Pur 450 Pu Waterproofing Membrane
One part, easy to apply, specially formulated polyurethane based, elastic, crack bridging membrane. It cures to form a highly elastic, seamless, waterproof coating with excellent crack bridging properties. Its performance is maintained even at low temperatures.
Excellent Adhesion
Easy application
May be applied interior and exterior areas
Crack Bridging
Highly elastic
Economical in use
Silk/matt appearance
Root penetration resistant
Aqua Zero Hybrid Waterproofing Membrane
Aquazero; is a premium, liquid and cold applied, one-component silane modified polymer (SMP) based polymer, elastic, waterproofing membrane, free of bitumen, solvent and isocyanates. After fully cured, it forms waterproof, UV resistant surface which also repairs the cracks up to 5mm.
Applicable also on damp surfaces.
Good resistance to UV, water and moisture.
Self-leveling.
Paintable.
Applicable by brush, roller or a spatula.
Provides water vapor permeability, allowing the surface to breathe.
Environmental friendly Free of bitumen, isocyanates and solvent
PENGUEN Serial Waterproofing Membranes are plastomeric type that are the ideal preference for mild climate zones. In producing of this membranes, APP (Atactic Polypropylene) with thermoplastic resin is used in order to enhance the bitumen. Fibreglass tissue and non-woven polyester mat is used as a carrier in order to reinforce to membrane.
Application Area
Bituminous membranes can be applied in all areas where water can affect the structure such as walls which have contact with ground, foundations and layers with the ground.
They can also be used in external walls which is below of the water level , balconies, terraces, bathrooms and toilets.
Additionally they can be used in the structures for water reservoirs, artificial ponds or resting walls. It provides, in many ways a better economical and aesthetic solution.
Cold Bending -5 °C Temperature Resistance (Minimum) 110 °C Breaking Point (Fraass) -15°C
Features
POLYETHYLENE FILM
APP ADDED MODIFIED BITUMEN
GLASS TULLE AND POLYESTER FELT CARRIER
APP ADDED MODIFIED BITUMEN
POLYETHYLENE FILM
It keeps its good adherence even after application and it is definite solution for all waterproofing problems especially in the basement applications. It can be applied all different surfaces like wood, cement and metals.
It has shows enhanced elasticity against transversal and longitudinal structural movement. It also stands against building movements and structural expansion differences.
Our membranes neither dissolve or discharge in warm weather conditions. They do not crack in the cold weather conditions and can be easily used with the help of blow torch. It is easily applied with cutting special cutters according to necessary sizes.
The Penguen Series are suitable for using in dilatation, concrete structures, parapet turns and chimneys. They are as durable as the life of the building given that they are applied correctly.
PENGUEN Serial Waterproofing Membranes are plastomeric type that are the ideal preference for mild climate zones. In producing of this membranes, APP (Atactic Polypropylene) with thermoplastic resin is used in order to enhance the bitumen. Fibreglass tissue and non-woven polyester mat is used as a carrier in order to reinforce to membrane.
Application Area
Bituminous membranes can be applied in all areas where water can affect the structure such as walls which have contact with ground, foundations and layers with the ground.
They can also be used in external walls which is below of the water level , balconies, terraces, bathrooms and toilets.
Additionally they can be used in the structures for water reservoirs, artificial ponds or resting walls. It provides, in many ways a better economical and aesthetic solution.
Cold Bending -5 °C Temperature Resistance (Minimum) 110 °C Breaking Point (Fraass) -15°C
Features
POLYETHYLENE FILM
APP ADDED MODIFIED BITUMEN
GLASS TULLE AND POLYESTER FELT CARRIER
APP ADDED MODIFIED BITUMEN
POLYETHYLENE FILM
It keeps its good adherence even after application and it is definite solution for all waterproofing problems especially in the basement applications. It can be applied all different surfaces like wood, cement and metals.
It has shows enhanced elasticity against transversal and longitudinal structural movement. It also stands against building movements and structural expansion differences.
Our membranes neither dissolve or discharge in warm weather conditions. They do not crack in the cold weather conditions and can be easily used with the help of blow torch. It is easily applied with cutting special cutters according to necessary sizes.
The Penguen Series are suitable for using in dilatation, concrete structures, parapet turns and chimneys. They are as durable as the life of the building given that they are applied correctly.
It is made of PVC. Since it is manufactured as
UV Beam Resistant, it is called â??Pond Typeâ??
Geomembrane. Because of UV additive,
it is direct sun beam resistant for ages.
That kind of Geoser PVC Geomembrane
is comfortabely used without coating the
surface of it. It is manufactured in gray,
blue, yellow colours.
Geoser PVC GEOMEMBRANES are
manufactured in a width of 2,10m; standard
lengths of 20m&25m; with thicknesses of
1,00mm & 1,20mm & 1,50mm & 2,00mm &
2,50mm & 3,00mm. When it is demanded,
they are manufactured in optional lengths.
Polyethylene(PE) takes the name of ethylene which is in the form of monomer. With several
methods of polymerization, Ethylene becomes Polyethylene. Geoser HDPE Geomembrane is
a geosynthetic liner which is formed as a result of extrusion of high density polyethylene and
shaped homogenously by calender system. It can be used in all projects where impermeability
is required.
