Production capacity is between 1500-1900 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 800-1000 pieces. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 2000 and 2300 units per hour and it is able to produce paving stone and briquettes in capacities ranging from 1200-1500. manual, semi-automatic and fully automatic preferred fixed machines.
The production capacity is 2600-3000 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 1500-2000 units. manual, semi-automatic and full automatic preferred fixed machines
Hourly production capacities ranging amount capable of producing briquettes 5500-6300 ratchet paving stone production capacities and can vary from 4000-4500 units, are semi-automatic and fully automatic machine preferably constant.
Our mobile designed walking briquette machines are designed in two different types, which press on the concrete or put pressure on a table and leave it on the concrete. NOVAL INC. It produces semi-automatic and fully automatic walking briquette machines capable of producing briquettes with capacities ranging from 1200 to 1400 units per hour. They are able to manufacture briquettes without the need for printing pallets. They only use concrete surfaces with a smooth surface
Product Code Product Description PRS-CM0075 Manuel Mortar Mixer, 220-240 V 50-60 Hz PRS-CM0075/110 Manuel Mortar Mixer, 110 V 60 Hz PRS-CM0076 Spare Bowl for PRS-CM0075 and PRS-CM0085, 5 L PRS-CM0078 Spare Beater for PRS-CM0075 and PRS-CM0085 STANDARDS : EN 196-1, 196-3, 413-2, 459-2, 480-1, 1015-2, 12617-4; ASTM C187, C305, AASHTO T129, T131, T162 The PRS-CM0075 Manual Mortar Mixer has a 5 liter (approx.) capacity, it has been designed to mix mortars and cement pastes primarily to the requirements of standards. The mixing paddle revolves at a rate of 140 rpm. with a planetary motion of 62 rpm. in low speed. In high speed, the paddle revolves at the rate of 285 rpm. with a planetary motion of 125 rpm. The user can choose the speeds easily by using the switch fitted to the machine. There is a sand filling apparatus on the mixer to pour sand easily. The bowl and beater are easily fitted and removed from mixer. The Manual Mortar Mixer is supplied complete with; Bowl, 5 L (approx.) Beater Dimensions 300x555x610 mm Weight (approx.) 54 kg Power 200 W
Automatic Cement Compression & Flexure Testing Machines Product Code Product Description PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz PRS-CM0116 Upper Loading Platen with Ball Seating Assembly :165 mm and Lower Loading Platen,:165 mm PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1 The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator. Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately. The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are; â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.) Choosing the compression or flexure frame by using the changeover valve. Pressing the START button on the control unit. The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure. Automatically saves the test parameters and test results. The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system
ZIM T1200 machine can produce pipes 300mm - 1200mm diameter and 500mm - 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There exists motrar bunker and motrar filling systems on machines. Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Special designed strong chassi of the machine enables long live producing without errors.
ZIM 820 Concrete Pavers and Block machine can operated semi automatically with the control of the operator. Upon request, it can be manufactured fully automatic with PLC control. By changing moulds all kinds of pavers stone , curbs, block and precast concrete elements such as grass pavers series can be produced in a serial way. 20cm block can be produced 8 units in one press with the machine,or 20 interlock stones can be produced in a press. Machine is able to produce the insulated block upon demand. Our companyâ??s special production vibrator is used. Thus, it can produce smoothly and quickly. Collector Robot (cuber) can be used to empty the dried products on the production pallets. A model with a single hopper, ZIM 8, is also available for manufacturing single layer bricks/pavers, hollow block, and for special blocks/pavers.
