Dental cabinet, technician workbench, laboratory cabinet, benches, furniture, dental equipment, dental furniture.
Playground set, benches, gazebo, picnic table, stadium seat, children park, playground, garden.
Bench for 8 and 15 People (YK01)
Product Code Product Description PRS-A1000 Specific Gravity Frame PRS-A1003 Plastic Water Tank PRS-A1005 Cradle for Hardened Concrete Specimens PRS-A1010 Density Basket Ã? 200 mm x 200 mm deep The Specific Gravity Frame is used in conjunction with a suitable electronic balance for specific gravity determination of fresh and hardened concrete and aggregates. Consisting of a purpose built robust frame designed to support the electronic balance (not supplied), a wire basket and plastic water tank. The lower part of the frame incorporates a moving platform, which carries the water tank allowing the test specimens to be weighed in both air and water. Any type of electronic balance fitted with under-bench weighing facility can be used. Balance, Cradle and Density Basket should be ordered separately. The Specific Gravity Frame is supplied complete with; â?¢ A water tank Dimensions 600x500x1100 mm Weight (approx.) 25 kg
Laminar Flows Product Code Product Description PRS-KU1480 Laminar Flow (Fume Hood) Over the Counter Type PRS-KU1482 Laminar Flow (Fume Hood) - Cabinet Type STANDARDS Some tests, especially extraction methods, require the use of volatile toxic chemicals which are hazardous to health, and these gases are subject to occupational exposure limits as described in relevant legislation and regulations The PRS-KU1480 and PRS-KU1482 , Over The Counter and Cabinet Type Fume Hoods are especially designed to remove toxic gases from the test area. Bespoke Fume Hoods with specific dimensions and properties can be supplied to meet specific requirements, pleasecontact PARSROS for more information. Standard Features Stoneware Bench Water and gas fittings 2 x double Electric Socket, 220 V Galvanized frame Legs that made from hard PVC to be protected against corrosion, Second air drained part for draining heavy gases, Standard flammable gas tap for LPG, Acetylene, Propane, Butaneâ?¦etc, Pressure Reducing Regulator, Laminated or Tampered glass Optional Features Digital Indicator and control panel , Fan min. 1200 m3/h capacity Trespa Top Lab Plus or Epoxy Resin type bench surface, Demineralized water fitting Product Code Dimensions Weigth(approx.) PRS-KU1480 1500x900x1620 mm 250 kg PRS-KU1482 1500x900x2350 mm 300 kg
Product Code Product Description PRS-AS0056 Automatic Marshall Stability Test Machine, 50 kN, 220-240 V 50-60 Hz PRS-AS0056/110 Automatic Marshall Stability Test Machine, 50 kN, 110 V 60 Hz PRS-AS0057 Breaking Head (Stability Mould) 4â?� PRS-AS0058 Breaking Head (Stability Mould) 6â?� PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058 PRS-AS0063 Indirect Tensile Splitting Device for Compacted Bituminous Samples 100 mm (4â?�) Dia. STANDARDS : EN 12697-34, 12697-23, 12967-12 (Method A and Method B up to 51 mm/min); ASTM D1559, D5581, D 6927; AASHTO T245 The PRS-AS0056 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures. The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounting compression frame with motor and worm gear housed within the base unit. The speed of the lower platen can be adjusted between 6 mm/min to 60 mm/min using the Data Acquisition and Control Unit. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The machine can be hand operated by a lateral hand wheel for calibration purposes. The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values and the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head. The PRS-AS0056 Automatic Marshall Stability Machine is suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.
Product Code Product Description PRS-ZE0852 CBR Test Machine with Load Ring, 50 kN capacity, 220-240 V 50-60 Hz PRS-ZE0852/110 CBR Test Machine with Load Ring, 50 kN capacity, 110 V 60 Hz STANDARDS NF P94-078; UNI CNR 10009 The PRS-ZE0852 is designed for performing laboratory evaluation of the CBR value of highway sub bases and subgrade and for the determination of strength of cohesive materials which have maximum particle sizes less than 19 mm (3/4â?�). The PRS-ZE0852 is designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals. The machine is designed to be mounted on a suitable bench and comprises of a robust and compact two column frame with adjustable upper cross beam. The frame has 50 kN capacity. Two test speeds are provided 1.0 mm/min for BS and 1.27 mm/min. for ASTM/EN/AASHTO tests. This main feature allows the user to perform tests complying to BS or ASTM/EN/AASHTO standards with the same machine. Loading and unloading are down from the front panel by UP/DOWN buttons. Unloading speed is udjusted 5 mm/min for easy re-testing. The CBR Test Machine is supplied complete with; â?¢ Load Ring, 50 kN â?¢ Digital Gauge with Connection Part, 25x0.01 mm â?¢ Penetration Piston
Marshall Stability Test Machine with Digital Readout Product Code Product Description PRS-AS0055 Marshall Stability Test Machine with Digital Readout Unit, 50 kN, 220-240 V 50-60 Hz PRS-AS0055/110 Marshall Stability Test Machinewith Digital Readout Unit, 50 kN, 110 V 60 Hz PRS-AS0057 Breaking Head (Stability Mould) 4â?� PRS-AS0058 Breaking Head (Stability Mould) 6â?� PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058 PRS-AS0063 Indirect Tensile Test Jig for Compacted Bituminous Samples 100 mm (4â?�) & 150 mm (6â?�) Dia. STANDARDS : EN 12697-34, 12697-23, 12697-12 (Method A); ASTM D1559, D5581, D 6927; AASHTO T245 The PRS-AS0055 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures. The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounted compression frame with motor and worm gear housed within the base unit. The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values, the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head and two digital readout units (one for load and another for displacement) The PRS-AS0056 Automatic Marshall Stability Machine is also suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581. The machine can be hand operated by a lateral hand wheel for calibration purposes; the hand wheel is supplied complete with the machine. Platen Speed 50,8 mm/min Capacity 50 kN The PRS-AS0055 Marshall Stability Test Machine is supplied complete with; â?¢ Load Cell, 50 kN â?¢ Linear Potentiometric Displacement Transduce with Bracket, 25x0.001 mm â?¢ Hand Wheel for Manual Control â?¢ Breaking Head, 4â?� Dimensions 550x700x1200 mm Weight (approx.) 102 kg Power 1100 W