Plastomeric waterproofing cover with APP (Atactic polypropylene) spunbond polyester felt carrier on both sides polyethylene coated
Usage areas
Water and steam insulation of wet spaces. Terrace and sloping roofs. Pressurized groundwater problems. Retaining wall and basement walls. Rain gutters, balconies, flowerpots, concrete canal interiors and garden terraces, water tanks, ponds, sewage treatment plants, parking, hidden creek insulations
Advantages
It has high flexibility. It is based on building movements and expansion differences. Dilatation, chimney bottom, parapet return details such as easily applied. The building lasts its lifetime.
It can be applied on different types of floors. It provides waterproofing regardless of the technical characteristics of the floor and receives only mechanical support from the underlying carrier. The amount of void in the concrete, cracks on the surface, dusting rate do not affect the waterproofing properties. It has high tensile-breaking strength thanks to polyester felt as carrier. It is based on building movements, subsequent cracks, and the amount of expansion of different materials in filters and parapets. No additional material is required for dilatations. The amount of use can be clearly determined before application. It is not affected by differences in outdoor weather conditions and chemical additives inside. Technical specifications are standard.
Storage and Protection
Rolls should be stored and transported vertically. It should not be exposed to ultraviolet rays and sudden changes in temperature. After application, no drilling and cutting operations should be performed. The terraces to be visited should be protected with floor covering.
Method of Application
With torch flame 10 cm at the joints, 15 cm at the roll ends. It is applied in full, dotted or free form as a share of one thousandth.
Polyethylene(PE) takes the name of ethylene which is in the form of monomer. With several
methods of polymerization, Ethylene becomes Polyethylene. Ahed HDPE Geomembrane is a
geosynthetic liner which is formed as a result of extrusion of high density polyethylene and
shaped homogenously by calender system. It can be used in all projects where impermeability
is required.
Types:
HDPE Flat Geomembranes
HDPE one-side textured geomembranes
HDPE two-side textured geomembranes
LDPE geomembranes
LLDPE geomembranes
VLDPE geomembranes
HDPE T-Grip geomembranes
HDPE Discrete T-Grip geomembranes
HDPE one-side geotextile laminated geomembrane
Use Locations:
Landfills
Waste water repository and treatment
Drainage pits for collecting leakage of gold
and other mines
Oil tanks and oil fields
Sedimentation ponds
Fertilizer pits
Building foundations, if needed
Irrigation ponds
Tunnels
Irrigation canals
Bioenergy generation plants
Product Featurus
High resistance to chemicals
UV resistant
Less friction rate because of the textured layer
Highly resistant to organic and inorganic solvents
Profoundly resistant to the fractures
Resistant against natural conditions
Resistant to punctures and cracks
Low permeability
Higher tensile strenght
Ahed PVC Geomembranes are geosynthetic liners manufactured from PVC resin and other
synthetic raw materials and used in waterproofing applications. Ahed PVC geomembranes
have different types for different applications such as for pools, tunnels, irrigation channels,
pipes, building foundations, terraces and water reservoirs.
Use Locations
Building Foundations
Dams, transmission tunnels
Roofs and terraces
Carparks
Waste water treatments
Pools
Pond for agricultural irrigation purposes
Potable water reservoirs
Underpasses
Highway, railway tunnels
Subway stations and tunnels
Irrigation canals
Product Features:
Resistant to plant roots. Can be recycled. Resistant to temperatures between -40C and +70C.
Joints are welded with welding robots which can do double inlet welding. Resistant to aging and
corrusion. Enclosed class E� in combustion, no flame occurs. Long life span. High resistance
to mechanic shocks. High performance in tensile strenght, elongation and elasticity. Keeps high
eleasticity in cold weather conditions, never cracks. Can be manufactured as lamination with
geotextile fabric; UV beam resistant, signal layered (OPTIONAL). Since it is loose laid, it is affected at
the minimum degree as a result of movement in construction. Different colour and dimension options.
UV RESISTANT PVC GEOMEMBRAN:
It is made of PVC. Since it is manufactured
as UV Beam Resistant, it is called Pond
Type� Geomembrane. Because of UV
additive, it is direct sun beam resistant for
ages. That kind of AHED PVC Geomembrane
is comfortabely used without coating the
surface of it. It is manufactured in gray,
blue, yellow colours.
AHED PVC GEOMEMBRANES are
manufactured in a width of 2,10m; standard
lengths of 20m&25m; with thicknesses of
1,00mm & 1,20mm & 1,50mm & 2,00mm &
2,50mm & 3,00mm. When it is demanded,
they are manufactured in optional lengths.
PVC Geomembranes are widely used for tunnel isolation, building isolation, foundation of building, terraces, roofs, swimming pools, potable water ponds etc.
We can provide you high quality Tunnel type signal Layer PVC Geomembranes, Blue antevacterial PVC Geomembranes, Grey coloured PVC Geomembranes for roofs and standard black colour PVC Geomembranes.
We are one of the biggest manufacturer of Geomembranes in Turkiye and we can provide high-quality products and good service.
Please contact us for detailed information and pricing.
Description: PVC Foil Furniture Membrane Coating.
Thickness: 0.30mm thick, 1.26cm wide.
Colors: In various colors and patterns, mainly white plain, white patterned, wooden, and in different colors.
Quantity: 55 Tons (2 X 40Ft containers)
Applications: it has a wide range of usage areas and is suitable for manufacturers of furniture doors, furniture cabinet doors, etc.
Cement and acrylic based, two-component waterproofing material applied internally or externally on concrete, curtain and cement based plasters against leakage and surface water.