ZIM 1536 PLUS Block and Paverstone Machine is special design machine for block and interlock production that works fully automatic.The movement of the machine is programmed the PLC microprocessor computer. By changing moulds all kinds of blocks, paverstones, curbstones, grass stones, lentos and precast concrete elements can be produced in a serial way. 20cm block can be produced 15, interlock paverstones can be produced 36 units in one press. Machine is able to produce the insulated block upon demand. Thanks to special features developed by our engineers machine have very short cycle time. For example mould changing is wery easy and take short tme in new system. Automation system and operator panel which is developed and redesigned in long years become user friendly and useful. With our special design vibration table you can produce high quality products with less energy. We use pneumatic bellows in machine mould connections, due to this system vibration on mould is expanded regular and uniform. Service and maintenance is easy thank to our strong machine chassis and ergonomic design
Box Culvert Machine; It produces Concrete Culverts between 800 - 800mm and3000 - 3000mm in minimum 1000mm and maximum 2000mm lengths. Production is made by connecting a single mold in all sizes. Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are used in the vibrator.
KMS 1400 New Generation Concrete Pipe Machine; It produces Concrete Pipes from 300mm to 1400mm in line with the demands of our customers, from minimum 1000mm to maximum 2500mm in length in accordance with Iller Bank TSE 821 specification. It is manufactured in a way to make double or triple production according to customer demands. Three molds for300mm Concrete Pipe, two molds for 400, 500, 600mm Concrete Pipes and one mold for other diameters can be connected at the same time. â?¢ Molds and Pallets with Integrated Gasket or Drop Section Gasket are produced in line with the demands from �?300mm to �?1400mm. â?¢ It provides the possibility of mass production from �?300mm to �?1400mm without crane, it produces 2 times more than the system with crane. Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are used in the vibrator. Pallets; It is produced on CNC lathes according to its dimensions and by pressing method. Manufactured Concrete Pipes are transported to the Drying area by Forklift.
KMS 800 Triple System Concrete Pipe Machine; It produces Concrete Pipes between 150mm and 800mm in minimum 1000mm and maximum 2000mm lengths in accordance with Seller Bank TSE 821 specification. Three molds for 150mm and 200mm Concrete Pipes, two molds for 300mm Concrete Pipes and one mold for other diameters can be connected at the same time. Molds and Pallets with Integrated Gasket or Drop Section Gasket are produced in line with the demands from �?150mm to 800mm. Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are used in the vibrator. â?¢ Pallets; It is produced on CNC lathes according to its dimensions and by pressing method. Manufactured Concrete Pipes are transported by forklift and shipped to the Drying area. Triple System Concrete Pipe Machine has been designed to produce concrete pipes in the fastest and fastest way.
Ugur Makina UMA-110 series Mobile Primary Jaw Crusher Unit has been designed to meet the needs of our customers with compact solutions such as hydraulic feet, foldable conveyor and bunker chamber options that provide the advantage of easier installation in a shorter time. With its high capacity and performance, it ensures that all needs are met. The Mobile Primary Jaw Crusher Unit is shipped in accordance with international shipping standards. Technicial Specifications Model: Uur Makina UMA-110 Capacity: 100-300 t/h Feeder type : UMG03 - 2x8kw Bunker Volume: 1 unit - 30 m Crusher Type: 1 unit UMK110 - 132kw Crusher Output Band: 1200x8000 - 11kw Uur Makina UMA-110 Mobile Primary Jaw Crusher Equipment: Primary Jaw Crusher (UMK110) Vibrating Feeder UMG03 Mobile Chassis with axle and tires Hydraulic Feet Folding Type Belt Conveyor Please CALL us for our other Crushing plants and customer-specific solutions
Application area; especially operating theatres, pharmaceutical industry, chemical industry, food production, electronic industry and research laboratories. Sensitive applications in aforementioned application areas require a ventilation system suitable for conditions specified in standards.Gonka laminar flow extract systems reduce microorganism contaminants and particulate concentrations in air to the minimum level in accordance with the standards. Hepa filters which clean filtrated air before going into operating room. Mounting situated in ceiling of the operating theatre in such a way that it should locate over operating table. Stainless steel air distribution box, hepa filters, transparent air distributor (laminarizator) and pendant operating table lighting connection. Easy maintenance and disinfection because of transparent air distributor's being pulled down. Operating theatre lighting system made up of airproof construction. A laminar, vertical air flow from transparent air distributor through operating table prevents turbulent air flow in conventional air systems and offers a high level cleanliness class around the operating table during the operati The system which remove particulates and microbes from operation part due to laminar flow. Special design for operation theatres which require especially high level sterilization in accordance with din 1946. Differential pressure sensors. Easy connection differential pressure sensors and leakage testing. Easy installation to all kinds of ceilings. Depends model
