Ball mills are preferred when a product of less than 150 microns is desired.
According to the factory capacity and the projects of our customers, together with our technical team, we calculate the required mill size together and put into operation the grinding division.
Panel fences and grass wire fences heights are 100cm
120/150/200 cm
Panels length is 2,5 meter , it is fully galvanized .
Mesh size is 50 x 150 and wire thickness is 4 diameter mm . it has been
manufacturing from hot dip galvanized.
if you want a colour . It
has per elektrostatik covering like
green colour
It is made of PVC. Since it is manufactured as
UV Beam Resistant, it is called â??Pond Typeâ??
Geomembrane. Because of UV additive,
it is direct sun beam resistant for ages.
That kind of Geoser PVC Geomembrane
is comfortabely used without coating the
surface of it. It is manufactured in gray,
blue, yellow colours.
Geoser PVC GEOMEMBRANES are
manufactured in a width of 2,10m; standard
lengths of 20m&25m; with thicknesses of
1,00mm & 1,20mm & 1,50mm & 2,00mm &
2,50mm & 3,00mm. When it is demanded,
they are manufactured in optional lengths.
Polyethylene(PE) takes the name of ethylene which is in the form of monomer. With several
methods of polymerization, Ethylene becomes Polyethylene. Geoser HDPE Geomembrane is
a geosynthetic liner which is formed as a result of extrusion of high density polyethylene and
shaped homogenously by calender system. It can be used in all projects where impermeability
is required.
Plastomeric waterproofing cover with APP (Atactic polypropylene) spunbond polyester felt carrier on both sides polyethylene coated
Usage areas
Water and steam insulation of wet spaces. Terrace and sloping roofs. Pressurized groundwater problems. Retaining wall and basement walls. Rain gutters, balconies, flowerpots, concrete canal interiors and garden terraces, water tanks, ponds, sewage treatment plants, parking, hidden creek insulations
Advantages
It has high flexibility. It is based on building movements and expansion differences. Dilatation, chimney bottom, parapet return details such as easily applied. The building lasts its lifetime.
It can be applied on different types of floors. It provides waterproofing regardless of the technical characteristics of the floor and receives only mechanical support from the underlying carrier. The amount of void in the concrete, cracks on the surface, dusting rate do not affect the waterproofing properties. It has high tensile-breaking strength thanks to polyester felt as carrier. It is based on building movements, subsequent cracks, and the amount of expansion of different materials in filters and parapets. No additional material is required for dilatations. The amount of use can be clearly determined before application. It is not affected by differences in outdoor weather conditions and chemical additives inside. Technical specifications are standard.
Storage and Protection
Rolls should be stored and transported vertically. It should not be exposed to ultraviolet rays and sudden changes in temperature. After application, no drilling and cutting operations should be performed. The terraces to be visited should be protected with floor covering.
Method of Application
With torch flame 10 cm at the joints, 15 cm at the roll ends. It is applied in full, dotted or free form as a share of one thousandth.
Polyethylene(PE) takes the name of ethylene which is in the form of monomer. With several
methods of polymerization, Ethylene becomes Polyethylene. Ahed HDPE Geomembrane is a
geosynthetic liner which is formed as a result of extrusion of high density polyethylene and
shaped homogenously by calender system. It can be used in all projects where impermeability
is required.
Types:
HDPE Flat Geomembranes
HDPE one-side textured geomembranes
HDPE two-side textured geomembranes
LDPE geomembranes
LLDPE geomembranes
VLDPE geomembranes
HDPE T-Grip geomembranes
HDPE Discrete T-Grip geomembranes
HDPE one-side geotextile laminated geomembrane
Use Locations:
Landfills
Waste water repository and treatment
Drainage pits for collecting leakage of gold
and other mines
Oil tanks and oil fields
Sedimentation ponds
Fertilizer pits
Building foundations, if needed
Irrigation ponds
Tunnels
Irrigation canals
Bioenergy generation plants
Product Featurus
High resistance to chemicals
UV resistant
Less friction rate because of the textured layer
Highly resistant to organic and inorganic solvents
Profoundly resistant to the fractures
Resistant against natural conditions
Resistant to punctures and cracks
Low permeability
Higher tensile strenght
Ahed PVC Geomembranes are geosynthetic liners manufactured from PVC resin and other
synthetic raw materials and used in waterproofing applications. Ahed PVC geomembranes
have different types for different applications such as for pools, tunnels, irrigation channels,
pipes, building foundations, terraces and water reservoirs.
Use Locations
Building Foundations
Dams, transmission tunnels
Roofs and terraces
Carparks
Waste water treatments
Pools
Pond for agricultural irrigation purposes
Potable water reservoirs
Underpasses
Highway, railway tunnels
Subway stations and tunnels
Irrigation canals
Product Features:
Resistant to plant roots. Can be recycled. Resistant to temperatures between -40C and +70C.
Joints are welded with welding robots which can do double inlet welding. Resistant to aging and
corrusion. Enclosed class E� in combustion, no flame occurs. Long life span. High resistance
to mechanic shocks. High performance in tensile strenght, elongation and elasticity. Keeps high
eleasticity in cold weather conditions, never cracks. Can be manufactured as lamination with
geotextile fabric; UV beam resistant, signal layered (OPTIONAL). Since it is loose laid, it is affected at
the minimum degree as a result of movement in construction. Different colour and dimension options.
UV RESISTANT PVC GEOMEMBRAN:
It is made of PVC. Since it is manufactured
as UV Beam Resistant, it is called Pond
Type� Geomembrane. Because of UV
additive, it is direct sun beam resistant for
ages. That kind of AHED PVC Geomembrane
is comfortabely used without coating the
surface of it. It is manufactured in gray,
blue, yellow colours.
AHED PVC GEOMEMBRANES are
manufactured in a width of 2,10m; standard
lengths of 20m&25m; with thicknesses of
1,00mm & 1,20mm & 1,50mm & 2,00mm &
2,50mm & 3,00mm. When it is demanded,
they are manufactured in optional lengths.