumer needs, is entered on screen and this provides the machine to stop automatically when the production finishes. The PLC control system is used in this machine. The operating speed of the system can be easily controlled according to the production capacity.
Because Renas RYD-S series liquid filling machines are; more hygienic, faster, more precise than primitive methods such as filling using barrels, kegs and taps; and it requires less workmenship. The fillings you perform are much more professional.
What Are The Advantages?
Some distinctive properties of Renas RYD-S series liquid filling machines which separates it from similar machines are as follows;
Easy To Clean Flange Ferrule System;
Thanks to the easy to clean flange ferrule system found on the connecting parts of RYD-S, the product contact surfaces can be demounted and cleaned within a few minutes without requiring and keys or technical equipment. Thanks to this, you never have any trouble with your production regarding hygiene.
Anti Bacterial Joints And O-Rings;
RYD-S is manufactured using anti bacterial silicone materials with parts such as all joints, o-rings, seals whether located on points which come into contact with the product or not, thanks to this feature, you can ensure maximum hygiene requirements and manufacture in accordance with the GMP conditions.
Sensitive dosing Mechanism;
Thanks to the sensitive dosing lever with a 0,5 mm pitch interval located on RYD-S, in enables you to work with minimum deviation in various filling intervals, using a single machine. As long as you do not change the dosing setting, it always works with the same measures.
Emergency Button;
Thanks to the emergency button located on RYD-S, notwithstanding whichever position the machine is in, it retracts the piston and makes it secure. RYD-S is in accordance with the occupational safety law no. 6331. Additional modifications are not required to ensure compliance with the law.
Hose Suction System ;
By connecting to the reservoir and to the tank drains with clamps, RYD-S can also perform suction from sources such as bins, buckets or jugs using the immersion method. It does not require you to bring the product to the opening of the machine. It also minimizes the time losses by performing the initial suction itself.
Automatic and Manual Mode;
RYD-S can operate in two different modes according to the speed and the form of your production. Thanks to the pedal switch which comes free with the machine, you can operate the machine in the manual or the automatic mode with time adjustment. Particularly with your serial productions, it automatically works without requiring you to press the pedal.
Drip preventing Nozzle ;
Thanks to the drip preventing nozzle system, RDY-S does not drip after the filling and the bottles you fill never gets dirty, no wastes occur due to dripping.
Honed Product Suction Piston ;
RYD-S reduces the loss of filling to a minimum by making very precise dosing even at high weights thanks to the honed product suction piston which is not featured in similar machines. Piston seals have a long service life thanks to their smooth piston surfaces. It does not damage the piston seals in a short time like similar machines...
Internal Conditioner and Slide Valve;
Thanks to the internal conditioner featured on RDY-S, the machine is protected against water and corrosion damages which may occur in the ventilation installation and which can harm the pneumatic system of the machine. Thanks to the slide valve located on the air opening of the machine, without requiring a separate valve, you can cut the air from the system when your work is done.
Other Features
Machine Chassis:
The chassis or the machine and all metal surfaces are manufactured using SUS 304 Stainless steel. Tee, Clamp and Flange parts of the machine are manufactured using SUS 316 Stainless steel.
Electrical System:
The body of the machine is protected against all electrical threats thanks to the grounded chassis.
Electro Pneumatic System:
Thanks to its electro pneumatic system, RDY-S performs more precise dosings and reduces your loss of production to a minimum.
Optional Properties
1) RDY-S surfaces which come into contact with the Product, can be manufactured using SUS 316 or different materials according to your needs.
2) RDY-S can be manufactured to enable filling products at high temperatures.
3) For products such as milk, ayran etc. which foam during fast fillings, to increase your production speed, an integrated nozzle which ascends and descends during filling can be added.
4) It can be manufactured as sensor triggered, if it is required on the Filling Line.
5) As per request, a counter showing the number of fillings made can be added.
Products It Can Fill;
For example: Fruit juice, water, turnip juice, shampoo at low viscosity, liquid soap, bleach, milk, all liquid oil and mineral oil types, medicine and syrups, thinner, liquid paints etc. all liquids with low viscosity, suitable for suction. We can perform trial fillings for your products expect colorant products or products which cause permanent damage.
RYD- S2 Double Nozzle Filling Machine
RYD - S2, in addition to all features on RYD - S series, enables you to perform fillings for two products at the same time. If you want, you may produce two different products in two different basis weights with a single machine. Despite having the features of two machines, it is cheaper compared to two separate machines.
Production Information and Deadline
Production Information: RYD - S is being manufactured on our factory located in Turkey. Our compant manufactures RYD - S series liquid filling machines with standart filling intervals mostly with stocks. You don't have to lose any time with waiting periods after making your decision.
