Find Verified Facial Kits Suppliers, Manufacturers and Wholesalers

Product Code Product Description

PRS-ZE0080 Field Inspection Testing Kit

PRS-ZE0082 Field Inspection Pocket Vane Tester

PRS-ZE0082/1 Extension Rod for PRS-ZE0082

PRS-ZE0084 Heavy Duty Pocket Penetrometer, 0-10 kgf/cm2

STANDARDS : ASTM D2573

The PRS-ZE0080 Field Inspection Testing Kit is ideal for geotechnicians, geologists and agronomists. It consists of the PRS-ZE0084 Pocket Penetrometer and of the PRS-ZE0082 Field Inspection Pocket Vane Tester. The instrument is contained in a practical carrying case.

PRS-ZE0080 Field Inspection Testing Kit

Dimensions (packed) 240x210x50 mm

Weigth (approx.) 1.8 kg

The PRS-ZE0082 Field Inspection Pocket Vane Tester is especially designed to measure the undrained shear strength (CU) of cohesive soils, consists of a cylindrical body with a torsional spring and three interchangeable vanes of different sizes used depending upon the expected strength of the soil. The height/diameter ratio of all vanes is 2. During operation the vane is driven for 5-6 cm into the soil and then turned with the handle. Deep measures (i.e. on the top of undisturbed samples) can be obtained using the extension rod. All stainless steel construction. Supplied in a plastic case. Extension rod should be ordered separately.

PRS-ZE0082 Field Inspections Pocket Vane Tester

Vane Dimensions (height x dia.) 32x16; 40x20, 50.8x25.4 mm

Measuring Range 0 to 240 kPa (0-24 N/cm')

Torque Value 5 N - m

Extension Rod 500 mm depth.

Overall Dimensions (assembled) 310x105 mm

Weight 1.3 kg

The PRS-ZE0084 Heavy Duty Pocket Penetrometer is designed for making field classification of cohesive soils in terms of consistency, shear strength and approximate unconfined compressive strength. Heavy duty model is all stainless steel construction, three interchangeable tips: 4.5 mm dia. for very hard soil, 6.35 mm for medium and soft soil, 8.98 mm for soft soil. Supplied complete with plastic case.

PRS-ZE0084 Heavy Duty Pocket Penetrometer

Measuring Range 0 to 10 kgf/cm'

Dimensions (assembled) 210 mm length x 20 mm dia.

Weight (approx.) 0.5 kg

The tissue adhesive Histoacryl consists of monomeric n-butyl-2-cyanoacrylate, which polymerises quickly in connection with tissue fluid. Histoacryl is available in two colours: translucent, special for facial application, and blue, which enables an easy control over the quantity applied in different indications approved

Product Code Product Description

PRS-CM0010 Le Chatelier Mould

PRS-CM0014 Le Chatelier Soundness Kit

STANDARDS : EN 196-3, 450-1, 459-2; EN ISO 9597

The soundness of cement, fly ash for concrete and lime is determined by using the Le Chatelier moulds and Le Chatelier Water Bath (PRS-CM0016) according to the relevant standard.

The Le Chatelier Soundness Kit is supplied complete with;
Le Chatelier moulds 3 pcs.
50x50 mm glass plates 6 pcs.
300 gr Weights 1 pcs.
100 gr Weight, 3 pcs.
Tamping Rod 17 mm dia. x 70 gr
Steel Ruler
Plastic Carrying Case

Dimensions 340x290x80 mm

Weight (approx.) 2 kg

Product Code : Product Description

PRS-A0810 : Accelerated Polishing Machine (PSV),220-240 V 50-60 Hz

PRS-A0812 : Corn Emery 5 kg, for PRS-A0810

PRS-A0813 : Flour Emery 5 kg, for PRS-A0810

PRS-A0814 : Control Stone 50 kg Ungraded, for PRS-A0810, PSV value in the range 50 to 60
PRS-A0815 : Friction Tester Reference Stone (Criggion Stone) 25 kg Ungraded, for PRS-A0810, PSV value in the range 60 to 65


Accelerated Polishing Machine (PSV) is used to accelerate the polishing action of vehicle tyres on a road surface, the resultsare used to develop safer road surfaces. The machine consists of a road wheel rotating at 320 ± 5 r.p.m, driven by a fan cooled electric motor.
Abrasive Corn Emery is fed to the point of contact of the wheel on the test surface for 3 hours, followed by feeding Emery Flour to polish the surface being tested for a further 3 hours. Subsequent skid tests are carried out on the test samples using suitable portable skid test equipment.

PRS-A0814 Control Stone and PRS-A0815 Friction Tester Reference Stone should be ordered separately.

The Accelerated Polishing Machine is supplied complete with;
Road Wheel,
Side Plate,
Rubber Rings,
Solid Rubber- Tired Wheel - 2 units,
Drive Belt,
Abrasive Feed Mechanism,
Corn Emery - 5 kg,
Flour Emery - 5 kg,
Tool Kit,
Specimen Moulds - 2 pcs,
2 Mould Plates


Road Wheel Speed 315 to 325 r.p.m

Dimensions 740x720x1520 mm

Weight (approx.) 175 kg

Power 850 W

Please see our catalog on our website.