Air handling unit (ahu) 8 different models which provide required humidity and temperature by conditioning air volume in wide ranges. Standard series Application area: business centers, schools, hospitals, factories, hotels and restaurants. 8 different models which provide required humidity and temperature by conditioning air volume in the range of 3000m¦/h and 100.000 m¦/h. The framework which is formed by combination of aluminum frames, which are connected specially, with plastic and aluminum comers. Boards which are made up of double skilled galvanized iron in a standard way. Polyurethane insulated panels, which are 30 mm in thickness, for thermal and acoustic insulation in a standard way. Standard accessories; Filter chambers; chamber design which provides easy mounting and de-mounting in filters and filters with different productivity levels on demand. Heating and cooling coils; seamless cooper tubes. In heating coils, 4 options: warm water, vapor, hot water, electrically heated; in cooling coils, 2 options: chilled water and dx (direct expansion). Dampers; rigid aluminum frame in multi airfoil structure which is the least resistant against airflow. Rubber gaskets which reduce air leakage through blades to the minimum level. Fans; statically and dynamically balanced aspirators and ventilators in double inlet belt driven centrifugal type. Forward curved fans in systems with low, medium and high duct pressures, . Optional accessories; Gonka vapor humidifier, standard vapor cylinder, immersion electrodes, stainless vapor distributor and microprocessor control unit. Mufflers which are made up of coulisses to provide required sound holding capacity. Plate heat exchanger or heat recovery wheel for recovery of the heat emitted with exhaust air. Electrical board. Frequency converter Depends on the size, model and chambers
Gonka packaged hygienic air conditioning units have been designed for meeting the special requirements of clean rooms Application area; gonka packaged hygienic air conditioning units have been designed for meeting the special requirements of modern operating theatres, clean rooms in pharmacy, agriculture, food and aeronautics industries. Highly efficient filtration of supply and extract air. Maximum function control: room temperature and relative humidity control throughout the year. Meeting fresh air that surgical operations require Quiet and non-vibrating operation that operating theatres require. An independent system which is under direct control of authorized health staff. Pressure control in aseptic and septic surgical operations. Continuous control of room temperature and humidity. Quiet and non-vibrating operation. Replacing the old installation in available places and generally, because their sizes are small, occupying less room than any time before, however available air canal and water installation could be, easy erection in any type of health institutions. Depends model
Application area; hotels, offices, business centers, restaurants, hospitals. Gonka screw compressor water cooled liquid chillers, with its models in the range of high efficiency and high capacity, are ideal for cooling operations related to comfort and industrial purposes. R22 , r134a or r407c options. Compressors; self hermetic screw compressors. Compressors changing between 1 and 4 according to cooling capacity. Condenser; highly efficient, easily used and maintained, double mirrored finned copper piped shell- tube condenser. Evaporator; shell- tube evaporator whose cooling liquid side and water side have one-circuit, multiple transitional, two mirrored construction. Cooling circuit; cooling circuit and circuit elements entirely independent for every compressor. Electrical screen and control board; board including switch and micro-processor based controller unit and control cards as well as elements such as systemic control elements and fuse, contactor, thermal magnetic switch and relay. Micro-processor based control system; full control over all the cooling circuits. Connections on board through simplified device failure follow-up and easily recognized electrical diagram. Low noise level. Multiple compressor, multiple cyclical, high efficiency. %25-%100 modulating capacity control in every compressor. Tough construction and long life. Easy handling, installation and service. Compatible with available bms systems. Meeting consumer requirements in the most suitable way through broad accessory and option alternatives. Newly improved use of screw compressor with high cop value. Rational control. Depends model
Elevator
With competitive prices and high quality elevators