Special Productions:
Aside from the standard filling intervals, RDY-S can be manufactured for different filling intervals required for your needs. For the non-standard production, the delivery deadline is between 5 to 20 days. The filling orifices located on the filling nozzles can be manufactured in different sizes according to your needs. In cases where you need to operate with 110V or different voltages, the machine can be manufactured according to your needs.
Other Comments:
Packaging: Our machine packaging is performed to enable delivery to long distance destinations.
Transportation: We can deliver your product with our contracted courier company with very reasonable prices. If you wish, we can deliver it using your contracted warehouse or courier.
Warranty: Our machine is warranted for a period of 1 year against manufacturing faults.
GENERAL PROPERTIES
Surfaces 304 Stainless
Power Consumption 250 Watt Energy
The Products Which The Machine Can Fill:
Drinking Water, Fruit Juice, Lemonade, Sports Drinks,Energy Drinks, Pickle Juice, Turnip Juice, Milk, Ayran, Vinegar, Sunflower Seed Oil, Vegetable Oils, Shampoo, Hair Care Oil, Massage Oil.
Technical characteristics
* works with pneumatic system.
* primes the product from its’ 80 lt. Stainless steel hopper above.
* interchangeable nozzle with a code of vns03 for the products with particles inside up to 30 mm diameter like jam, american salad etc.
* there is a heigth adjustable platform on the filler to place the packages during the filling process.
* the machine is exproof system.
* the seals are manufactured from teflon , viton or polyethylene according to the product to be filled.
* the parts on the machine are connected by tri –clamps.
*the nozzle, main valve and the filling piston are designed for an easy-cleaning .They can be dismantled easily without using any tool.
* high surface smoothness and argon arc welding technology prevents bacteria growth.
*the machine stands on a stainless steel frame which is supprted by 4 castors, it can be easily move to anywhere.
* easy to adjust and record the filling range by the numerator and the hand wheels.
* a detailed instruction manual for each model is available.
Number of cylinders: 1
Filling range: min:50 ml - max:500 ml
Capacity : 1000 packages/hour
Materials used on the filler
* the parts that contact with the product are 316 l stainless steel. The other parts are aluminium and 304 l stainless steel.
Technical specifications
* works with pneumatic system.
* primes the product from its’ 80 lt. Stainless steel hopper above.
* interchangeable nozzle with a code of vns03 for the products with particles inside up to 30 mm diameter like jam, american salad etc.
* there is a heigth adjustable platform on the filler to place the packages during the filling process.
* the machine is exproof system.
* the seals are manufactured from teflon , viton or polyethylene according to the product to be filled.
* the parts on the machine are connected by tri –clamps.
*the nozzle, main valve and the filling piston are designed for an easy-cleaning .They can be dismantled easily without using any tool.
* high surface smoothness and argon arc welding technology prevents bacteria growth.
*the machine stands on a stainless steel frame which is supprted by 4 castors, it can be easily move to anywhere.
* easy to adjust and record the filling range by the numerator and the hand wheels.
* a detailed instruction manual for each model is available.
Number of cylinders: 1
Filling range: min:50 ml - max:500 ml
Capacity : 1000 packages/hour
Materials used on the filler
* the parts that contact with the product are 316 l stainless steel. The other parts are aluminium and 304 l stainless steel.
PROFESSIONAL LINE SMG 3000 D
Colour Blue
Detergent Tank Capacity 1,5 liters
Detergent Level Alarm Visual and Acoustic
Detergent Injection 3-7-10 cc / minute
Hot Water Injection --
Steam Pressure 6,5 bar
Voltage 230 V / 50 Hz
Total Power 10 Amp
Boiler Power 2200 W
Vacuum Motor Power (3 Levels) 1000 W
Boiler Material AISI 304 Stainless Steel
Boiler Volume (Liter) 2,6
Tank Capacity (Liter) 2,2
Dirt Tank Capacity (Liter) 1,8
Steam Production Continuous
Boiler Steam Heat 161oC
Water Level Alarm Visual and Acoustic
Handgrip Voltage 9 V
Heating Time 5 minutes
Steam Pressure Regulation 3 Levels
Dimensions 530 x 400 x 400 mm
Net Weight 14,5 Kg
Certificates CE, GS-Nemko,IPX4, HACCP
Cable Lenght 7 m.
MOQ 4 units on 100x120 pallet. Box dimensions 62x47x68 H cm.
The paper cup machine which the GOLD PAKETLEME MAKINA® produced with high-technology, turns the single side or double side (optionally) lamination paper into paper cup.
The density of the lamination paper is 170-350 gr/m² ±18 gr/m² and convenient for both single and double side production. It produces paper cup with maximum error rate of % 0.5. The Production of paper cup changes according to the paper quality and the producing capacity is 80-90 pcs. / minute.