6060002459, 3128259846, 3128259218, 9121701750, 9121667650, 9121704550, 9121598750, 3115347390, 3115188090, 3128209144, 3217983446, 3128259258, 9121591350, 3128312566, 9120099305, 5537193100, 3128259405, 6060012533, 3128321936, 6060012524, 9121669650, 3115101093, 9120099313, 3115917091, 9120099007, 3128259254, 9120099306, 6060012533, 6060001838, 3115915099, 3128259405

It is the components which allows the car to switch from fuel to gas. It is also showing the reserve level. There is a buzzer inside the component for sound warnings.

All of our products have 2 years of warranty and 7/24 of online service.

It is manufactured according to the ECR 67-01 standards. It lets the gas inside the tank to enter or exit for storage or usage purposes. By its coiled structure, it cuts the gas from the tank when the car is stopped. It is designed by using European Orings. Moreover, the multivalve ball is an imported part.

All of our products have 2 years of warranty and 7/24 of online service.

This product enables the LPG to be filtered and its design allows the inside material to be changable. It needs to be renewed every 20,000 KMs. It is important to filter undesired materials in order to get a better performance.

All of our products have 2 years of warranty and 7/24 of online service.

Ramses autogas equipments, new SGI reducer for LPG sequential system. Ramses LPG-CNG conversion kits.

Type: Godzilla06 with coil (Type A) - Godzilla06 without coil (Type B)

It reduces the pressure of the gas coming out from the cars LPG tank to degraduate to the necessary level needed and at the same time, through the cycling of hot water inside the reducer, they provide the LPG to the switch completely to gas phase. The security coil helps to stop the gas. It works between 0-3 bars of pressure. Our reducers are two types as with coil and without coil. Both types include a filter inside which is very easy to change. Since it has tiny structure, it provides the chance to be installed very easily and the arms are metal, so, it does not get deformed.

All of our products have 2 years of warranty and 7/24 of online service.

The working principle of sequential systems are based on the pressure. Some of the information needs to be transferred to the electronic control system(ECU). These informations are provided by the sensors. When the information is converted to the mathematical data,then, the electronic control unit has the control over these information. At this point, the MAP Sensor measures the pressure values. It measures the reducer pressure together with inside pressure of manifold, exhibiting the delta pressure for adjusting tunning settings for the poor/rich mixture. It is also a piece which could sense the defect that can be caused by the decrease in the pressure or when the gas runs out, it switches to fuel. We have two types of MAP Sensors as version 1 and version 2.

All of our products have 2 years of warranty and 7/24 of online service.

It is manufactured according to the ECR 67-01 standards. There is also a drain plug which can evacuate the toxin wastes.

It is an electronic type carburetored reducer. It reduces the pressure of the gas coming out from the car's LPG tank to degraduate to the required level and at the same time, through the cycling of hot water inside the reducer, they provide the LPG to switch completely to gas phase. The security coil helps to stop the gas. It is manufactured according to the ECR 67-01 standards. There is also a drain plug which can evacuate the toxin wastes. It has an easy tunning and hard to detune structure.

All of our products have 2 years of warranty and 7/24 of online service.

Kit-valve inc. plate & fixing screw x1 - 459/M2874

JCB product numbers are reference purpose only.

Elevate your research with our premium selection of PCR, molecular, and genetic reagents and consumables

Product Highlights:

PCR Reagents: Unlock precise DNA amplification with our state-of-the-art PCR reagents. Achieve reliable results for a range of applications.


Genetic Reagents: Drive your genetic studies forward with high-quality reagents designed for accuracy and reproducibility.

Consumables: Discover a wide array of consumables, including tubes, plates, and pipette tips, crafted to meet the demands of your laboratory work.

Ramses autogas equipments, new injector for LPG sequential system. Ramses LPG-CNG conversion kits.

Type: 1,2 and 3 OHMS.

There are 3 types of injectors as 1,2 and 3 ohms. Our injectors which are sensitively calibrated are manufactured using European Orings which enables it to work silently and long lasting. The structure of the injector also provides easy installation, cleaning and repair possibilities.

All of our products have 2 years of warranty and 7/24 of online service.

i) Used for sample-to-result SARS-CoV-2 detection in less than 60 minutes with only 3 minutes hands on time
ii) There is no need for any instrument other than real-time PCR devices such as nucleic acid extraction robots, microcentrifuges and incubators.
iii) Compatible with wide range of real-time PCR instruments produced by Roche, Bio-Rad, Qiagen, Thermo and BMS.

General : Ean 3276428270258
Status normal
Trade numbers 320046
Supersedes 805232
Criteria : New part
Number of teeth 18
Hub profile 18x50x45 [mm]
Eject force [n] 35000
Control design pull switch control.
Thickness [mm] 10
Diameter [mm] 430
Manufacturer restriction valeo.